Hub is shrink-fit onto a solid carbon steel shaft

Assignment Help Mechanical Engineering

Reference no: EM13703077

A brittle cast iron (E = 15 Msi, ? = 0.2, Sut = 30 ksi, Suc = 100 ksi) hub is shrink-fit onto a solid carbon steel shaft. The hub has initial inner and outer diameters of 3.000 and 6.000 inches respectively. What is the largest diameter the steel shaft can have without causing the hub to fail?

Reference no: EM13703077

Questions Cloud

Determine the instantaneous heat input : A power plant produces 1000 MW of electricity and uses residential oil as the fuel. The oil has a heating value, the maximum energy liberated in combustion, of 43 000 kJ/kg. The overall efficiency of the power plant is 52%.

Magnitudes of velocities immediately after they collide : The kinetic coefficients of friction between the 5-kg crates A and B and the inclined surface are 0.1 and 0.4, respectively. The coefficient of restitution between the crates is e = 0.8. If the crates are released from rest in the positions shown, wh..

Ball bearings uses oil whose viscosity ranges : A pump fitted with 50mm bore ball bearings uses oil whose viscosity ranges from 100cSt at cold pump start-up to 7.5Cst when running at maximum speed and load. If these viscosities are the safe limits for the oil, specify the maximum start-up speed an..

Mouse trap car-find force of the spring and find friction : A mouse trap car the length of the car is 41.5cmm and width of the car is 9 cm Length of Cirrus is 32 cm, the Length of the rope that connected from the cirrus till the from wheels is 56 cm, the Height of the vehicle from the ground is 3 cm, The leng..

Hub is shrink-fit onto a solid carbon steel shaft : A brittle cast iron (E = 15 Msi, ? = 0.2, Sut = 30 ksi, Suc = 100 ksi) hub is shrink-fit onto a solid carbon steel shaft. The hub has initial inner and outer diameters of 3.000 and 6.000 inches respectively. What is the largest diameter the steel sha..

Will the same magnus force be created to power the boat : A freely (zero friction) rotating cylinder (mounted on a vertical axis) is placed on a model boat instead of a sail. The Magnus force that is created is used to power the boat. A fan is mounted on the boat to provide airflow over the cylinder.

Determine the unknown viscosity : You are given a small dc motor and fully-charged D battery. How would you use that motor to help determine the unknown viscosity of an oiled sample? You can acquire any other materials needed. What other materials would you need and what procedure wo..

What force is the drill bit placing on the surface : Suppose a 24V drill has a current drawn from it that measures 5 amps. The drill bit is 2 inches in diameter. What force is the drill bit placing on the surface if the speed is 25 rpm? Assume the drill has an efficiency of 90%

A motor has a disk mounted on its shaft : A motor has a disk mounted on its shaft. The disk has a diameter of 1 foot and weighs 60 pounds. Starting from rest, the motor rotates at 350 rpm after 5 seconds. If the motor has a 92% efficiency, determine the input power in watts.

User Account

All Pages