Question 1 the variation of 2sdt q with q of a basin is

Assignment Help Civil Engineering
Reference no: EM13372971

Question 1. The variation of (2S/dt + Q) with Q, of a basin is given by Q = 0.0015(2S/dt + Q)2  + 0.195(2S/dt + Q) - 0.3833. The outlet structure is a weir with crest length L = 1.5 m set at elevation Y = 30.5 m and discharge coefficient kw = 0.4. The storage of the basin increases linearly from 0 at Y = 30.5 m to 16,980 m3 at Y = 35 m and the initial water level is at Y = 30.9 m.

(i) Determine the peak outflow rate when the following inflow hydrograph is routed through this basin.

372_Determine the peak outflow rate.png

(ii) What is the design storage and water surface elevation at the peak outflow rate.

Question 2. Obtain the stage-discharge relationship for a dual outlet detention basin. The bottom outlet is a pipe culvert of diameter 0.5 m and discharge given by ?? = ????????√2gh?? where ko = 0.6, Ao is the area, hc is the depth of water above the pipe centre line and the pipe is situated at the bottom of the basin with its invert at Stage = 0 m. The second outlet consists of a spillway with discharge ?? = ??????h??1.5 √2g where L = 2m, kw = 0.45, hs is the depth of water above the spill way crest which is located at Stage = 2m. Provide a hydraulic design of the outlet structure showing your answer in a table for stage ranging from 0 m to 3 m in 0.5 m increments.

Question 3. Stormwater runoff from a 4.05 ha development is to be routed to a retention basin. The basin design is 7.6 m by 15.2 m and has an average depth of 1.2 m. Estimate the long-term average reduction (EPA, 1986) in total suspended solids that can be obtained for the given basin. The development is 22.2 % impervious, the coefficient of variation of the runoff parameters is the same as that for the rainfall parameters, the fraction of pollutants removed at low flow rates is 1, and the performance n value of the basin is 3. The rainfall statistics for the area are:

1548_Determine the peak outflow rate1.png

(a) Estimate the long-term average reduction (EPA, 1986) in particulates under dynamic conditions.

(b) Estimate the long-term average reduction (EPA, 1986) in particulates under quiescent conditions.

(c) Estimate the overall average reduction (EPA, 1986) in particulates.

Download:- Detention Pond Design.rar

Reference no: EM13372971

Questions Cloud

Physician reimbursement casephysician services according to : physician reimbursement casephysician services according to the centers for medicare and medicaid the 837p professional
Te enhanced products division of evergreen industries : the enhanced products division of evergreen industries makes ceramic pots that are used to hold large decorative
Bioethics on nbcs erconfidentiality builds trust between : bioethics on nbcs erconfidentiality builds trust between health care providers and patients. there are cases when
Refer to and use the following abbreviations for the : refer to and use the following abbreviations for the problems belowbt box of teasamph shipping and handlingp desired
Question 1 the variation of 2sdt q with q of a basin is : question 1. the variation of 2sdt q with q of a basin is given by q 0.00152sdt q2nbsp 0.1952sdt q - 0.3833. the
A closed organ pipe resonates with frequency 6hz and an : a closed organ pipe resonates with frequency 6hz and an open organ pipe resonates with frequency 12hz. if the two organ
Question 1 1a recent study by a major financial investment : question 1 1.a recent study by a major financial investment company was interested in determining whether the annual
Bratland j 2010 capital concepts as insights into the : bratland j. 2010 capital concepts as insights into the maintenance and neglect of infrastructure independent review 15
You must work alone to complete this quiz do not share : you must work alone to complete this quiz. do not share answers or ideas with other students. write your answers

Reviews

Write a Review

Civil Engineering Questions & Answers

  What average force was exerted on the ball

After falling from rest from a height of 32 m, a 0.45 kg ball rebounds upward, reaching a height of 22 m. If the contact between ball and ground lasted 1.5 ms, what average force was exerted on the ball?

  Determine the force that should be developed in the cable

Determine the force that should be developed in the cable if the saddle keeps the pipe from sagging or deflection at its center. The pipe and fluid within it have a combined weight of 125lb/ft. EI is constant.

  Determine the required height z in meters at ground level

Water is contained in a pressurized tank to a level of z meters above the ground. the air pressure over the water surface (in the tank) is 135kPa (abs). Assume the water density is 1000 kg/m^3 and take g=9.807 m/s^2.

  List and describe each of the files that would be required

For a multi-file project that contains just one class, list and describe each of the files that would be required to implement and test the functions of the class.

  Calculate pressure in point 1 nd density of manometric fluid

A U manometer reads 20 cm air as operating fluid and a given manometric fluid. A single branch closed tube reads 35 cm connected to point 1. If P2 = 1.2 ATM calculate the pressure in point 1 and the density of the manometric fluid.

  What is the moment about the z axis due to the force

the weigt w causes atension of 100 lb ic cable cd. if d=2ft, what is the moment about the z axis due to the force eserted by he cable cd at point c.

  Calculate the screen drag force of the screen

The static pressures upstream and downstream of the screen are 0.2 and 0.15 psi and are uniformly distributed over the flow cross section area. Neglecting the force exerted by the duct wall on the flowing air, calculate the screen drag force.

  Determine what tensile force should be applied to the bar

Suppose that in an apparatus it is necessary to maintain precisely the cross section of a 20mm circular nickel steel bar. If this bar is heated to 200 deg Celcius, what tensile force should be applied to the bar to maintain its cross sectional dim..

  How to design a cyclone that has a collection efficiency

Design a cyclone that has a collection efficiency between 80% and 85% (use parcticle size distribution given below). you must assume a dpc of 4.2 microns,an inlet gas velocity of 25 m/s and a K of 15.

  How the design engineer has decided to support on a system

According to a settlement analysis, the weight of this fill will cause 600 mm of the total settlement over a period of 30 years. The differential settlement will probably be about 100mm. Although the building could be supported on spread footing f..

  What is the pressure drop per unit length along the tube

It is known that the velocity distribution for steady, laminar flowin circular tubes (either horizontal od vertical) isparabolic. Consider a 10 -mm- diameter horizontal tubethrough with ethyl alcohol is flowing with a steady mean velocity.15 m/s.

  Determine the amount of energy added to the water

A mass of 200g of saturated liquid water is completely vaporized at a constant pressure of 100KPa. Determine a) the volume change b) the amount of energy added to the water

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd