Plot the normalized concentration versus normalized time

Assignment Help Civil Engineering
Reference no: EM13304953

Write the mass balance equation for a completely mixed lake with an impulse input of mass, M, added at time t = 0. Assume the lake is of constant volume, V, with continuous outflow, Q, and a conservative substance. Solve for the outlet concentration in terms of the initial concentration C0, the mean hydraulic detention time, td, and time t. Plot the normalized concentration, C/C0, versus normalized time, t/ td. How long does it take for 90% of impulse input of material to be depleted from the system?

Reference no: EM13304953

Questions Cloud

What is the power delivered when this freezer is on : A freezer of resistance 14.5ohms is connected to a 110V source. What is the power delivered when this freezer is on
Asp.net and database web application : Database table definition is provided along with the marking craitria for better answer
Compute the change in volume of water stored over one year : Annual rainfall over the watershed is 36 inches and the annual runoff from the catchment is 12 inches. Evaporation from the reservoir averages 40 inches per year. The municipal water demand equals 100 million gallons per day
What is the gravitational attraction between them : A newly discovered planet has a mass of 7.88 x1026 kg, and has a satellite whose mass is 6.44 x 1011 kg. what is the gravitational attraction between them
Plot the normalized concentration versus normalized time : Write the mass balance equation for a completely mixed lake with an impulse input of mass, M, added at time t = 0. Assume the lake is of constant volume, V, with continuous outflow, Q, and a conservative substance.
Find the magnetic field at street level directly under cable : the overhead cable for a street trolley is strung horizontally 5 m above the ground. What is the magnetic field at street level directly under the cable
What is the dipole moment of the bar : Suppose that the dipole moment associated with an iron atom of an iron bar is 2.7 x 10-23 J/T. Assume that all the atoms in the bar, What is the dipole moment of the bar
Determine the intensity of w1 and w2 for the resultant force : The post is embedded into a concrete footing so that it is fixed supported. If the reaction of the concrete on the post can be approximated by the distributed loading, determine the intensity of w1 and w2
How does the combination work for band pass or band stop : A low pass filter has a cut-off frequency of 5 kHz and a high pass filter has a cut-off frequency of 8 kHz. These two circuits are connected back to back in cascade to form an input-output system

Reviews

Write a Review

Civil Engineering Questions & Answers

  Draw p-v dia for pure component and label appropriate point

Draw a P-V diagram for pure component and label appropriate points such as superheated region, isothermal line, etc.

  Determine how much sand did driver place in the drum

A truck driver used sand to soak up a 1 g spill of lindane (C6H6Cl6). He placed the contaminated soil in an open drum which then filled with 150 L of water during a rainstorm. You test the water and find a concentration of 17 M/L.

  Determine the magnitudes of the components faa and fbb

Force F with magnitude indicated acts at point o. determine the magnitudes of the components Faa and Fbb along directions a-a and b-b so that F=Faa+Fbb

  Show that car must have exceeded the speed limit of 55 mph

As a highway patrol officer, you are patricipating in a speed trap. A car passes your patrol car which you clock at 55 mph. One and a half minutes later, your partner in another patrol car situated two miles away from you, clocks the same car at 5..

  Calculate temperature of the air at the exit of the nozzle

Assuming that the nozzle is well insulated and operating at steady state and that the air behaves as an ideal gas, calculate (a) the mass flow rate of air in kg/s, (b) the exit area of the nozzle in m^2,

  What maximum load can be applied tot the center of the beam

A simply supported steel 'I beam' is made of three 1"*8" plates with a mass of 898.4 lbmass each as shown in I beam form. Steel has a modulus of elasticity of 30*10^6 psi. The beam is allowed to deflect 1.05 inch.

  Determine the moment of the couple formed by the two forces

Two parallel 40-N forces are applied to a lever. Determine the moment of the couple formed by the two forces (a) by resolving each force into horizontal and vertical components and adding the moments of the two resulting couples

  Estimate force r on reducer when water flows through reducer

For any flowrate, the pressures in the pipes upstream and downstream of the reducer are expected to be related by using Bernoulli's equation where p1 and p2 are the upstream and downstream pressures and V1 and V2 are the upstream and downstream ve..

  Problem on coefficient of rolling resistance

What is the minimum distance from the stalled car at which the driver could apply the brakes and still stop before hitting it? Assume coefficient of rolling resistance of 0.013.

  Derive mathematical relation describing calibration curves

An orifice meter was calibrated for dry air at T=90 F and P=1.3 atm. The calibration data are as follow: dp(inches of water): 0,0.5,1.0,2.0,3.0,4.0,5.0 Q(ft^3/minute): 0,2.0,3.0,4.2,5.0,5.5,5.8

  How long would it take for the sled to reach at end of track

In 2003 at Holloman Air Force Base in New Mexico, test engineers set a world record by moving 192 lb payload at 6,453 miles per hour in a rocket sled. The rocket sled track, built in 1954, is 15.44 km in length.

  Determine a complete set of dimensionless parameters

Water flows over a dam. Assume the volume flowrate per unit length q along the dam is a function of the head h , width b, acceleration of gravity g, f luid density and the fluid viscosity. Determine a complete set of dimensionless parameters

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd