Percent elongation and percent reduction in area

Assignment Help Civil Engineering
Reference no: EM1385524

Three different materials, designated A, B, and C, are tested in tension using test specimens having diameters of 0.755 in. and gage lengths of 2.5 in. At failure, the distances between the gage marks are found to be 2.68 in., 3.02 in., and 3.35 in., respectively. Also, at the failure cross sections the diameters are found to be 0.731 in., 0.645 in., and 0.587 in., respectively. Determine the percent elongation and percent reduction in area of each specimen.

Reference no: EM1385524

Questions Cloud

Essentialism and feminist theory : How has feminist theory itself been criticized as essentialist? How do such criticisms relate to those claims that feminists themselves make against traditional philosphical concepts?
Cowboy saddle company manufactures plastic saddles : The Cowboy Saddle Company manufactures plastic saddles that are used in the assembly process of their Mr. Ed doll. If the run time for producing a batch of saddles is 4 days
Ethical issues with aging : Provide an overview of the ethical challenges a feminist/female-centered ethical framework brings to the discussion of how to best care for the aging/elderly.
Select the accommodation that would not be a reasonable : Select the accommodation that would not be a "reasonable accommodation" for employees with a disability: A.providing a ramp for wheelchair use B.providing an interpreter for a deaf applicant
Percent elongation and percent reduction in area : Also, at the failure cross sections the diameters are found to be 0.731 in., 0.645 in., and 0.587 in., respectively. Determine the percent elongation and percent reduction in area of each specimen.
Ethics and legal issues-internet : After tedious negotiations, ExtremeNet and Allen Lopez have agreed to have their case resolved by arbitration. resolve the follwing questions:
Assume no safety stock or service level requirement : assume no safety stock or service level requirement. In order not to run out of stock before the receipt of a new order, at what inventory level should the firm place an order? That is, what is the reorder point equal to?
Problem related to skaters with masses : Physics two skaters with masses of 65 kg and 45 kg, respectively stand 8.0 m apart each holding one end of a rope.
Commissioner of public works : A town's department of public works is concerned about adverse public reaction to a sewer project that is currently in progress. Because of this, the Commissioner of Public Works

Reviews

Write a Review

Civil Engineering Questions & Answers

  Depth of the sedimentation tank

A drinking water treatment plant will be designed to process a flow of 15,000 m3/d. The sedimentation tank will have a residence (detention) time of 4 hours and the overflow rate (Q/A) of 16 m 3 /m 2 -day. Estimate the required surface area (A), an..

  Commercial management in civil engineering

Devise a appropriate management system that you as a commercial manager for the contractor would recommend to the project team for use on a construction or building contract.

  Resultant force from all fluids

A tank is filled with oil (specific gravity 0.8) and water to a depth of 10 meter and 6 meter respectively. Find the resultant force from all fluids acting on the gate of 1.8 meter by 9 meter.

  Difference between dry and moist lapse rate

Explain how the desert air can contain much more h 2 o vapor in the air than the pole, and still a lower humidity than the pole? what causes the difference between dry and moist lapse rate?

  Concept of strengthening mechanisms

Describe in your own words the three strengthening mechanisms i.e., grain size reduction, solid solution strengthening, and strain hardening. Be sure to explain how dislocations are involved in each of the strengthening techniques.

  Velocity and acceleration of the flow

The volume flow rate of streams into the pipe is given by QA = 0.02t m 3 /s and that of stream B by QB = 0.008t 2 m 3 /s, where t is in seconds. The exit area of the pipe is 0.01m 2 . Find velocity and acceleration of the flow at exit at t = 1s.

  Problem on coefficient of rolling resistance

What is the minimum distance from the stalled car at which the driver could apply the brakes and still stop before hitting it? Assume coefficient of rolling resistance of 0.013.

  Designing the tangent vertical curve

Due to a street crossing a roadway, the elevation of the roadway at station 3 +413.760 must be at 129.388 m. Design the curve?

  Horizontal distance between the points

A runs slope a distance of 156.777 m from one point to another point at a rate of +1.5%. What is the corresponding horizontal distance between the points?

  Case study-disaster identifying safety management

Conduct a Case Study on this disaster identifying safety management, safety audits, accident investigation, and industrial hygiene issues. Your Case Study should be a minimum of 500 - 600 words and contain the components listed above.

  Write a report on toxic and hazardous waste

Toxic and Hazardous waste: how are they treated, safety measures, regulations in USA about hazardous waste.

  Tensile modulus of elasticity

Calculate the tensile modulus of elasticity for a 10 laminated composite consisting of 62 percent by volume of unidirectional carbon fibers and an epoxy matrix under isostress conditions.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd