User Account

All Pages

Prepare the cad drawings

Assignment Help Civil Engineering
Reference no: EM13317891

Need to prepare the CAD drawings:

1647_CAD drawings.png

Reference no: EM13317891

Questions Cloud

Determine the waters speed in the wider pipe : Water flowing in a horizontal pipe is at a pressure of 1.55 105 Pa at a point where its cross-sectional area is 6.00 m2. Find the water's speed in the wider pipe
Estimate cross sectional dimension of bar under strain : A 1000 in diameter solid steel (p= 0.303) bar is 10.0 ft long. Under a tensile load. (a) Estimate the lateral strain experienced by the bar (b) Estimate the cross sectional dimension of the bar when under strain
Estimate the net outward force on a passengers eardrum : An airplane takes off at sea level and climbs to a height of 480 m. Estimate the net outward force on a passenger's eardrum assuming the density of air is approximately constant
What is the first order decay coefficient in day-1 : A tank operated as a CFSTR used to remove benzene from a flow stream is 1500 m3 in size. The flow rate in and out of the tank is 8 m3/day. If the influent benzene concentration of 265 ug/L and the effluent concentration is 12 ug/L
Prepare the cad drawings : Need to prepare the CAD drawings
How much work is done by the tension in the cable : A rescue helicopter lifts a 60 kg person straight up by means of a cable. The person has an upward acceleration of 0.70 m/s2, How much work is done by the tension in the cable
Determine what is the volume of the lake in cubic feet : Nitrification, the conversion of ammonia to nitrate (NH3 -> NO3-) occurs in the lake according to first - order kinetics. One stream feeds the lake and one stream empties the lake with the flow rate in both being 8 cfs
What is the flow speed in the narrower section : An ideal fluid flows at 12 m/s in a horizontal pipe. If the pipe narrows to half its original radius, what is the flow speed in the narrower section
Calculate what should the sample volume be : The dissolved oxygen of sample water is 1.5 mg/L. At 25 C, the dissolved oxygen of the dilution water is 8.25 mg/L. You are told the BOD5 of the sample is 130 mg/L. You have a target final dissolved oxygen of 3.0 mg/L

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compose a list here of the geological terms

Was the dam itself of sound design and a product of quality construction?

  Determine draft when the barge is empty of all corn and rain

A barge measures 10 ft (depth) by 35 ft by 120 ft and weighs 100 U.S. tons. The barge floats in fresh water (specific weight = 62.4 lb/ft3) and is evenly filled with 38,000 bushels of corn (60 lb/bushel).

  How to approximate the number of the 120 intervals

At a specified point on a highway, vehicles are known to arrive according to a poisson process. Vehicles are counted in 20 second intervals, and vehicle counts are taken in 120 of these time intervals.

  How many days will contractor require to complete the work

A contractor has both a 3-cy and a 5-cy shovel in the equipment fleet. Select the minimum-size shovel that will excavate 400,000 bcy of common earth in a minimum of 130 working days of 8 hr each.

  What minimum size pipe laid on the respective minimum slope

A MH at an intersection has an inflow from three 8-inch PVC (n = 0.01) sanitary sewer pipes laid at minimum slope converging at an intersection and one pipe taking the flow from those three further downstream.

  Calculate the mass emissions rate of no2

Assuming that the average stack gas velocity is 10.0m/s and the stack is circular with a 3.0 meter diameter, calculate the mass emissions rate of NO2 in kg/day.

  Determine the deflection angle to the last full station

Determine the deflection angle to the last full station on a horizontal curve with Da=3 degrees. The PI is located at station 12.20 and the central angle is 24 degrees.

  Compute linear arc distance along the parallel from b to c

Assume the earth is a sphere with a radius of 6,371,000.000 meters. Three points are defined by their latitude and longitude. Point Latitude (N) Longitude (W) A 40° 25' 48.67" 86° 54' 54.00" B 40° 25' 47.00" 86° 54' 54.00" Purdue CE C 40° 25' 47.0..

  Maximum acceptable tensile service load

Compute the maximum acceptable tensile service load T that may act on a single angle L6x4x3/4 that is welded along only one leg to a gusset plate; thus, there are no holes. The service load is three times the dead load. Solve for a0 A36 steel.

  What is the ratio of the strain in the middle bar to strain

Three prismatic bars, two of material A and one of material B, transmit a tensile load P. The two outer bars (material A) are identical. The cross-sectional area of the middle bar (material B) is 50% larger than the cross-sectional area of one of ..

  Determine the angle theta for equilibrium from two springs

The 10-lb lamp fixture is suspended from two springs, each having an unstretcfhed length of 4 ft and stiffness of k=5lb/ft. Determine the angle theta for equilibrium.

  Absolute pressure of the carbon dioxide in the can

The circular top of a can has a radius of .0320m. the pull-tab has an area of 3.8x10^-4 m^2. The absolute pressure of the carbon dioxide in the can is 1.40x10^5Pa. find the force that these gas generates on the top of a can?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd