Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Water with a static pressure of 1.96kN/M2 flows through an 800 mm diameter pipe. A pitot tube pressure gage in this pipe reads a pressure of 5.88 kN/M2. How do you determine the volume flow rate (Q) of the water? (Q = 1.40 M^3/sec, V=2.79 M/sec)
(a) At what angle did the player have to shoot the cue ball so that the eight ball entered the pocket at C? (b) In what direction did the cue ball move after the collision? (c) What percentage of its kinetic energy did the cue ball impart to the e..
A hazardous waste incinerator is to burn 200 Kg/h of PCB waste that is 30 % PCB and 70 % organic solvents. During testing phase, the concentration of PCB in the emission was recorded as 0.025 g/ m³
If the pipe is designed with a safety factor of two [i.e. the maximum stress in the field must be less than half the rated yield stress], what is the maximum depth that can be safely reached for drilling.
a thin walled circular tube and a solid circular bar of the same material are subjected to torsion. the tube and the bar have the same cross-sectional area and the same length.
A gas solution has the following composition, Oxygen = 35 g Nitrogen = 40 g Neon = 25 g Calculate mass fractions of all components. If you remove Neon, how much you have to remove to reduce mass fraction to 0.1
Air enters an air - standard Otto cycle with a pressure and temperature of 1 bar and 15 C respectively. The compression ratio is 9 and the bore and stroke of the cylinder are (10 cm, 12 cm).
Determine the runoff rate at t = 15.0 hr from a two storm system if the first storm drops 2.0-inches starting at t = 0, and the second storm drops 5.0-incheds starting at t = 12.0 hrs.
two solid rods AB and BC are welded together at B and loaded as shown. Knowing that d1=50mm and d2=30mm, find average normal stress at the midsection of rod AB and rod BC.
two pieces of steel are held together with six bolts. one end of the first piece of steel is welded to a beam and the
The in-situ bulk density of the sandy silt is 1.92 Mg/m^3 and its average water content is 13%. determine: a) the total volume of the sandy silt that must be removed from the borrow pit for construction of the embankment
The electric motor at A exerts a torque of 800N.m on the steel shaft from A to D. This has a torque of -300N.m at B and -500N.m at C. Design specificaions require that the diameter of the shaft be uniform from A to .
A level is set up midway between two wood stakes that are about 300 feet apart. The rod reading on Stake A is 9.65 ft and the reading on stake B is 4.23 ft. The level is then set up 6 feet in front of stake B.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd