What is shear force exerted by oil on m long section of pipe

Assignment Help Civil Engineering
Reference no: EM13298227

Crude oil (density p=847kg.m^-3, viscodity (mu)=0.002 Pa.s) flows in a circular pipe of radius R=30 cm. The maximum speed of the oil at the centre of the pipe is u(max)=0.5 m/s. the flow profile is such that u=u(max)*(1-(r/R)^2) where u is the flow speed and r is the distance from the centre of the pipe in the radial direction. What is the shear stress on the pipe wall? What is the shear force exerted by the oil on a 1m long section of the pipe?

Reference no: EM13298227

Questions Cloud

Find what must be the composition in copper-nickel alloy : It is desirable to produce a copper-nickel alloy that has a minimum noncold-worked tensile strength of 390 Mpa and a ductility of at least 40% elongation. Is such an alloy possible If so, what must be its composition
How would that emphasis affect the ratios : Financial ratio analysis is conducted by three main groups of analysts: credit analysts, stock analysts, and managers. What is the primary emphasis of each group, and how would that emphasis affect the ratios they focus on?
What proportion of connectors fail during warranty period : The probability is 1% that an electrical connector that is kept dry fails during the warranty period of a portable computer. If the connector is ever wet, the probability of a failure during the warranty period is 5%.
Describe what is the heat capacity of the bomb : When 2.9683 g of benzoic acid are burned in a calorimeter, the temperature rises from 21.84 C to 24.67 C. What is the heat capacity of the bomb
What is shear force exerted by oil on m long section of pipe : the flow profile is such that u=u(max)*(1-(r/R)^2) where u is the flow speed and r is the distance from the centre of the pipe in the radial direction. What is the shear stress on the pipe wall What is the shear force exerted by the oil on a 1m lo..
What is the investments profitability index : The discount rate that your firm uses for projects of this type is 13.25%. What is the investments profitability index?
What fraction of a hydrogen atom is occupied by the nucleus : The nucleus of a hydrogen atom is a single proton. The radius of a proton is approximately 1 fm. What fraction of a hydrogen atom is occupied by the nucleus
Discuss the varying views of the criminal justice system : Discuss the varying views of the criminal justice system as it currently operates: the process, network and non-system. Do the three justice components (police, courts, corrections) constitute a true system?
Evaluate the ph of a solution made by adding sodium acetate : Calculate the pH of a solution made by adding 40. g of sodium acetate, NaCH3COO, to 21 g of acetic acid, CH3COOH, and dissolving in water to make 700. mL of solution

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the slenderness ratio

Determine the slenderness ratio of a 5 m column with built in ends if its cross- section is (a) circular with a radius of 40mm and (b) 50 mm square. Use the concept of effective length.

  Determine the cycle time for a single engine scraper

Determine the cycle time for a single engine scraper rated at 21 cy heaped that is used to haul material from a pit to a fill 900 ft away under severe conditions. The average haul speed will be 14 mph and the average return speed will be 20 mph.

  Calculate the ieee double precision floating number

Calculate the IEEE double precision floating number immediately greater than the minimum number in double precision in both binary and decimal form

  What is the ph of the solution

What is the pH of the solution created by combining 0.90 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)?

  Explain about atterberg limits and cohesion for shear test

What relationship between Atterberg limits and cohesion for Shear test

  Determine the moment of the force about line joining points

the triangular plate ABC is supported by ball and socket joints at B and D and is held in the position shown by cables AE and CF. If the force exerted by cable AE at A is 1000N , determine the moment of the force about line joining points D and B.

  Elastic modulus of steel

Given: elastic modulus of steel is 200 GPa, yield and ultimate tensile strength of steel are 600 and 750 MPa, respectively.

  Find what is the outflow effluent g-loop concentration

A completely mixed continous bioreactor used for growing oenicilin operates at a zero orer system. The input glucose is converted into various organic yeats. the flow rate ti this system is 20 liters per minute and the conversin rate is 4 mg/(min-..

  Determine the force developed in the link

The coefficients of kinetic friction between the blocks and the inclined plane are a=0.1,b=0.3. Neglect the mass of the link. Angle between the inclined plane and the surface is 30 degree.

  Angular acceleration of the spool

determine the angular acceleration of the spool and the acceleration of the trailer. The wheels have negligible mass and are free to rotate.

  Esimating the capacity of the roadway

Given s=.30/(60-u), where s is the spacing (space headway) in miles, and u is the speed in miles per hour, derive the relationships u-k, u-q, and q-k. Also, estmate the capacity (qmax) of the roadway.

  Determine diameter of 200 m section commercial steel pipe

determine diameter of 200 m section commercial steel pipe (darcy's friction factor f = 0.0115) that carries a flow of 0.24 m^3/s and allowable head loss ove the section is 3.5 m.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd