User Account

All Pages

Object-oriented approach to software development

Assignment Help Mechanical Engineering
Reference no: EM13888734

Explain why an object-oriented approach to software development may not be suitable for real-time systems.

Show how the Environmental Control pattern could be used as the basis of the design of a system to control the temperature in a greenhouse. The temperature should be between 10 and 30 degrees Celsius. If it falls below 10 degrees, the heating system should be switched on; if it goes above 30, the windows should be automatically opened.

Reference no: EM13888734

Questions Cloud

Determining the possible process architecture : If a periodic process in the onboard train protection system is used to collect data from the trackside transmitter, how often must it be scheduled to ensure that the system is guaranteed to collect information from the transmitter? Explain how yo..
Strategy a planned product modification approach : 1.It has often been suggested that products are intentionally made to break down or wear out.
How do compare to sweatshops : Explore the online exhibit about the 1911 Triangle Shirtwaist Factory fire (www.ilr.cornell.edu/trianglefire). What were working conditions like? Search the Internet for information on sweatshops in the 21st century. How do these compare to sweats..
Process architecture for environmental monitoring system : Design a process architecture for an environmental monitoring system that collects data from a set of air quality sensors situated around a city. There are 5,000 sensors organized into 100 neighborhoods.
Object-oriented approach to software development : Explain why an object-oriented approach to software development may not be suitable for real-time systems.
What is the basic formula for the markup percentage : What is the basic formula for the markup percentage? What are some of the factors that affect a company's desired ROI?
What are the two types of pricing environments for sales : What are the two types of pricing environments for sales to external parties? In what situation does a company place the greatest focus on its target cost? How is the target cost determined?
Benefits and risks of caterpillar line extensions : Case I - product Development. Why is Caterpillar so careful to test-market its products prior to commercialization? What are some of the benefits and risks of Caterpillar's line extensions
Description of the issue of controversy : Description of the issue of controversy

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The modulus of elasticity and poissons ratio

At the proportional limit, a 1.5-in. gage length of a 0.375-in.-diameter alloy rod has elongated 0.0081 in. and the diameter has been reduced 0.00071 in. The total tension force on the rod was 5.62 kips.

  Determine the work done on the piston by the gas

This mixture is initially at 1800 K and 1 MPa and expands in an adiabatic, reversible process to 200 kPa. Determine the work done on the piston by the gas, in kJ/kg of mixture. Treat the water vapor as an ideal gas.

  Determine the time required by a diesel-electric locomotive

Determine the time required by a diesel-electric locomotive, which produces a constant drawbar pull of 60,000 lb, to increase the speed of an 1800 ton freight train from 20 mi/hr to 30 mi/hr up to 1-percent grade. Train resistance is 10 lb per ton.

  Using the productivity rate of 0013 labor hours per sq ft

a commercial project requires that installation of 1856 sq. ft. of acoustical ceiling. using the productivity rate of

  A ship prototype is expected to travel at a speed of 15 ms

a ship prototype is expected to travel at a speed of 15 ms in water. unfortunately there is no ability to test a 120th

  Determine misclose of the traverse bearing

Compare measured lengths of the toilet block to measurements computed from traversing. Plot details from your field notes and determine the accuracy.

  The carbon dioxide flows out of the tank and through the

a tank contains 1 kg of carbon dioxide at 6 mpa 60 degrees celsius and it is connected to a turbine with an exhaust at

  How would the wheel diameter and the volumes of the

the minto wheel is a power-producing device activated by evaporating and condensing a working substance. the only

  If air flows at a velocity of 5 ms calculate the local

air at 325 k and 70 kpa flows over the upper side of a 1-m-square plate. the upper plate is maintained at a constant

  What is the electrical power available

You are designing a remote-area power supply based on a miniature wind turbine that is 20% efficient. Meteorological data indicates an average wind speed of 24 km/h at an air temperature of 10oC and pressure of 0.9 atm. The rotor has a diameter of..

  The city of houston has a water filtration system that

the city of houston has a water filtration system that consists of a large rigid tank with a single 1.5m diameter inlet

  The piston will be moved slowly and reversibly until 25

one kilogram of saturated liquid methane at 160 k is placed in an adiabatic piston-and-cylinder device and the piston

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd