What is maximum area of spill in if flashover to be avoided

Assignment Help Civil Engineering
Reference no: EM13300069

An industrial building has floor area of 5 m by 8 m and is 3 m high with a door 1 m wide and 2 m high. Leakage of transformer oil from a pump occurs and is ignited. What is the maximum area of spill in (m^2) if flashover is to be avoided. Assume the construction materia to be lightweight concrete and perform the calculations at a characteristic time of 10 minutes after ignition.

Reference no: EM13300069

Questions Cloud

Ensure the effectiveness of the above principles : What strategies can you implement to ensure the effectiveness of the above principles? Which do you think would be the easiest to implement? Why?
Discussed as local problems caused by lack of regionalism : Detroit’s Empowerment Zones are described as: The generalized economic development term of art used to describe Empowerment Zones is: All of the following were discussed as local problems caused by lack of regionalism except:
How much energy is required to ionize this atom : A hydrogen atom is initially at n =3 state. How much energy is required to ionize this atom
The discounted payback period method : CEO of Acme, Inc. located in the United States. You use the discounted payback period method and accept all projects that payback in three years. You are considering a project that will cost $5,500,000 and will produce one cash flow that occur..
What is maximum area of spill in if flashover to be avoided : An industrial building has floor area of 5 m by 8 m and is 3 m high with a door 1 m wide and 2 m high. Leakage of transformer oil from a pump occurs and is ignited. What is the maximum area of spill in (m^2) if flashover is to be avoided.
Find the maximum possible kineticenergy acquired by electron : An x-ray photon with wavelength 5.0 pm collides with a free electron initially at rest. find the maximum possible kinetic energy acquired by the electron
Define standard enthalpies of formation to determine : Use standard enthalpies of formation to determine ?Horxn for: 3NO2(g) + H2O(l) ? 2HNO3(aq) + NO(g) Enter in kJ. Find the change in internal energy for this reaction. Enter in kJ.
The urban planning context : Which of the following Detroit Suburbs was discussed as a particularly well-planned city? An example of a noxious uses (in the urban planning context) described is:
Calculate average gas temperature in upper layre of room : A steady fire with an energy release rate of 500 kW occurs in a room 3m wide, 3m long, and 2.4 m high, with a door opening which is 1.8 m high and 0.6m wide. the ambient temperature is 20 degree celcius.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Depth of the sedimentation tank

A drinking water treatment plant will be designed to process a flow of 15,000 m3/d. The sedimentation tank will have a residence (detention) time of 4 hours and the overflow rate (Q/A) of 16 m 3 /m 2 -day. Estimate the required surface area (A), an..

  Calculate the ph of a 1-l solution containing sodium acetate

Calculate the pH of a 1-L solution containing 0.01 M sodium acetate after the addition of 3 mL 0.5 M H2SO4

  How much does the aggregate in the wheelbarrow weight

you fill a 2-cubic foot wheelbarrow to the top with aggregate. if the specific gravity of the aggregate is 2.548 and 18% of the aggregate is void spaces, how much does the aggregate in the wheelbarrow weight?

  Percent by weight of limestone

A slurry containing 20 percent by weight of limestone (CaCO 3 ) is processes to separate pure dry limestone from water. If feed rate is 2000kg/h, how much CaCO 3 is produced per hour?

  Operational changes to prevent river from contamination

assuming that the contaminant travels mainly by advection, propose any operational changes to the given layout to prevent the river from being contaminated.

  Four-lane freeway on a mountainous terrain

A four-lane freeway is on a mountainous terrain with 11-ft lanes, a 5-ft right-side shoulder, and a 3-ft left side shoulder. During the peak hour there are 12% trucks and buses and 6% recreational vehicles.

  Determine the friction force exerted on the plate at a

The frame is supported in part by normal and friction forces between the wall and the plate at A. Determine the friction force exerted on the plate at A. Also determine the minimum required coefficient of friction at A for the frame to remain in e..

  Determine is the flow rate typical for a bathroom faucet

Water in a household plumbing system originates at the neighborhood water main where the pressure is 480kPa, the velocity is 5m/s, and the elevation is 2.44 m. A 19 mm (3/4-in) copper service line supplies water to a two-story residence

  What is the level of service on a km long percent upgrade

A rural freeway has an ideal free-flow speed of 120 km/h and two 3.6 m lanes in each direction, with right shoulder lateral clearance of 1.2 m. Interchanges are spaced approximately 5 km apart. Traffic consists of 10 percent trucks and buses and 8..

  Define base isolation technique has become the method

Base isolation technique has become the method of choice for structural design of buildings and bridges located in highly seismic areas in recent years.

  Find the maximum area that the rancher can enclose

A rancher has 1200 ft of fencing to enclose a double paddock with two rectangular regions of equal areas. find the maximum area that the rancher can enclose.

  Estimate the settlement of 10ft and 5ft square footing

Footings for a structure are to be built beneath a basement slab on a clay soil at a depth of 20 ft below present ground level. The groundwater table is 15ft below the ground surface. The soil void-ratio is about 0.087.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd