Problem on kinematic chains

Assignment Help Mechanical Engineering
Reference no: EM13307201

Assignment on kinematic chains.

Type of chain whether it is locked,constrained or unconstrained??

counting number of joints,pair and links.

Tell me any easy way to count these things?

Reference no: EM13307201

Questions Cloud

What is the speed of the package just as it reaches spring : A 2.0 ð‘˜ð‘" package is released on a frictionless ramp inclined 53.1 ° above the horizontal, What is the speed of the package just as it reaches the spring
What input function is used to read a single character : What functions are used instead of the >> and
Determine peak discharge if unit hydrograph is triangular : A hydrograph has a uniform rainfall intensity of 1.5 in/hr in the first hour, 2.0 in/hr in the second, and 0.75 in/hr in the third hour. Direct runoff (in inches) using the SCS method is 1.2in.
Determine the current through each bulb : For the third circuit, consisting of a single battery and two light bulbs in parallel, how does the brightness of the bulbs compare to the first circuit, What is the current through each bulb
Problem on kinematic chains : Assignment on kinematic chains - Type of chain whether it is locked,constrained or unconstrained?
Write a computer program that calculates the average : The following is a list of 20 exam scores. Write a computer program that calculates the average of the top 8 scores.
Find actual concentration for both pollutants for emissions : An industrial off gas steam must be treated for both particulates and SOx. The gas is at 1500 degrees F and 1.5 atm of pressure containing 80 mg/cubis meter of particulates and 25 mg/cubic meter of SOx.
Determinate sentencing and truth-in-sentencing practices : Compare and contrast determinate sentencing and truth-in-sentencing practices. How would social problem and responsibility perspectives argue for one or the other?
Explain java data streams : Explain Java data streams. How do we move different types of data from one place to another in Java. What different types of data streams are there?

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the scalar component of the moment

Determine the scalar component of the moment at point 0 about line OB and the reaction at 0 - average normal and shear stresses on plane BB.

  What is the enthalpy

What is the enthalpy of this reaction? Assume that no heat is lost to the surroundings or to the coffee cup itself.

  Determine the final temperature and specific volume

Steam at 100 psia, 500oF is throttled to 20 psia. Changes in kinetic energy are negligible for this process. Determine the final temperature and specific volume of the steam.

  Determine an expression for the number of cycles to failure

Determine an expression for the number of cycles to failure, Nf if the initial crack size is a0. State any assumptions you make.

  Compute the transit time of an electron

Consider the 2.0micrometer long GaAs device where the E-field is 5kV/cm and Mn*=.067M0. Calculate the transit time of an electron through the device if the mobility is 8000 cm^2V-s.

  Find the lift and drag per meter span acting on the airfoil

Consider two-dimensional flow over the double-wedge airfoil shown. Find the lift and drag per meter span acting on the airfoil and sketch the flow pattern. Find the pressure acting on all surfaces.

  Determine the turbine work output

Determine (a) the turbine work output, in kJ/kg, and (b) the thermal efficiency of the cycle. Also, show the cycle on a T-s diagram with respect to saturation lines.

  Develop a system of equations and solution

Depron is a polystyrene foam, popular as a material for the manufacture of fast food trays and packaging. It is much lighter than balsa wood and can be cut with a sharp blade, sawn with a fine.

  Sketch hoop and radial stresses in the wall of cylinder

the cylinder is made from steel where yield stress= 240 MPa and v=0.3. Subsequently sketch the hoop and radial stresses in the wall of the cylinder.

  Determine the net work done per cycle

If the peak pressure and peak temperature of the cycle are 4.8 MPa and 2500, determine the net work done per cycle (kJ/kg) and the cycle thermal efficiency .

  What are the tensions in cables ef and eg

The system shown anchors a stanchion of cable-suspended roof. If the tension in cable AB is 900 kN, what are the tensions in cables EF and EG?

  Calculate the power required to drive the plant

A refrigerating plant operating between temprature limit of 253k and 307k provides 4.5kJ/s of refrigerating effect. If the refrigerating efficiency of the plant is 0.76. calculate the power required to drive the plant.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd