Provide a functional geometric design layout plan

Assignment Help Other Engineering
Reference no: EM131023246

Assignment

Intersection Performance Analysis and Geometric Design

Wellington Road / Kelletts Road, Lysterfield

BACKGROUND

The intersection of Wellington Road and Kelletts Road is in the suburb of Lysterfield in Melbourne's outer eastern suburbs - Melway reference 82K02.

It is a "T" shaped intersection currently controlled by Give Way signs.

VicRoads is considering whether to upgrade the intersection to a roundabout or traffic signals. There have been a few crashes since 2010.

YOUR TASKS

The VicRoads senior traffic engineer responsible for this area has asked you for a report with sufficient analysis of different forms of intersection control for this site. You have been asked to assess the traffic and safety performance and consider all other matters relating to the choice of intersection control and write a report justifying your recommended treatment.

Provide a functional geometric design layout plan of the intersection for your recommended treatment - either traffic signals or a roundabout.

METHOD

You will use the SIDRA INTERSECTION software in the two Computer Laboratory.

Use SIDRA to analyse the following:

- the existing intersection with Give Way signs, with existing (2014) traffic volumes,
- a roundabout,
- traffic signals.

For a comparative check, also calculate the capacity and degree of saturation of the main movements at the existing unsignalised intersection, using manual methods.

You will need to analyse the intersection for the morning and afternoon peak hourly volumes.

For the traffic signals case, you need to analyse several options to determine the most efficient geometry and phasing that gives the best intersection performance. Some choices will also depend on your assessment of safety. Right turn movements may be fully controlled, partially controlled or filter only. You must present the SIDRA outputs for at least 3 sensible variations in the Appendices to your report.

Generally, assume that parameters are the same as SIDRA defaults. However, these may be modified if this would result in a more realistic assessment.

THE REPORT

Your report should discuss and recommend the best form of control for this intersection.

1. Your report should include the following:
a) A copy of the SIDRA Layout diagram for each of the three control types (signals, roundabout and Give Way sign) and any other geometric options analysed
b) A copy of the SIDRA Volume Summary diagram for the AM and PM peak periods
c) For each scenario, a copy of the SIDRA Intersection Summary
d) For the signalised intersection case, a copy of the proposed signal phasing, with the type of right turn control to be used
e) A copy or record of any other important input or output data, particularly where you have adopted values different to the SIDRA defaults
Note: (a) to (d) above can be simply copied from SIDRA and pasted into a Word document.

2. Comment on the most important SIDRA performance measures.

3. Discuss other considerations that affect the decision about the type of intersection control and the overall functional design of the intersection.

4. Provide a succinct conclusion with a clear recommendation to the VicRoads senior traffic engineer.

THE LAYOUT PLAN

Produce and attach to the report an AutoCAD drawing for the preferred functional layout of traffic signals or a roundabout for this intersection (whichever you are recommending). This should be to scale on A3 paper and include the following features:

1. geometric layout of kerbs
2. all pavement markings
3. traffic sign locations
4. for traffic signals:
a. location of signal posts
b. signal lantern arrangements

You do NOT need to show underground services. Base dimensions can be taken as best you can from the plan supplied and the aerial photo.

Attachment:- Wellington Kelletts.rar

Attachment:- Wellington Kelletts Previous Upgrade.rar

Reference no: EM131023246

Questions Cloud

Which bond fund has higher risk : Which bond fund has higher risk (all else being equal): a fund with an average maturity of 10 years, or a fund with an average duration of 9 years?
Explain your strategy for solving the problem : During the play, each player, in turn, draws a question at random from a stack of questions. The player then answers the question based on the cards that he /she sees (not the player's cards, which the player cannot see).
Calculate m1 and m2 for both periods : Using these data, calculate M1 and M2 for both periods. Describe how M1 velocity and M2 velocity differ in the two quarters.
What would happen to the values of m1 and m2 : What are Retail Money Funds? What percentage of M2 are they? If households were to shift funds from savings accounts to checking accounts, what would happen to the values of M1 and M2?
Provide a functional geometric design layout plan : Discuss other considerations that affect the decision about the type of intersection control and the overall functional design of the intersection - Calculate the capacity and degree of saturation of the main movements at the existing unsignalised..
How else could they have bought and sold goods : During the Civil War, the Confederate States of America printed large amounts of its own currency- Confederate dollars-to fund the war. By the end of the war, the Confederate government had printed nearly 1.5 billion paper dollars. How would such ..
The account immediately after you make the first withdrawal : To complete your last year in business school and then go through law school, you will need $10,000 per year for 4 years, starting next year (that is you will need to withdraw the first $10,000 one year from today). How much will be in the account im..
At what rate was energy consumption changing in 2008 : A restaurant has an annual demand for 900 bottles of a California wine. It costs $1 to store one bottle for one year, and it costs $5 to place a reorder. Find the number of orders that should be placed annually.
What is price deflation : In the same article, Ambrose Evans-Pritchard, a writer for the London-based newspaper The Telegraph, is quoted as saying: "Deflation has ... insidious traits. It causes shoppers to hold back. Once this psychology gains a grip, it can gradually se..

Reviews

Write a Review

Other Engineering Questions & Answers

  What is the effort force of the motor

A block and tackle system with 4 supporting strands is used to lift a large metal plate in a automotive factory. What is the effort force of the motor needed to lift a 60 lb plate?

  Pressure drop for an extensive range of pipe flow rates

Measure the pressure drop for an extensive range of pipe flow rates. Measure the volume flow rate using a graduated cylinder and a stopwatch.

  Determine the depth of water

A prismatically shaped gate placed at the end of a freshwater channel is supported by a pin and bracket at A and rests on a frictionless support at B. The pin is located at a distance 4 h = in. below the center of gravity C of the gate. Determine ..

  Find the value of cc

A CMOS op amp with the topology shown in Fig. is designed to provide Gm1 = 1 mA/V and Gm2 = 5 mA. Find the value of CC that results in ft = 80 MHz.

  Calculate the conductor temperature

Calculate the conductor temperature when the air temperature is 20°C and the line is subjected to cross flow with a velocity of 10 m/s.

  Create an edge-triggered d flip-flop

To simulate the operation of a circuit used to create an edge-triggered D flip-flop. To test the operation of a 74LS74 D flip-flop. To test the operation of a 74LS112 J-K flip-flop

  Crystal orientation of silicon

How long does it take to grow 100nm of oxide in wet oxygen at 1000oc (assume 100crystal orientation of silicon) ? In dry oxygen? Which process would be perfect?

  Find the frequency to which the first pole must be lowered

If the frequency of the second pole is 20 MHz and if it remains unchanged while additional capacitance is introduced as mentioned, find the frequency to which the first pole must be lowered so that the resulting amplifier is stable for closed-loop..

  Determine the vertical displacement

Determine the vertical displacement at node 3 and the rotations at node 2 and 3 by using two elements. Also compute the reaction forces and moment at nodes 1 and 2.

  Disc profiles in order to get job

Part 1: Write a brief essay describing two ways you would effectively use the DiSC profiles in order to get job.

  Is the common iliac vein anterior

Is the common iliac vein anterior or posterior to the femoral artery?

  Find low-frequency gain am and frequencyof transmission zero

For an emitter follower biased at IC = 1 mA, having Rsig = RL = 1 kΩ, and using a transistor specified to have Ft = 2 GHz, Cμ = 0.1 pF, CL = 0, rx = 100Ω, β = 100, and VA =20 V, evaluate the low-frequency gain AM, the frequencyof the transmission ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd