Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
1.Calculate the head loss per 100 m pipe for the water (25 degree Celsius) flowing at 100 M^3/hr through a 15-cm diameter cast iron pipe
2.A channel which has a trapezoidal cross-section with a bottom width of 6 m and side slopes 1:2 discharges water at a rate of 5 m3/s. Determine the critical depth.
3.Prove clausius inequality in steam power plant operating in cycle.given that heat transfer in boiler =2070kJ/kg at 164 degree celcius ;heat tranfer in condenser =1905 kJ/kgat 52 degree celcius.
A square yellow-brass bar must not stretch more than 2.5 mm when it is subjected to a tensile load. Knowing that E = 1.5 GPa and that the allowable tensile strength is 150 MPa
If the overall gear reduction ratio is 8 to 1, what is the maximum acceleration from rest (in ft/sec^2) for: a) the car with the base engine? b) car with the modified engine? Assume the car is on good dry pavement.
Two ropes are attached to the eye bracket. The resultant force R of the two forces equals 1000-lb and the line of action is directed along the x-axis. if the magnitude of force F1 is 250-lb, determine the magnitude of force F2 and the angle
Two remediation options are being considered for a contaminated land area formerly used for industrial operations. Option 1 involves removing all of the contaminated soil over a two-year period at a cost of 2.2$ million per year
Draw the flow net for the steady state seepage flow which occurs under this wall. From the flow net determine the distribution of water pressure on the side AB of the wall and then find the resultant force (per metre run into the page) exerted by ..
How was this answered reached? what equation was used? equation of a line? could you please explain how the answer was reached and a detailed explanation of the math behind it.
Steam flows steadily through an adiabatic turbine. Theinlet conditions are 10 MPa, 450 C and 80 m/s. and the exitconditions are 10 kPa, 92% quality at 50 m/s.
In a three phase balanced system, a delta connected source supplies power to a wye connected load. If the line impedance is 0.2 + j0.4 ohms, the load impedance 3 + j2 ohms, and the source phase voltage Vab = 208 at a 10 degree angle (V rms).
A dam is inclined at an angle of 30o from thevertical and has the shape of an isosceles trapezoid 100 ft wide atthe top and 50 feet wide at the bottom and with a slant height of70 ft. Find the hydrostatic force on the dam when it is full ofwater?
A mass of 5 kg of saturated liquid-vapor mixture of water is contained in a piston-cylinder device at 125 kPa. Initially, 2 kg of the water is in the liquid phase and the rest is in the vapor phase
knowing that both members are in compression and that the force is 15 KN in member A and 10 KN in member B, determine by trigonmetry the magnitude and direction of the resultant of the force applied to the bracket by member A and B.
Design a simply supported one-way reinforced concrete floor slab to span 10 ft and carry a service live load of 175 psf and a service dead load of 25 psf. Use fc' = 3000 psi and fy = 60,000 psi. Make the slab thickness to ½-in. increments.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd