User Account

All Pages

The method of sections

Assignment Help Civil Engineering
Reference no: EM13865697

For the truss sketched below:

1. Determine, by THE METHOD OF SECTIONS, the forces in members AC, BC and BD.

2. Determine, by THE METHOD OF JOINTS, the forces in members FH, HI, GI, and GH.

2443_METHOD OF SECTIONS.jpg

Reference no: EM13865697

Questions Cloud

Step response of the position servo system : Use MATLAB to plot the step response of the position servo system for values of the gain K=0.5, 1.0, 2.0 below is possible data code
Explain the culture of law enforcement : Compose a 1-2 page Essay discussing how one's disposition and manner contributes to building a rapport with colleagues. Be sure to address the prompts below: Describe the culture of law enforcement. How does effective, appropriate communication and..
Conducting an organizational assessment : Conducting an organizational assessment
Tory of the sadhu from your perspective? : McCoy concludes that the lesson of the sadhu is that in a complex corporate situation the individual requires and deserves the support of the group When people cannot find such support in their organizations, they don’t know how to act What support i..
The method of sections : 1. Determine, by THE METHOD OF SECTIONS, the forces in members AC, BC and BD. 2. Determine, by THE METHOD OF JOINTS, the forces in members FH, HI, GI, and GH.
Calculate the npv of the homenet project : Calculate the NPV of the HomeNet project assuming a cost of capital of 10%, 12% and 14% and NPV of the FCF's of the HomeNet project assuming a cost of capital of 10% is $__.
Is it fair to excuse the criminal responsibility of someone : Is it fair to excuse the criminal responsibility of someone who acted under an irresistible impulse
Explain how the debt capacity of the governmental entity : Explain how the debt capacity of the governmental entity is determined
Indicate whether operating investing activities are afected : Motif Furniture is an Austin- based furniture company. For each of the following first- quarter transactions, indicate whether operating (O), investing (I), or financing activities (F) are affected and whether the effect is a cash inflow (1) or outfl..

Reviews

Write a Review

Civil Engineering Questions & Answers

  How do you determine the proportions of aggregates

Plotted property surveys usually show the direction of property lines as bearings and not azimuths. True or false give reason to answer?

  What is the maximum weight that can be suspended on poll

What is the maximum weight that can be suspended on a 16 Kg poll, 3/5 from the end. The maximum tension of the 30 degree guy-wire is 1500 N. Find the horizontal and vertical forces exerted on the poll by the hinge.

  Determine what is the force in the wire and beam

The 5-m long cantilever beam using a W410 x 67 standard wide flange section has a distributed load of 1200 N/m placed on it. It is also supported by a cable at B, of length 2 m with a 7 mm2 cross sectional area. What is the force in the wire

  Find length and width of square basin for virus disinfection

Find the length and width of a square basin for virus disinfection of a flow of 6 MGD. You may assume a depth of 5 ft, a C•t product of 10 (mg/L) •min for 1.5-log removal, and a target free chlorine residual of 0.6 mg/L.

  Determine the support reactions and the force in each member

The space truss shown is supported by a ball-and-socket joint at D and by short links at A and C. Determine the support reactions and the force in each member of the space truss.

  What amount of depreciation will you claim for each calender

What amount of depreciation will you claim for each calenderyear during the period 1972-1975?

  A constant head permeability test was conducted on a clean

a constant head permeability test was conducted on a clean sand sample. the diameter and length of the test specimen

  What is the undrained shear strenght-psf of the clay

an unconfined compression test was conducted on a cylindrical clay specimen with the following properties: Peak load at failure = 4.5lb, diameter of sample = 1.2 in.

  What diameter is required if the concrete pipe is to carry

A ciricular sewer is laid on a slope of 0.5%. What diameter is required if the concrete pipe is to carry 25 cfs If the desired design mean suction velocity is between 3 and 7 ft/s, is the design acceptable

  Determine the volumetric flow rate in each 15-cm duct

Air enters an electrical furnace at 20oC, 100 kPa, with a volumetric flow rate of 30 m3/min. The furnace delivers air at 40oC to a duct system with three branches consisting of two 15-cm-diameter ducts and a 30-cm-diameter duct.

  What is the minimum detention time in hours to settle out

The settling velocity of alum floc in a sedimentation basin is approximately 0.0014 fps. Calculate the equivalent overflow rate in gpd/ft2. What is the minimum detention time in hours to settle out the alum floc in an ideal basin with a depth of 10 f..

  Determine the maximum temperature in the tank

Determine the maximum temperature in the tank. Take the thermal conductivity of the wastes as 2.0 W/mK.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd