Reference no: EM13964982
The RMC Corporation blends three raw materials to produce two products: a fuel additive and a solvent base. Each ton of fuel additive is a mixture of 2/5 ton of material 1 and 3/5 ton of material 3. A ton of solvent base is a mixture of 1⁄2 ton of material 1, 1/5 ton of material 2, and 3/10 ton of material 3. RMC’s production is constrained by a limited availability of the three materials. For the current production period, RMC has the following quantities of each raw material: material 1, 20 tons; material 2, 5 tons; material 3, 21 tons. Management wants to achieve the following P1 priority level goals.
Goal 1: Produce at least 30 tons of fuel additive.
Goal 2: Produce at least 15 tons of solvent base. Assume there are no other goals.
a- Is it possible for management to achieve both P1 level goals given the constraints on the amounts of each material available? Explain.
b- Treating the amounts of each material available as constraints, formulate a goal programming model to determine the optimal product mix. Assume that both P1 priority level goals are equally important to management.
c- Use the graphical goal programming procedure to solve the model formulated in part (b).
d- If goal 1 is twice as important as goal 2, what is the optimal product mix?
Some scientists predict major changes in the earths climate
: Some scientists predict major changes in the earth’s climate, including a temperature rise of 8º F over the next 60 years. Should any companies be paying attention to this long-range environmental trend? Explain.
|
Expatriate failure or expatriate performance management
: Expatriate failure or expatriate performance management. Answer the following: 1. What is the purpose of this article? What problem or issue does it address? 2. How does the article relate to the textbook? 3. What problems or concerns are you left wi..
|
Identify the key alternative distribution channels
: 3D-Magic is a new company that has developed a revolutionary 3D television. It uses a new technology that provides a much sharper and realistic 3D experience than their competitors. The company is based in the United States. The company's top managem..
|
What would its new volume be at stp
: A chamber sealed with a moveable piston contains 5.50 litres of hydrogen at 28 degrees C and 81.3 kPa.
|
Produce two products-fuel additive and solvent base
: The RMC Corporation blends three raw materials to produce two products: a fuel additive and a solvent base. Each ton of fuel additive is a mixture of 2/5 ton of material 1 and 3/5 ton of material 3. A ton of solvent base is a mixture of 1⁄2 ton of ma..
|
Analytical models in dss
: A company that assembles electronic alarm systems requires three component parts: C1, C2, and C3. In-house production costs are estimated to be $15 per unit for part C1, $18 per unit for part C2, and $ 20 per unit for part C3.
|
What is the frequency of ha in vacuum
: The so-called "hydrogen alpha (Ha) line" is a specific wavelength of red light caused by excited atomic hydrogen. It is frequently used when studying the Sun. The wavelength of Ha is 656.3 nm, or 656.3*10-9 m. The speed of light in vacuum is 3*108..
|
Find the pressure in the tire at that point in si units.
: After driving for several hours, the temperature in the tire reaches 120 degrees Fahrenheit.
|
Possibility of five different undesirable characteristics
: 850 units of a product were examined for the possibility of 5 different undesirable characteristics. A total of 75 defects were found. find How many defects would be expected in a million opportunities (i.e. DPMO)? Using the Six Sigma conversion tabl..
|