Stormwater monitoring

Assignment Help Civil Engineering
Reference no: EM13133284

1. An analysis of dredged sediments from a stormwater retention basin revealed a high concentration (in mg/kg) of the heavy metals Fe, Al, Zn, Cu, Pb, Cr, Ni and Cd. The retention basin receives runoff from a watershed that recently has seen an increase in industrial activity. A study is to be conducted with the following objectives: (i) quantify the upstream generation of heavy metals and (ii) assess the settleability of heavy metals through an investigation of the partitioning of heavy metals into different size fractions. Develop a monitoring programme to study storm runoff from a sub-catchment within the watershed having an area of 80 ha of which 85% is industrial and 10% road. The sampling point is a large U-drain 2m in depth and 3 m wide.

Your monitoring programme should include the following considerations:

(i) Equipment selection - provide details of the equipment you would use and give reasons for your choice.

(ii) Suggest a possible sampling plan for the hydrograph shown (Q is in m3 /min).

1904_Laboratory analysis methodology.png

(iii) Provide details of the sampling protocol to be adopted (sample bottles, sample preservation, field preservation, blanks, ...)

(iv) Procedure for size fractionating the samples.

(v) Laboratory analysis methodology to be used. Give details on the standard methods, instrument and detection limits. Standard methods for heavy metals analysis exist, you should look them up. You should choose a method that best suits the concentrations that you are expecting.

(vi) Of the heavy metals listed, which would you expect is least likely to be anthropogenic in origin? Why?

Verified Expert

Reference no: EM13133284

Questions Cloud

Vector spaces and scalar multiplication : Let V be the space of all functions from R to R. It was stated in the discussion session that this is a vector space over R. Prove axioms (VS1)=For all x,y, x+y=y+x (commutativity of addition),
Determine range of values containing of population : Determine the range of values containing 50% of the population of x. From a large sampling (N>5000), we find that x has a mean value of 5.2 units and a standard deviation of 1.0 units.
What is the percent yield : N2 + 3H2 -> 2NH3 . 28.0 grams of N2 and 5.04 grams of H2 are reacted, producing 17.8 grams of NH3. What is the percent yield?
Vitamin b6 is needed in the metabolism of amino acids : Vitamin b6 is needed in the metabolism of amino acids. When it binds to an enzyme it forms a complex with the e-amino group of lysine, which is a primary amine.
Stormwater monitoring : Laboratory analysis methodology to be used. Give details on the standard methods, instrument and detection limits. Standard methods for heavy metals analysis exist
Expenses are not usually separated into variable and fixed : When finished goods inventory decreases during a period, a manufacturing company's absorption costing net operating income for that period will usually be greater than its variable costing net operating income.
Compute the mix and quantity variances : Renee's Rings manufactures college rings. Two models are produced: The Spirit model with a budgeted price of $660 and a standard variable cost of $360.
Vertex of a parabola-maximum height : An arrow is accidentally shot into the air. The formula y = - 14x2 + 56x + 18 models the arrow's height above the ground, y, in feet, x seconds after it was released.
Probability that container is a nonconforming container : If a filled container of juice is selected at random, what is the probability that is is a nonconforming container and what is the probability that is was filled in machine II?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determining maximum acceleration and maximum velocity

The posItIon of a particle along a straight line is given by s = (t 3 - 9t 2 + 1St) ft, where t is in seconds. Determine its maximum acceleration and maximum velocity during the time interval 0 :5: t :5: 10 s.

  Density specifications under average operating conditions

Calculate the compacted cubic yards per hour if a compactor with a 5-ft drum width travels at 3 mph over a 10-in. lift of aggregate base course with 4 passes required to meet density specifications under average operating conditions.

  Design a cantilever

Need to design a cantilever retaining wall 8m high, saturated unit weight is 16kn/m 3 , surcharge is 7kn/m 2 , load above wall supported on wall stem

  Elevation of the curve turning point

Set up a table showing curve elevations at the PVC, at the PVT, and at the half-station points along the curve. Compute the station and elevation of the curve turning point.

  A sewage treatment works stw

A sewage treatment works (STW) with 4 single-stage trickling filters has become organically overloaded due to the discharge of a biodegradable industrial effluent to the STW. This is causing effluent to pond on the surface of the filters.

  Enforcement team investigating possible dumping of arsenic

Suppose you are a member of an EPA enforcement team investigating the possible dumping of arsenic into Arbor Lake. You take water samples from the middle of the lake and find that the concentration is 90.0 ppb.

  Arrival of vehicles according to a poisson process

At a specified point on a highway, vehicles are known to arrive according to a Poisson process. Vehicles are counted in 20-second intervals, and vehicle counts are taken in 120 of these time intervals.

  Calculate equivalent pipe size and flow in the pipe

The first pipe of 0.4-m diameter is 500 m long, the second pipe 600 m long, size 0.3 m, and the last pipe is 500 m long of diameter 0.2 m. If the elevation difference between two reservoirs is 30 m, calculate equivalent pipe size and flow in the p..

  Total vehicle delay in the cycle with queueing diagram

If the queue clears exactly at the end of the effective green D/D/1 queuing applies, determine the total vehicle delay in the cycle (in veh-sec) .

  Determine moles of helium in cylinder

As the piston is compressed, the pressure also increases by 2000000 Pa. If there is 4 times as many atoms of nitrogen as helium, how many moles of helium are in the cylinder?

  Determining axial load of a dense sand

A dense sand has an effective friction angle of 43 and c'=0. A dry, 2.8-inch diameter sample is tested in drained triaxial shear with a confining pressure of 2500 psf. What axial load, P (in pounds), will be required to fail the sample?

  Calculate the deflection of the beam

Also calculate the deflection of the beam to check that it complies with the design limit of L/200. Only variable actions are required for deflection check.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd