Identify each corner by a suitable description on the sketch

Assignment Help Civil Engineering
Reference no: EM13320547

Make a sketch indicating the incorrect and correct positions of such an original section corner and also the positions of the adjacent corners used in relocating that corner. Identify each corner by a suitable description on the sketch

Reference no: EM13320547

Previous Q& A

  Differential treatment of a person or a group of persons

Discrimination is the differential treatment of a person or a group of persons

  Find is it erect or inverted

When an object is 15.5cm from a lens, an image is formed 14cm. from the lens on the same side as the object. Is it erect or inverted

  What is the value of their cash and marketable securities

Liquidity and Asset Management Ratios Oasis Products, Inc. has current liabilities = $10.2 million, current ratio = 1.70 times, inventory turnover ratio = 12.2 times, average collection period = 22 days, and sales = $102 million.

  Under what circumstances is there an exception to law

under what circumstances is there an exception to the general law that an identified original section corner controls the positions of the boundary lines meeting at or passing through the corner

  Equity section of the balance sheet

Balance Sheet Presentation of Available-for-Sale Investments During 2012, Toney Corporation held a portfolio of available-for-sale securities having a cost of $196,900. There were no purchases or sales of investments during the year.

  Find the average force that the water exerts on the diver

A 60 kg person jumps from rest off a 5m high tower straight down into the water. find the average force that the water exerts on the diver

  What is the amount dubois will receive on the sale

Dubois Inc. loans money to John Kruk Corporation in the amount of $823,200. Dubois accepts an 8% note due in 6 years with interest payable semiannually.

  Estimate the force on the chimney at the bottom of chimney

The wind blows horizontally in a direction which is parallel to one of the diagonals of the cross section. Careful measurement shows that, at height y from the ground, the magnitude of the wind velocity is given

  How long does david measure the train car to be

A very fast-moving train car passes you, moving to the right at 0.50c. You measure its length to be 12m. How long does David measure the train car to be

  Explain the actual revenues and expenditures

Prepare journal entries to record the actual revenues and expenditures. Assume all transactions resulted in increases or decreases in cash.

Reviews

Write a Review

 

Similar Q& A

  How many identical reactors does sony music company require

The plant currently has one CMFR for removal of chromium. How many more identical reactors does the sony music company require to meet the regulatory requirements for chromium discharge of 0.01 mg/L into the Pitman Sewer?

  Ultimate bod of municipal wastewater-reaction rate constant

If bod5 and ultimate bod of a municipal wastewater are 200mg/l and 457 mg/l respectively what is the reaction rate constant? a) .265 b) .050 c) .115 d) .165

  Find what is the tracks radius of curvature at the instant

A race car C is being tracked via telemetry. The on-board acclerometer records and acceleration level of -.7get+.5gen. If you know that the v at this instant is 200km/hr, what is the tracks radius of curvature at this instant

  Determine what is the minimum pipe diameter in the tube

Helium(15 degrees celsius, 1atm) will be transported in a straight horizontal copper tube over a distance of 150 m at a rate of 0.1 m^3/s. If the pressure drop in the tube should exceed 6 in h20, what is the minimum pipe diameter

  Determine what is the standard deviation in w given the fact

You arrive at your bus stop at some random point in the cycle, what is your expected wait time, w(t), to board a bus. Be sure to show your work or you will lose points. What is the standard deviation in w(t) given the fact that there is no bus wait..

  Determine what is the maximum speed attained

The coefficient of rolling resistance can be taken to be a constant for all speeds, equal to 0.008. If the cyclist is coasting down a 6% grade, what is the maximum speed attained

  Determine the max force p that can be applied to the handle

If the coefficient of static friction between the 50-lb roller and the ground is 0.25, determine the max force P that can be applied to the handle, so that the roller rolls on the ground without slipping.

  What is the ratio of the strain energy u1 in the tube

a thin walled circular tube and a solid circular bar of the same material are subjected to torsion. the tube and the bar have the same cross-sectional area and the same length.

  Determine void ratio and dry unit weight of compacted sample

A soil sample is prepared in the laboratory by mixing a certain amount of dry soil with 10.5 wt% water. The relative density of the grains of the material is equal to 2.7.

  How far back from the front axle would the center of gravity

how far back from the front axle would the center of gravity have to be to ensure that the maximum tractive effort developed for front- and rear- wheel-drive options is equal (assume that all other variables are unchanged)

  Determine moisture content required to have full saturation

A sample of dry soil is mixed uniformly with 16 wt% water and then compacted into a cylindrical mold in the laboratory. The volume of moist soil is 1x10-3 m3 and its mass is equal to 1.60 kg.

  What is the probability that if purchased car is better

An automobile that you are looking at purchasing has an advertised fuel mileage of 30 miles per gallon. You rent the car for a week and track your mileage to school and back home and get (miles/gallon)

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd