A system contains refrigerant r-134a with the specific

Assignment Help Mechanical Engineering
Reference no: EM13624462

(1). A system contains water at 4.0 MPa and 275 °C. The phase of water is:

(A) Liquid only

(B) Liquid-vapor mixture

(C) Vapor only

(D) Solid only

(E) None of the above

(2). A system contains water at 4.0 MPa and 245 °C. The phase of water:

(A) Liquid only

(B) Liquid-vapor mixture

(C) Vapor only

(D) Solid only

(E) None of the above

(3). A system contains Refrigerant R-134a with the specific volume of 0.02 m^3/kg at 0.5 MPa. The phase of R-134a is:

(A) Liquid only

(B) Liquid-vapor mixture

(C) Vapor only

(D) Solid only

(E) None of the above

(4). At a pressure of 4 MPa, the temperature at which liquid water boils is:

(A) 29.0 °C

(B) 100.0 °C

(C) 143.6 °C

(D) 250.4 °C

(E) None of the above

(5). Which one is valid among the following statements about the quality, a property of pure substance?

(A) The higher the quality, the lower the percentage of vapor.

(B) The higher the quality, the better the pure substance.

(C) The quality of superheated vapor is greater than 1.

(D) The value of the quality (x) always is 0 ? x ? 1.

(E) Compressed liquid always has a quality.2

(6). Airis contained in a room with a dimension of 4 m × 5 m × 3 m at 100 kPa and 25 degree C, the mass of air in this room is closest to

(A) 35.08 kg

(B) 70.15 kg

(C) 140.30 kg

(D) 836.24 kg

(E) None of the above

(7). Which one is valid among the following statements about an ideal gas?

(A) The vapor in a liquid-vapor mixture of water is always considered as an ideal gas.

(B) An ideal gas is an imaginary substance that has high intermolecular forces and each gas molecule occupies a relative large volume.

(C) An ideal gas is an imaginary substance that is close to the real gas with very high density.

(D) The Pv=RT equation closely approximates the P-v-T behavior of the real gases at high pressure and low temperature.

(E) The Pv=RT equation closely approximates the P-v-T behavior of the low-density real gases at low pressure and high temperature.

(8). A system contains Refrigerant R-134a with the specific enthalpy of 275 kJ/kg at 600 kPa. The phase of R-134a is:

(A) Liquid only

(B) Liquid-vapor mixture

(C) Vapor only

(D) Solid only

(E) None of the above

Reference no: EM13624462

Questions Cloud

Why is it popular for advertisments to always state a : why is it popular for advertisments to always state a confidence interval? give an example of where you have seen
It has been suggested these warm and cold waters could be : the surface waters of tropical oceans are at a temperature of 28c while water at a depth of 1200 m is at 3c. it has
A thin metal plate is insulated on the back and exposed to : a thin metal plate is insulated on the back and exposed to solar radiation on the front surface. the exposed surface of
Calculate the force p down the slope that will keep the : calculate the force p required to drag the block of mass 2 kg up the hill of angle 30 degrees at a constant velocity b
A system contains refrigerant r-134a with the specific : 1. a system contains water at 4.0 mpa and 275 degc. the phase of water isa liquid onlyb liquid-vapor mixturec vapor
The inner and outer surfaces of a 05 cm thick x 20 m x 20 m : the inner and outer surfaces of a 0.5 cm thick x 2.0 m x 2.0 m window glass in winter are 12degc and 4degc
A 217 kg particle has the xy coordinates -136 m 0792 m and : a 2.17 kg particle has the xy coordinates -1.36 m 0.792 m and a 2.34 kg particle has the xy coordinates 0.487 m -0.102
Water is pumped from a lower reservoir to a higher : water is pumped from a lower reservoir to a higher reservoir by a pump that provides 15 kw of shaft power. the free
The ball lands in a hoop which is 3m high from the ground : a ball is launched at the speed vo at the angle 60 degrees by a basketball player at the height of 2m from the ground.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Develop a system of equations and solution

Depron is a polystyrene foam, popular as a material for the manufacture of fast food trays and packaging. It is much lighter than balsa wood and can be cut with a sharp blade, sawn with a fine.

  Air initially at a dry-bulb temperature of 45 degrees c and

air initially at a dry-bulb temperature of 45 degrees c and hr 10 is adiabatically humidified to hr 60.a determine

  He tube has ans inside diameter 30mm and a bulk t of 20 c

water flows in a long electrically heated tube with q constant constant heat flux. the velocity and temperature

  Nitrogen initially occupying 35 ft3 at 87 psia 480degf

nitrogen initially occupying 3.5 ft3 at 87 psia 480degf undergoes in internally reversible expansion during which pv1.2

  Determine the outlet temperature and pressure drop of air

Air at 200 kPa enters a 2-m-Iong, thin-walled tube of 25-mm diameter at 150°C and 6 m/s Steam at 20 bars condenses on the outer surface.

  Meaning of the term mechatronics

Briefly describe the meaning of the term mechatronics both in terms of the 'systems approach' and the technology involved.

  Determine the inner diameter of the bones cross section at

a stress gauge located at c on the surface of the bone ab indicates that the average normal stress in the bone is 3.80

  Determine the pressure on the bottom surface of the fluid

a 6.5m tall tank has a rectangular cross?section and is filled with water to a depth of 3.5m. assuming the pressure on

  What would be the indicated distance

A steel tape is used to measure a distance of 20 m at a 10 0C. Assuming that the tape will measure the true distance when the temperature is 20 0C. What would be the indicated distance at 10 0C? What would be the indicated distance at 400C?

  Determine the rate of entropy generation of the steam

steam enters an adiabatic turbine at 8 mpa and 520 degc with a volumetric flow rate of 0.8 m3s and exits at 30 kpa. the

  The gage fluid in the manometer has a specific weight of

a flowrate measuring device is installed in a horizontal pipe through which water is flowing. a u-tube manometer is

  The load bearing piston in a certain hydraulic has an area

the load bearing piston in a certain hydraulic has an area 50 times as large as the input piston. if the larger piston

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd