State the appropriate null and alternate hypotheses

Assignment Help Civil Engineering
Reference no: EM13318279

The installation of a radon abatement device is recommended in any home where the mean radon concentration is 4.0 picocuries per liter (pCi/L) or more, because it is thought that longterm exposure to sufficiently high doses of radon can increase the risk of cancer. Seventy-five measurements are made in a particular home. The mean concentration was 3.72 pCi/L and the standard deviation was 1.93 pCi/L.

a. The home inspector who performed the test says that since the mean measurement is less than 4.0, radon abatement is not necessary. Explain why this reasoning is incorrect.

b. Because of health concerns, radon abatement is recommended whenever it is plausible that the mean radon concentration may be 4.0 pCi/L or more. State the appropriate null and alternate hypotheses for determining whether radon abatement is appropriate.

c. Compute the P- value. Would you recommend radon abatement? Explain.

Reference no: EM13318279

Questions Cloud

What is the amplitude of the magnetic field of this wave : The intensity of an electromagnetic wave is 8 x 10^7 W/m^2. What is the amplitude of the magnetic field of this wave
What is contact time-min required to achieve deactivation : What is the contact time (min) required to achieve a log-3 deactivation of Giardia in water of 10 °C temperature, at pH 7, if the chlorine concentration is 2.2 mg/L
Find the velocities of the two objects after the collision : Let the mass of object 1 be m and the mass of object 2 be 3m. what are the velocities of the two objects after the collision
Explain the minimum concentration of mg2+ required : What is the minimum concentration of Mg2+ required to begin precipitating Mg(OH)2(s) in a solution of pH 10.82? For Mg(OH)2
State the appropriate null and alternate hypotheses : The installation of a radon abatement device is recommended in any home where the mean radon concentration is 4.0 picocuries per liter (pCi/L) or more, because it is thought that longterm exposure to sufficiently high doses of radon can increase t..
How many grams of dry nh4cl need to be added to ammonia : How many grams of dry NH4Cl need to be added to 2.50 L of a 0.500 M solution of ammonia, NH3, to prepare a buffer solution that has a pH of 8.74? Kb for ammonia is 1.8*10^-5.
Explain the minimum do of the pond drop to as the waste : A tanker carrying 800 kg of BOD waste accidently overturns and spills into a pond with a volume of 100,000,000 L. Assume the pond is completely mixed and has an initial DO of 6.4 mg/L and a temperature of 20°C
Determine the dimensions of the best cross section : Water is to be transported at a rate of 60,000 gallons/min in uniform flow in an open channel whose surface are lined with clay tile. The bottom slope is 0.0014. Determine the dimensions of the best cross section
Determine smallest horizontal force p required to move wedge : Determine the smallest horizontal force P required to move the wedge to the right. The coefficient of static friction at all contacting surfaces is mu_s = 0.6. Set theta = 14^\circ and F = 490N . Neglect the weight of the wedge.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the work done by gases with constant specific heat

The gases are expanded to 140 kPa with a reversible adiabatic process. Calculate the work done by the gases, assuming they can be approximated by air with constant specific heats.

  Determine the saturated hydraulic conductivity of the layer

This uniformly reduces 4X10-4 cm / s to a depth of 22 meters. If the water level is about 3 feet below the surface, determine the saturated hydraulic conductivity of the layer.

  Draw the bending moment diagram and shear force diagram

consuder a simply suppurted beam of length 10 feet with concentrated load of 1000lb at the centre of the beam. Draw the bending moment diagram and shear force diagram

  What is the pressure on the soil if theta is 45 degrees

A pipe is to be installed under the ground on a bed of aggregate 6 in. thick. The entire weight on the aggregate from pipe and soil above the pipe is 1800 lbs. per linear foot of pipe. What is the pressure on the soil if theta is 45 degrees

  What is the height above ground level in the afternoon

Natural gas is stored in very large vessels consisting of a floating tank and a liquid seal. The pressure in the tank is constant because the weight of the floating tank is constant. In the morning, the temperature of the natural gas is 300 K.

  What is the volume and base diameter of the resulting pile

Soil falls from a conveyor belt into a cone shaped pile at a rate of 1000lb/min. The bulk density of the soil is 110lb/ft^3. The height of the pile is equal to the base diameter.

  Design a needle-punched nonwoven geotextile for use

The thickness of geonet is 0.2 inch (5 mm). Assume the maximum inflow rate is 0.14 inch/hour. The liquid head over the geomembrane liner is 2 inches. The index properties of the soil placed over the geotextile are as follows

  What is necessary heat transfer per unit mass in kj per kg

Air (m=28.97kg/kmol) is uniformly heated at steady state as it flows through a cylindrical constant area duct. It enters the channel uniformly at 2.5atm, 300K and 80m/s and exits at 1.5atm.

  How much larger should street name be in order to be legible

street nam sizes on the signs at a certain location can be discerned by a person with 20/40 vision from a distance of 300 ft. how much larger should the street names be in order to be legible to a person with 20/50 vision from a distnace of 450 ..

  How to determine discharge from the mouth piece

Discharge from an orifice of 75mm diameter is 0.02 m^3/s under a constant head of 3 m. An external mouthpiece of the same diameter is installed that raises the coefficient of contraction from 0.63 to 1.0.

  Determine level of service at which the highway will operate

A 3-mi section of a two-lane, two-way highway located in a mountainous terrain is to be designed to carry a peak hour volume of 750 vehicles. Using the operational level of analysis

  Determine the pressure at a closed valve attached to tank

In a certain chemical plant, a closed tank contains ethyl alcohol to a depth of 50 ft. Air at a pressure of 25 psi fills the gap at the top of the tank. Determine the pressure at a closed valve attached to the tank 10 ft above its bottom.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd