Water is pumped from a lower reservoir to a higher

Assignment Help Mechanical Engineering
Reference no: EM13624459

Water is pumped from a lower reservoir to a higher reservoir by a pump that provides 15 kW of shaft power. The free surface of the upper reservoir is 40 m higher than that of the lower reservoir. If the flow rate of water is measured to be 0.03 m3/s, determine mechanical power that is converted to thermal energy during this process due to frictional effects.

Reference no: EM13624459

Questions Cloud

Calculate the force p down the slope that will keep the : calculate the force p required to drag the block of mass 2 kg up the hill of angle 30 degrees at a constant velocity b
A system contains refrigerant r-134a with the specific : 1. a system contains water at 4.0 mpa and 275 degc. the phase of water isa liquid onlyb liquid-vapor mixturec vapor
The inner and outer surfaces of a 05 cm thick x 20 m x 20 m : the inner and outer surfaces of a 0.5 cm thick x 2.0 m x 2.0 m window glass in winter are 12degc and 4degc
A 217 kg particle has the xy coordinates -136 m 0792 m and : a 2.17 kg particle has the xy coordinates -1.36 m 0.792 m and a 2.34 kg particle has the xy coordinates 0.487 m -0.102
Water is pumped from a lower reservoir to a higher : water is pumped from a lower reservoir to a higher reservoir by a pump that provides 15 kw of shaft power. the free
The ball lands in a hoop which is 3m high from the ground : a ball is launched at the speed vo at the angle 60 degrees by a basketball player at the height of 2m from the ground.
The steam is then reheated at a constant pressure to 500c : steam enters the first stage turbine at 40 bar and 500c with a volumetric flow rate of 90 m3min. steam exits the
A microscope for viewing blood cells has an objective with : an anatomist is viewing heart muscle cells with a microscope that has two selectable objectives with refracting powers
If the bond interest is payable monthly and the bond : at 12 50000 bond is offered for sale at 45000. if the bond interest is payable monthly and the bond matures in 20 years

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  If methane burns in oxygen at an equivalence ratio phi15

an inventor has devised an atmospheric-pressure process to manufacture methanol. the inventor claims he has developed a

  If the mass flow rate of the cold stream is twice that of

a stream of refrigerant-134a at 1 mpa and 12 c is mixed with another stream at 1 mpa and 60 c. if the mass flow rate of

  Determine the heat exchange between the first to the second

two refrigerators are arranged in series. one of them receives 300 kjcycle from a reservoir at 300 k. the heat

  Determine the strains in thick walled cylindrical vessel

Cylinder problem, Determine the strains in thick walled cylindrical vessel with inside diameter 1000 mm and outside diameter of 1400 mm

  What exactly is shaft power for a wind turbine what would

jon has decided to install a wind turbine at the top of the ridge. assume the wind velocity is hitting the turbine at a

  Find positive limit load and positive ultimate limit load

conditionsw10000 lbs 100 ft2clmax 1.5aircraft certified aerobatic category -3 6 g1. find stall speed keas at 1 g 0

  Determine a t2 in 0r and b the rate of exergy destruction

air at t11300 0r p116 lbfin2 enters a counterflow heat exchanger operating at steady state and exits at p214.7 lbfin2.

  Calculate the rate of kinetic energy of air exiting the

an electric motor powered blower is used to accelerate quiescent air 0 ms to a velocity of 10 ms at a volume flow rate

  Determine the resultant internal loadings

the beam ab is pin supported at a and supported by a cable BC. determine the resultant internal loadings acting on the cross section at points d and e.

  If the efficiency of this engine is 58 of the efficiency

in one cycle a heat engine absorbs 480 j from a high-temperature reservoir and expels 300 j to a low-temperature

  An egg can be approximated as a 55 cm diameter sphere with

an egg can be approximated as a 5.5 cm diameter sphere with rho 1020 kgm3 cp 3.32 kjkgc. determine the heat transfer

  What will be the final temperature in the tank

what will be the final temperature in the tank? how much work will be accomplished over the course of the entire process?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd