Water is in a closed rigid container with a volume

Assignment Help Mechanical Engineering
Reference no: EM13708179

Five kg of water is in a closed rigid container with a volume of 0.3935 m3 and a pressure of 5.0 MPa. Draw and label the states and process on a P-v diagram and determine the amount of heat removed and work done when the pressure is reduced to 1.5 MPa.

Reference no: EM13708179

Previous Q& A

  Device undergoes a constant temperature process

Water as a saturated vapor at 600 °F is contained in a piston-cylinder device that has an initial volume of 30 ft3. The device undergoes a constant temperature process, until the water reaches the saturated liquid condition. Draw and label the state..

  Nitrogen in a piston-cylinder assembly

Nitrogen in a piston-cylinder assembly undergoes a polytropic expansion process. Initially, nitrogen is at 125 C and 144 kPa. Then it is expanded to a state of 102 kPa and 90 C. determine the heat transfer and work for the process considering no chan..

  Calculate the area of the hole in the tube

A slow leak develops in an inner tube (volume, 0.5 ft3, temperature, 600F), wherein it takes 4 hours for the pressure to decrease from 30 to 25 psig. The mass flow rate of air per second under the conditions is given by 0.68pA/(RT)0.5, where the unit..

  Strength and ductility of a crystalline material

Explain how you would expect the strength and ductility of a crystalline material to change as the ASTM Grain size number change from 14 to 3.

  Evaluate the concentration of vacancies in copper

Evaluate the concentration of vacancies in copper at 650C temperature. What temperature will be needed to heat treat copper such that the concentration of vacancies produced will be 1000 times more than the equilibrium concentration of vacancies at s..

  Air at standard temperature and pressure flows

Air at standard temperature and pressure flows through a horizontal galvanized iron pipe at a rate of 4.0 ft3/s. The pressure drop must not exceed 0.75 psi per 100 ft of pipe (and naturally we want to design the most economic pipe). What diameter sho..

  What is the composition-in weight percent and atom percent

What is the composition, in weight percent and atom percent, of an alloy that contains 105.0 kg iron, 20.3 kg of aluminium, and 2.0 kg of copper?

  Insulated piston-cylinder assembly containing a fluid

An insulated piston-cylinder assembly containing a fluid has a stirring device operated externally. The piston is frictionless, and the force holding it against the fluid is due to standard atmospheric pressure and a coil spring. The spring constant ..

  Piston cylinder device initially contains steam

A piston cylinder device initially contains 0.15-kg steam at 3.5 MPa, superheated by 5 C. Now the steam loses heat to the surroundings and the piston moves down, hitting a set of stops at which point the cylinder contains saturated liquid water. the ..

  Find necessary requirement specifications of the material

If have to do a material selection case study for a rice cooker outer body where can I find the necessary requirement specifications of the material?

Reviews

Write a Review

 

Similar Q& A

  Taking the properties of the egg to be rho 1020 kgm3 and

an ordinary egg can be approximated as a 5.5-cm-diameter sphere. the egg is initially at a uniform temperature of 8c

  What force would be required to start a 250lb crate

what force would be required to start a 250lb crate sliding across a cement floor which has a coefficient of static

  The system contains a sharp-edged

a liquid at 10 c kinematic viscosity of 1.30710-6 m2s is to flow from a roof-top reservoir to a tanker truck through a

  Calculate the maximum mass flow rate at the inlet condition

a refrigerant 134a at 140 kpa and -10 degree celcius is compressed by an adiabatic 16kw compressor to an exit state of

  Determine vertical distance between two consecutive drops

Water drips at the rate of 5 drops per second from a leaking tap. Determine the vertical distance between two consecutive drops after the lower drop has attained a velocity of 3 m/s.

  Calculate the exact integration result using matlab

Calculate the exact integration result using Matlab symbolic tools and calculate the errors in calculating work done

  Determine the effective spring constant of the following

determine the effective spring constant of the following sandwich of materials under compressive load. all are

  Calculate the resulting strain

A specimen of Aluminium having a rectangular cross section 10 mm x 12.7 mm is pulled in tension with 25,500 N force, producing only elastic deformation. Calculate the resulting strain.

  Calculate the entropy generated in the process in kjk use

a well-insulated chamber is divided in two parts my a thin membrane. the left side with a volume of 2000 cm3 is filled

  A pitot-static tube is used to measure the airspeed of an

a pitot-static tube is used to measure the airspeed of an airplane. the pitot tube is connected to a pressure sensing

  The convective heat transfer coefficient between the outer

it is 30degf outside. the temperature of the outside surface of a building is 33degf. the thickness of the building

  The mole percents of the compounds are as follows 78 n2 21

air in the atmosphere is composed of primarily nitrogen oxygen and argon. the mole percents of the compounds are as

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd