Plot magnitude of the force exerted on the gate by the brace

Assignment Help Civil Engineering
Reference no: EM13319168

A 200lb homogeneous gate of 10ft width and 5ft length is hinged at point A and held in place by 12ft long brace as the bottom of the brace is moved to the right the water level remains at the top of the gate. the line of action of the force that the brace exerts on the gate is along the brace.

(a) plot the magnitude of the force exerted on the gate by the brace as a function of the angle of the gate, theta for 0<= theta<= 90

(b) repeat the calculation for the case in which the weight of the gate is negligible. comment on the results as theta->0

Reference no: EM13319168

Questions Cloud

An economy is faced by the exhaustion of an important : An economy is faced by the exhaustion of an important natural resource at a time when it is introducing improved technology.using a diagram how these events will affect the economy production possibility curve.
Evaluate the ph of the solution formed by naoh : Calculate the pH of the solution formed by the addition of 55.5 mL of 0.100 M NaOH to 49.2 mL of 0.100 M H3PO4.
Compute the coefficient of price elasticity : What is the formula for measuring the price elasticity of supply? Suppose the price of apples goes up from $20 to $22 a box. In direct response, Goldsboro Farms supplies 1200 boxes of apples instead of 1000 boxes
Determine the acoustic power emitted by the howler : The howler monkey is the loudest land animal and can be heard up to a distance of 1.3km. determine The acoustic power emitted by the howler
Plot magnitude of the force exerted on the gate by the brace : A 200lb homogeneous gate of 10ft width and 5ft length is hinged at point A and held in place by 12ft long brace as the bottom of the brace is moved to the right the water level remains at the top of the gate.
How many units will be traded at a price : The market for DVD’s has a supply and demand curve P’= 2Qs and P=42-Qd a. How many units will be traded at a price of $35? At $14? Which participants will be dissatisfied at these prices?
Compute the potential of a hydrogen electrode : Calculate the potential of a hydrogen ( p= 1.02 atm) electrode in an aqueous solution of HBr (0.05 m ) at 298 K A) assuming ideal solute behavior. B) using the Deby- Huckel equation.
Absolute maximum non-dimensional shear stress : Bearing stresses are very common in aerospace engineering. It occurs on the surface of contact between any two structural members. Bolts, pins, and rivets are classic examples of where bearing stresses occur.
Where should she buy the suit : Finally, she can take an hour drive to out of town to a neighboring city and pay 84 for the suit. Hannah makes $85 dollars and hour where she works. She has time to take off work to purchase her suit, so each hour away from work is 80 dollars in lost..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the force of the rod on the particle and the force

The particle has a mass of 0.6 and is confined to move along the smooth horizontal slot due to the rotation of the arm .Determine the force of the rod on the particle and the normal force of the slot on the particle when = 35.

  What will be the new level of service

If an additional 11ft lane is added (each direction) and all other factors stay the same, what will be the new level of service?

  What percentage increase will be in the flow from house

suppose a family of four, living in a home with an area of 100x5oft connects its stormwater drain to the sewer. Assume that 1in of rain falls over 1 day. what percentage increase will there be in the flow from their house over the dry weather flo..

  Calculate the mass flow rate for the concentrate stream

A magnetic separator processes 500 kg/hr of finely ground magnetite ore (Fe3O4). The ore containes 35% magnetite and an analysis of the concentrate and tailings shows that they contain 59.5% Fe and 3.8% Fe

  What is expected ground level concentration 2 km downwind

The SO2 emission from a fixed source is 25 g/s. The effective stack height is 60 m, the wind speed is 4 m/s at the top of the stack. Assuming class C stability, what is the expected ground level concentration 2 km downwind

  Determine what is the largest value of the force f

The weight of the box is 20 lb and the coefficient of static friction between the box and the floor = 0.65. Neglect the weights of the bars. What is the largest value of the force F that will not cause the box to slip

  Determine time required to dry grain at relative humidity

A batch dryer with a grain depth of 20 inches contain 21,000 pounds of 20.7% (wb) moisturecontent shelled corn. An airflow of 75,000 pounds dry air per hour is supplied at a temperature of 175°F. The ambient air is 55°F at 100% relative humidity.

  Determine what is the unloaded braking efficiency

a level test track has a coefficient of road adhesion of 0.80, and a car being tested has a coefficient of rolling friction that is approximated as 0.018 for all speeds. the vehicle is tested unloaded and achieves the theoretical minimum stop in 1..

  Determine the sludge age and cell wastage flow rate

Assume: Suspended solids in effluent negligible Wastage is from aeration tank Yield coefficient = 0.4 Bacterial decay rate = 0.04 1/d Effluent BOD5 = 10mg/L F/M = 0.33 mg/mg*d BOD5 after primary settling = 150mg/L MLVSS = 1700mg/L MLSS = 1.4(MLVSS..

  Find the maximum production rate of b in moles per minute

Find the maximum production rate of B in moles per minute and the optimum  for (a) a plug flow reactor (b) a mixed flow reactor Find the production rate of B in moles per minute for (c) a mixed flow reactor with V = 100 m3

  What is the normality of a sodium hydroxide solution

What is the normality of a sodium hydroxide solution that contains 250 mg/L NaOH in 2.3 L solution? What is the concentration in mole/L and mg/L as CaCO3. Na = 23, OH = 17

  Compute the normal flow rate through the channel

A large drainage channel has a trapezoidal cross section with a bottom width of 75 feet and bank side slopes of 4:1 (H:V). If the normal depth of flow is 25 feet, compute the normal flow rate through the channel (Q in cfs).

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd