Under what condition will both the soil have the same weight

Assignment Help Civil Engineering
Reference no: EM13307383

Given Specific Gravity for Soil A is 2.00 and Specific Gravity for Soil B is 4.00, under what condition (Volume of Soil A and Soil B) will both the soil have the same weight?

Reference no: EM13307383

Questions Cloud

Determine whether implementing a no smoking rule significant : 2. The staff at a local psychiatric facility wants to determine whether implementing a No Smoking rule significantly decreases the length of stay of inpatients.
What is the work function of this surface : The photoelectric effect experiment is often carried out by using a mercury light source to illuminate a particular surface. What is the work function of this surface
Find the correction for the calibration of the measuring tap : Find the correction for the calibration of the measuring tape using its formula. During the calibration of the measuring tape on comparator of 100.000m the length of the tape turned out to be of 99.993m
How far is the harvest mouse from the leaf : a harvest mouse can detect sounds as quiet as -10 dB. suppose you are sitting in a field on a very quiet day while a harvest mouse sits nearby at the entrence to its nest, How far is the harvest mouse from the leaf
Under what condition will both the soil have the same weight : Given Specific Gravity for Soil A is 2.00 and Specific Gravity for Soil B is 4.00, under what condition (Volume of Soil A and Soil B) will both the soil have the same weight
What is the wavelength of light inside the diamond : A ray of 600 nm light traveling through air is incident on a slab of diamond (n=2.41) at an angle of theta=60 to the normal. What is the wavelength of light inside the diamond
What is the frequency of the cars horn : A man driving a car toward a large vertical wall sounds his horn. The car is traveling at 81 km/h. What is the frequency of the car's horn
Explain product characteristics and deliverables : Document the requirements based on the information provided and assumptions that you have made, including a requirements traceability matrix. Describe product characteristics and deliverables.
Explain the difference between mechanical and organic : Explain the difference between mechanical and organic solidarity. How do deviants hold us together in both types of society?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Develop the relation between bulk unit weight

develop the relation between bulk unit weight, specific gravity, void ratio and weight of water.

  Problem of coefficient of static friction

The machine part ABC is supported by a frictionless hinge at B and a wedge at C. Knowing that the coefficient of static friction is 0.20 at both surfaces of the wedge, determine:

  Specify the amount of convective acceleration

shaped nozzle such that the velocity along the center line of the flow increased from 1.5 m / s to 15 m / s at a distance of 37.5 m. specify the amount of convective acceleration at the beginning and end of the range.

  Depth of aggregate of wheel load over soil

A 2000-lb wheel load is to be supported by aggregate over soil with a maximum bearing pressure of 1000 lb/sqft. What depth of aggregate is needed if the angle theta is 40 degrees?

  Determine the couple m required to hold the system

the pin at B is attached to member ABC and can slide freely along the slot cut in the fixed plate. Neglecting the effect of friction, determine the couple M required to hold the system in equilibrium when.

  Is the correct difference in elevation between a and b

A level is set up midway between two wood stakes that are about 300 feet apart. The rod reading on Stake A is 9.65 ft and the reading on stake B is 4.23 ft. The level is then set up 6 feet in front of stake B.

  How to draw bending moment diagram

How to draw bending moment diagram for this shape and the value of the moment in critical sections assume that the distributed load (w) KN/M and the concentrated load

  Determine the flow rate of the oil

Oil of a specific gravity of 0.75 is flowing through a 6-in pipe under a pressure of 15 psi. If the total energy relative to the datumplate is 8.0 ft below the center of the pipe is 58.6 ft, determine the flow rate of the oil.

  Determine how high was the buckle into an isosceles triangle

They completed the installation when the temperature was 20 degrees Celsius. When the temperature rose to 25 degrees Celsius, the rail buckled into an isosceles triangle because they had not left an expansion gap.

  Calculate the elastic recovery

A 10-mm diameter bar of 1040 carbon steel is subjected to a tensile load of 50,000 N, taking it beyond its yield point. Calculate the elastic recovery (or strain) that would occur upon removal of the tensile load.

  Determine the length of time

The 20-lb cart B is supported on rollers of negligible size. If a 10-lb suitcase A is thrown horizontally on it at 10 ft/s, determine the length of time that A slides relative to B, and the final velocity of A and B. The coefficient of kinetic fri..

  Maximum deflection of the beam

Determine the deflection of the right end of the pointer and the maximum deflection of the beam.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd