How muchwork does the tugboat do on the ship

Assignment Help Physics
Reference no: EM13650971

A tugboat exerts a constant force of 5090N on a ship moving at constant speed through a harbor. How muchwork does the tugboat do on the ship in a distance of 3.07 km?

Reference no: EM13650971

Questions Cloud

Estimate the shear modulus of the wood : A plank 2.00 cm thick and 17.9 cm wide isfirmly attached to the railing of a ship by clamps so that the restof the board extends 2.00 m horizontally over the sea below. find the shear modulus of the wood
In the shaping process of powder produced materials : In the shaping process of powder produced materials, the size of the particles is an important characteristic. Name two other characteristics of particles which are of significance and describe how these characteristics affect the material.
Calculate the total energy of the composite system : The bullet penetrates into the block and stops due to itsfriction with the block. Calculate the total energy of the composite system at any timeafter the collision
Determine how far up the incline does the sled move : In a circus performance, a monkey on a sled is given an initialspeed of 3.8 m/s up a 25° incline. How far up the incline does the sled move
How muchwork does the tugboat do on the ship : A tugboat exerts a constant force of 5090N on a ship moving at constant speed through a harbor. How muchwork does the tugboat do on the ship in a distance of 3.07 km
Compute the ratio of the ionization energies of h and d : Calculate the mass of the deuteron given that the first line in the Lyman series of H lies at 82 259.098 cm-1 whereas that of D lies at 82281.476 cm-1. Calculate the ratio of the ionization energies of H and D.
Find what is the energy lost due to friction : A sledge loaded with bricks has a total mass of 18.1 kg and is pulled at constant speed by a rope. what is the energy lost due to friction
Explain how much does the chemical potential of benzene : By how much does the chemical potential of benzene change when the pressure exerted on a sample is increased from 100kPa to 10MPa
Explain what is the maximum number of phases : What is the maximum number of phases that can be in mutual equilibrium in a four component system?

Reviews

Write a Review

Physics Questions & Answers

  How much force is needed to begin moving the book

A 1.83 kg book is placed on a flat desk. Suppose the coefficient of static friction between the book and the desk is 0.442 and the coefficient of kinetic friction is 0.240. How much force is needed to begin moving the book

  Find the average force that the water exerts on the diver

A 60 kg person jumps from rest off a 5m high tower straight down into the water. find the average force that the water exerts on the diver

  What is the stopping distance of the car

Suppose a car is traveling at 13.0 m/s, and the driver sees a traffic light turn red. After 0.570 s has elapsed (the reaction time), the driver applies the brakes, and the car decelerates at 9.00 m/s2. What is the stopping distance of the car, as ..

  What is charge per unit area on plastic sheet

A 10.8 g piece of Styrofoam carries a net charge of -0.700 µC and floats above the center of a large horizontal sheet of plastic that has auniform charge density on its surface. What is the charge per unit area on the plastic sheet?

  What is the angular speed when the meterstick is vertical

After the right string is cut, the meterstick swings down to where it is vertical for an instant before it swings back up in the other direction. What is the angular speed when the meterstick is vertical

  Does the projectile land and what is its range

A cannonball is fired at 100m/s @ 30degrees from the top of a 600m cliff. When does the projectile land, and what is its range?

  Find the friction force on the box

A coiled telephone cord forms a spiral with 56 turns, a diameter of 1.30 cm, and an unstretched length of 60.0 cm. Determine the self-inductance of one conductor in the unstretched cord.

  Determine the power dissipated by the wire

A voltage of 20.0 V is applied across the two ends of a Tungsten wire with a temperature coefficient of resistivity of 4.50×10-3 1/K. determine the power dissipated by the wire

  Determine the isentropic turbine efficiency

Steam enters a compressor at p1= 6 bar, T1= 300 oC and exits at p2= 10 bar.  The work on the system is measured as 200 kJ per kg of water vapor flowing.  Determine the isentropic turbine efficiency.

  What is the length of the telescope

You wish to design a telescope using an objective lens with f(objecive) = 0.75 m. If you use an eyepiece with a magnification of 20, what is the length of the telescope

  A 1600 kg car is traveling along a straight road at 20 ms

a 1600 kg car is traveling along a straight road at 20 ms. two seconds later its speed is 21 ms. what is the magnitude

  Find the current in the secondary

An ideal transformer's primary has 2000 turns and secondary has 50 turns. The primary is connected to a source of 120 V, Find the current in the secondary

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd