What is smallest diameter pipeline that may be used to carry

Assignment Help Civil Engineering
Reference no: EM13309395

What is the smallest diameter pipeline that may be used to carry 6.3 L/s (100 gpm) of water if the flow is to be laminar?

Reference no: EM13309395

Questions Cloud

Explain what would the rate constant be at a temperature : Given that the initial rate constant is 0.0130s^-1 at an initial temperature of 20 degree celcius , what would the rate constant be at a temperature of 100 degree celcius
Determine the minimum possible area of the metal plate : A circular hole of diameter 11.42 + and - 0.03 inches is cut out of the plate. Also, using the tolerances given, determine the minimum possible area of the top surface of the metal plate.
At what depth will 400 cfs flow uniformly in an earth lined : At what depth will 400 cfs flow uniformly in an earth lined (n = 0.025) trapezoidal canal of base width 15 ft having side slopes 1 on 3 if the canal is laid on a slope of 1 in 10,000.
What is the distance between the stations : A light-rail train going from one station to the next on a straight section of track accelerates from rest at 2.37 m/s2 for 15.9 s. What is the distance between the stations
What is smallest diameter pipeline that may be used to carry : What is the smallest diameter pipeline that may be used to carry 6.3 L/s (100 gpm) of water if the flow is to be laminar
Tin carbonate solid is treated with nitric acid to dissolve : Tin carbonate solid is treated with nitric acid to dissolve tin carbonate to give tin nitrate, water and carbon dioxide. a) Write a balanced equation for the reaction.
At what equal height above shorline should target be located : A surveyor is going to take a 5.5 mile sight across a lake from the top of one tower to a target on the top of another tower. It is desired to keep the line of sight 6 ft above the lake surface.
How wide should the expansion cracks between the slabs : A concrete highway is built of slabs 14m long (20 degrees Celsius). How wide should the expansion cracks between the slabs be
Purpose of rent control and the intended effect on consumers : Explain the purpose of rent control and the intended effect on consumers and suppliers of rental property. Does rent control achieve its purpose?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the required elevation drop of trapezoidal channel

A clean-earth trapezoidal channel with a bottom width of 1.8 m and a side surface slope 1:1 is to drain water uniformly at a rate of 8 m^3/s to a distance ok 1 km. If the flow depth is not to exceed 1.2 m,

  Determine if a simple supported w beam has the capacity

Determine if a simple supported W 12x26 (A36 steel) beam has the capacity to support loads that produce 50 kips of live-load shear and 20 kips of dead-load shera.

  How to determine the critical depth by interpolation

water flows from a lake into a steep natural channel. the water surface elevation of the lake is 97.0 with respect to the datum. the channel properties are given below. determine the flow rate in the channel

  What is the greatest bending moment and where is it located

A cantilever beam of length 50 ft is embedded in a wall at A and has a free end B. A concentrated load of 100 kips upward is located at x = 25 ft from A. A uniformly distributed load of 20 kips/ft downward extends from 25 to 50 ft.

  Determine what should be the magnitude of the load p2

A second load P2 is uniformly distributed around the cap plate at B. The diameters and thicknesses of the upper and lower parts of the post are dAB= 1.25 in, tAB= 0.5 in, dBC= 2.25 in and tBC= .375 in respectively.

  Determine the minimum thickness t of the wall of the tank

A cylindrical tank having a diameter d=2.5 inches is sunjected to internal gas presuure p=600 psi and an external tensile load T=1000 lbs. Determine the minimum thickness t of the wall of the tank

  Calculate entropy increase assuming constant specific heat

A paddle wheel, inserted inserted into the volume, does 720 KJ of work on the air. If the volume is 2 cubic meters, calculate the entropy increase assuming constant specific heats.

  What is the final temp and the final mass of air in the tank

an insulated tank is evacuated. Air from the atmosphere at 12 psia and 70 degrees farenheight is allowed to flow into the 100 cubic foot tank. What is the final temp and the final mass of air in the tank just after flow ceases.

  Compute the after-tax rate of return on the vessel

At the end of the 6 years, the oil company exercised its option and bought the vessel. The chemical company has a 34% incremental tax rate. Compute its after-tax rate of return on the vessel.

  Determine the magnitudes of the velocity v and acceleration

A particle which moves in two-dimensional motion has coordinates given in inches by x=t^2-4t+20 and y=3sin2t, where the time t is in seconds. Determine the magnitudes of the velocity v and the acceleration a and the angle between these two vectors..

  Determine the total number of unit cells in the foil

aluminum foil used to package food is approximately 0.001 inch thick. assume that all of the unit cells of the aluminum are arranged so that a is perpendicular to the foil surface.

  Calculate the mass flow rate for the concentrate stream

A magnetic separator processes 500 kg/hr of finely ground magnetite ore (Fe3O4). The ore containes 35% magnetite and an analysis of the concentrate and tailings shows that they contain 59.5% Fe and 3.8% Fe

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd