Quantity of gas has an initial pressure

Assignment Help Mechanical Engineering
Reference no: EM13706647

A quantity of gas has an initial pressure of 2.72MN/m^2 and a volume of 5.6dm^3(l). It is expanded according to the law PV^1.35 = C down to a pressure of 340kN/M^2. Determine the final volume and work done.

Reference no: EM13706647

Questions Cloud

Pressure and specific volume in isentropic compression : Starting from the ideal gas law and the first law of thermodynamics derive the relationship between a) pressure temperature and, b) pressure and specific volume in isentropic compression show detail proof.
Using exponential smoothing with a weight : Using exponential smoothing with a weight of 0.6 on actual values..If sales are $45,000 and $50,000 for 2010 and 2011, what would be the forecast for 2012? (First forecast is equal to the actual value of proceeding year)
How much heat is added to accomplish : A copper vessel of mass 2kg contains 6kg of water. If the initial temperature of the vessel plus water is 20C and the final temperature is 90C, how much heat is added to accomplish this change assuming that there is no heat loss?
Internal energy stating whether it is increase of decrease : During the compression stroke of an engine, the work done on the working substance in the engine cylinder is 75kJ/kg and the heat rejected to the surroundings is 42kJ/kg. Find the change of internal energy stating whether it is an increase of decreas..
Quantity of gas has an initial pressure : A quantity of gas has an initial pressure of 2.72MN/m^2 and a volume of 5.6dm^3(l). It is expanded according to the law PV^1.35 = C down to a pressure of 340kN/M^2. Determine the final volume and work done.
Measures a wind tunnels velocity n times : During an experiment, an aerospace engineering student measures a wind tunnel's velocity N times. The student reports the following information, based on 90% confidence, about the finite data set: mean velocity=25 m/s, velocity standard deviation=1.5..
Determine the new volume of the gas : 0.112m^3 of gas has a pressure of 138kN/m^2. It is compressed to 690kN/m^2 according to the law PV^1.4 = C. Determine the new volume of the gas.
In a non-flow process there is a heat loss : In a non-flow process there is a heat loss of 1055kJ and an internal energy increase of 210kJ. How much work is done and is the process an expansion or compression?
Air passes through a gas turbine system : Air passes through a gas turbine system at a rate of 4.5kg/s. It enters with a velocity of 150m/s and a specific enthalpy of 3000kJ/kg. At exit, the velocity is 120m/s and the specific enthalpy is 2300kJ/kg. The air has a heat loss to the surrounding..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the first time greater than zero that the

use the equations below. note that the direction is indicated by the sign in front of the equations.x 0.0571 m

  The two flows exchange energy as they flow alongside each

a co-flowing heat exchanger receives air at 800k and 15 mpa and water at 15c and 100 kpa. the two flows exchange energy

  A manometer on the discharge pipe of a pump handling

A manometer on the discharge pipe of a pump handling 8.4m^3/min of water shows a pressure of 3.7*10^5 Pa. The vacuum gage on the suction pipe shows a vacuum of 21 cm Hg. The vertical distance between the places of connection of the manometer and the ..

  A stack t550 deg f and 750mm hg was sampled using epa

a stack t550 deg f and 750mm hg was sampled using epa method 5. the total gas volume that flowed through the dry gas

  What is the section lift coefficient

Consider a NACA 0009 airfoil that has a plain flap whose length is 0.2c and which is deflected 25. a. Calculate cl and cmc/4 When the geometric angle of attack is 4 degrees, what is the section lift coefficient? Where is the center of pressure?

  Consider a steam turbine where steam enters with a

consider a steam turbine where steam enters with a pressure of 10 mpa and temperature 500 degc and expands

  Compute the percentage change in the volume of the oil in

a certain hydraulic system operates at 20.0 mpa. compute the percentage change in the volume of the oil in the system

  A 100-mm long and 20-mm diameter rod of 403-stainless steel

a 100-mm long and 20-mm diameter rod of 403-stainless steel is pulled to fracture with reported results as follows

  For a glass slide e70 gpa that is 75 cm long 2 cm wide and

for a glass slide e70 gpa that is 7.5 cm long 2 cm wide and 1 mm thick what force is necessary to cause a deflection of

  Find stall speed

Find Stall Speed (KEAS) at 1 G, 0 deg AOB and find Stall Speed (KEAS), level flight 70 deg AOB (2.9 G)

  Mass flow rate of air through all devices is 80 kgs show

a gas power cycle compresses air at 1 bar and 300 k state 1 through an adiabatic reversible compressor to 6 bar state

  A piston-cylinder arrangement initially contains water

A piston-cylinder arrangement initially contains water at P = 300 psia and T = 500   oF. The piston is moved to a final position where the volume is twice the initial volume. During the piston movement there is a heat transfer to the water in such a ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd