Water is the working fluid in a rankine cycle

Assignment Help Mechanical Engineering
Reference no: EM13709145

Water is the working fluid in a Rankine cycle. Superheated vapor enters the turbine 10MPa, 480 celcius, and the condenser pressure is 6kPa. The turbine and pump have isentropic efficiencies of 80 and 70% respectively.

Determine for the cycle.

1. The rate of heat transfer to the working fluid passing through the steam generator, in kJ/kg of steam flowing

2. Thermal efficiency

3. The rate of heat transfer from the working fluid passing through the condenser to cooling water, in kJ/kg of steam flowing

Reference no: EM13709145

Questions Cloud

What is the magnitude of the horizontal net force : A 1980-kg car is traveling with a speed of 18.5 m/s. What is the magnitude of the horizontal net force that is required to bring the car to a halt in a distance of 43.8 m
Regenerative rankine cycle with one closed feedwater heater : Water is the working fluid in an ideal regenerative Rankine cycle with one closed feedwater heater. Superheated vapor enters the turbine at 10 MPa, 480 C and the condenser pressure is 6 kPa. Steam expands through the first stage turbine where some is..
Find how long will it take the tanker starting from rest : The motion of a very massive object can be minimally affected by what would seem to be a substantial force. how long will it take the tanker, starting from rest, to reach a typical cruising speed of 6.0 m/s
Determine the current through a flashlight filament : Determine the current through a 2.9-ohms flashlight filament when connected across two 1.5-V batteries in series (a potential difference of 3.0 V)
Water is the working fluid in a rankine cycle : Water is the working fluid in a Rankine cycle. Superheated vapor enters the turbine 10MPa, 480 celcius, and the condenser pressure is 6kPa. The turbine and pump have isentropic efficiencies of 80 and 70% respectively.
Work and exergy destroyed during this throttling process : Refrigerant-134a at 1 MPa and 100°C is throttled to a pressure of 0.8 MPa. Determine the reversible work and exergy destroyed during this throttling process. Assume the surroundings to be at 30°C.
What will the acceleration be if the force is halved : A constant force is applied to an object, causing the object to accelerate at 10 m/s2. What will the acceleration be if the force is halved
What is the total resistance of the circuit : Three 35-(Ohms) light bulbs and three 70-(Ohms) light bulbs are connected in parallel. What is the total resistance of the circuit
Find the angle between direction of its motion and x-axis : A butterfly moves with a speed of v = 12.0 m/s. the y-components of its velocity is 8.00m/s. Find the angle between the direction of its motion and the x-axis

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The flow rate is 2 kgs what is the rate at which energy is

a mixture of co2 containing 20 percent solid by mass 20 percent liquid and 60 percent vapor enters a pipe and emerges

  A plane can fly 305 mph in still air. if it can fly 185

A plane can fly 305 mph in still air. If it can fly 185 miles downwind in the same amount of time it can fly 120 miles upwind, find the velocity of the wind.

  The temperature of the inner surface of this pipe is 50 c

hot water flows through a pvc k.092 wmk pipe whose inner diameter is 2 cm and outer is 2.5 cm. the temperature of the

  How many photons-water interactions occur in one second in

a beam of 2-mev photons with intensity 108 cm-2s-1 irradiates a small sample of water. a how many photons-water

  Suppose 200 m3 of air which is considered an ideal gas is

suppose 2.00 m3 of air which is considered an ideal gas is initially at a pressure of 101.3 kpa and a temperature of

  Determine the power required for a 2500 kg car to climb a

determine the power required for a 2500 kg car to climb a 60 m long uphill road with a slope of 15ordm from the

  Value is equal to the specific heat ratio

A piston cylinder device initially contains 0.071m^3 of nitrogen gas at 140kPa and 135 degrees C. The nitrogen is now expanded to a pressure of 80kPa polytropically with a polytropic exponent whose value is equal to the specific heat ratio. Determine..

  Consider 60 kg of austenite containing 045 wt c cooled to

consider 6.0 kg of austenite containing 0.45 wt c cooled to below 727 degrees celcius 1341 degrees farenheit.a what is

  Two kw of work are being added to the portion of the plant

an overall balance around part of a plant involves three inlets and two outlets which only contain water. all streams

  Steam enters a well-insulated nozzle at 300lbfin2 600

steam enters a well-insulated nozzle at 300lbfin2 600 degrees f with a velocity of 100 fts and exits at 40 lbfin2 with

  Calculate the head loss in this length of pipe when the

a fluid flows in a certain length of cast iron pipe of 30 cm diameter with a mean velocity of 2.5 ms and head loss of

  Determine a the total rate of change in exergy of the steam

steam enters an adiabatic turbine at 6 mpa 600oc and 80 ms and leaves at 50 kpa 100oc and 140 ms. if the power output

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd