Same surface concentration of carbon applied

Assignment Help Mechanical Engineering

Reference no: EM13709636

You are considering two different diffusion processes involving Carbon into FCC iron. The first process is carried out at 900 oC for 3 hours and produces a carbon concentration of 0.20 wt% at a depth of 2 mm. At what depth would this concentration occur if a similar process at 1100^oC for 2 hours was performed (on the same type of steel with the same surface concentration of carbon applied)?

Reference no: EM13709636

Questions Cloud

Oxygen flow being expelled from the cylinder generate : A high-pressure oxygen cylinder, typically found in most welding shops, accidentally is knocked over and the valve on top of the cylinder breaks off. This creates a hole with a radius of 14 mm. Prior to the accident, the internal pressure of the oxyg..

What is the mass flow rate through wind tunnel : An open wind tunnel with altitude of 1000m has Pin=89,876Pa, Ain=4m^2, T=281.7K, Vin=30m/s and the test section Aout=0.5m^2, Vtest=(X)m/s. R=287J/(Kg*K), density=1.1117kg/m^3 and dynamic viscosity=1.076E-05kg/m-s

Container is divided into two regions by a removable wall : A rigid wall, insulated container is divided into two regions by a removable wall. One region contains 0.1 lbm of CO at 100F, while the other region contains 0.2 lbm of CO at 150?F. A stirrer is inserted into the container and when the wall between t..

Compute the average density of a solid solution : Compute the average density of a solid solution which contains 10 kg of gold, Ag, and 90 kg of silver, Au. The density of pure gold is 19.32 g/cm3 and the density of pure silver is 10.49 g/cm3

Same surface concentration of carbon applied : You are considering two different diffusion processes involving Carbon into FCC iron. The first process is carried out at 900 oC for 3 hours and produces a carbon concentration of 0.20 wt% at a depth of 2 mm. At what depth would this concentration oc..

The airplane travels before hitting the slope : A paper airplane is thrown up a hill with slope theta = 16.26 deg during a rainstorm. The airplane has an initial speed of 10 ft/s and is fired at an angle of phi=32.52 deg from the horizontal. Rain accumulation on the wings results in a vertical acc..

Find the input-output equation using the p-operator : Find the input/output equation using the P-operator approach when x2 is the output.

Tensile strength of the steel before and after cold-working : Using the data shown in Callister Figure 7.19, draw an approximate stress-strain curve for the 1040 steel at 0% cold work and at 30% cold work, clearly indicating the yield strength, ductility, and tensile strength of the steel before and after cold-..

Ductility compare for pure iron vs. the alloy steel : Using the data shown in Figures 6.14 (at 25oC) and 6.21, combine both curves onto one plot, being careful to correctly plot the modulus, yield strength, tensile (ultimate) strength, and ductility. Discuss how the modulus, yield strength, and ductilit..

User Account

All Pages