What is force p to move cabinet if caster a and b are locked

Assignment Help Civil Engineering
Reference no: EM13324149

A 120 lb cabinet is mounted on casters that can be locked to prevent their rotation. the coefficient of static friction is 0.30. if h = 32 in. what is the force P to move the cabinet if a) caster A and B are locked b) B is locked A is free to move c) A is locked B is free to move p is applied from the left side pushing right. the width of the cabinet from caster a to b is 24 inches.

Reference no: EM13324149

Questions Cloud

Explain the ksp of zinc oxalate at a given temperature : The Ksp of zinc oxalate (ZnC2O4) at a given temperature is 7.87 x 10-9. Calculate the molar solubility at this temperature. Use E notation
Aspects of international business and enterprise : Case Study On LEGAL ASPECTS OF INTERNATIONAL BUSINESS AND ENTERPRISE
What is the rate of entropy generation during the process : Steam expands in a turbine steadily at a rate of 25,000 kg/hr from 8 MPa and 450 oC to saturated vapor at 50 kPa. If the power generated by the turbine is 4 MW, what is the rate of entropy generation during this process
What are its marginal costs when producing 10 units : Suppose a firm has total cost function given by TC(Q)=10Q+70. What are its marginal costs when producing 10 units of output?
What is force p to move cabinet if caster a and b are locked : what is the force P to move the cabinet if a) caster A and B are locked b) B is locked A is free to move c) A is locked B is free to move p is applied from the left side pushing right. the width of the cabinet from caster a to b is 24 inches.
Calculate the protons initial kinetic energy : An infinitely long line of charge has linear charge density 5.00×10?12C/m. Calculate the protons initial kinetic energy
Explain how many moles of na+ ions : When 15 mL of a solution containing 1.2 M Na2S is diluted to 30mL, a dilute solution is formed. How many moles of Na+ ions are contained in 20 mL of the dilute solution
What is the charge on the ball bearing : A small glass bead has been charged to + 25nC . A tiny ball bearing 3.0cm above the bead feels a 1.8×10?2Ndownward electric force. What is the charge on the ball bearing
What would be the future value if the interest rate : What would be the future value if the interest rate is a simple interest rate and what would be the future value if the interest rate is a compound interest rate?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculating sand shear strength

Estimate the effective friction angle for the sand (assume c' = 0). Calculate the sand's shear strength (τf) on a horizontal plane at depths of the 20 ft and 50 ft.

  Free expansion of the rod

A rod of steel is 20 m long at a temperature of 200C. find the free expansion of the rod when the temperature is raised to 65 0 C. Find the temperature stress produced

  Determine when did the construction start in china

The Three Gorges Dam in China will be the world's biggest when complete. When did the construction start

  Find the swell and shrinkage and load and shrinkage factors

material (LCY) in 12 yard dump trucks, placing it, and compacting the weight of the soil is 3,750 lb/cu.yd. (30 pts.) (show your calculations) a) Find the Swell and Shrinkage b) Load and Shrinkage Factors

  Find what is the major head loss in a coarse concrete pipe

What is the major head loss in a coarse concrete pipe with a diamter of 1ft that is 100 ft long. Water flows at a rate of 20 ft^3/s (viscosity of water = 2.344x10^-5 lbfs/ft^2, density of water = 1.94 slugs/ft^3) 1inch = 25.4mm

  Determine the maximum service load

Determine the maximum service load W (kips) at the mid-height of the beam-column shown in the accompanying figure 2.1. Assume the member is hinged with respect to bending in both x and y directions at the top and bottom.

  Determine effective annual interest rate for a nominal rate

Determine the effective annual interest rate for a nominal rate of 8% per year, in which is compounded quarterly.

  What is elongation of the pipe as it just begins to come out

The segments of pipe and couplings used for drilling an oil well 15,000 ft deep are made of A-36 steel weighing 20 lb/ft. They have an outside diameter of 5.50 in. and an inside diameter of 4.75 in.

  Determine the downstream water level to produce the flowrate

The flow through an 8 ft. Parshall Flume is 129 cfs when Ha is 2.50 ft. Determine the downstream water level (Hb) that would produce this flowrate.

  Calculate the hydraulic conductivity k of the soil sample

The diameter of the sample and the standpipe were 9.8 cm and 0.75 cm, respectively. The water level in the standpipe was observed to fall from 60 cm to 45 cm in 12 minutes. Calculate: a. The hydraulic conductivity k of the soil sample .

  What are two types of variables that can be used for values

What are two types of variables that can be used for values that are less than 128, and describe what is the difference between the variables, how to declare them, and the memory allocated and the numerical range for both.

  What is the isentropic efficiency of the compressor

An adiabatic argon unit compresses argon at 200 kPa and 27C to 2.18 MPa. If the Argon leaves this compressor at 513C. What is the isentropic efficiency of the compressor

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd