How much heat must be supplied to maintain desired temp

Assignment Help Civil Engineering
Reference no: EM13303496

A small building that shelters a water supply pump measures 2 m x 3 m x 2.4 m high. It is constructed of 1- cm thick wood having a thermal conductivity of 0.126 W*m^-1*K^-1. The inside walls are to be maintained at 10 degrees C when the outside temperature is -18 degrees C. How much heat must be supplied to maintain the desired temperature? How much heat must be supplied if the walls are lined with 10cm of glass-wool insulation having a thermal conductivity of 0.0377W.m^-1? Assume there is no heat loss through the floor. Ignore the wood in the second calculation.

Reference no: EM13303496

Questions Cloud

The speed team at ibm : Analyze the case on "The Speed Team at IBM"
Explain detailed response to the network design request : The Technical Term Paper will include the detailed response to the network design request. The document will be submitted in MS Word and will be between 10-15 pages with graphics embedded within the document.
The speed team at ibm : Analyze the case on "The Speed Team at IBM"
Describe the impact of the solicitation process : Based on Cost and Price analysis for contractors, subcontractors, and government agencies:Describe the impact of the solicitation process and how it determines the preparation of your bid.
How much heat must be supplied to maintain desired temp : A small building that shelters a water supply pump measures 2 m x 3 m x 2.4 m high. It is constructed of 1- cm thick wood having a thermal conductivity of 0.126 W*m^-1*K^-1.
Estimate the three-variable var using eight lags of each : Estimate the three-variable VAR using eight lags of each variable and a constant and save the residuals. Explain why the estimation cannot be begin earlier than 1963Q1. What are the potential advantages of using the variables ?lipt and ?4urt instead ..
Compute the final angular speed of the system : A solid, horizontal cylinder of mass 10.0 kg and radius 1.30 m rotates with an angular speed of 5.50 rad/s about a fixed vertical axis through its center. Determine the final angular speed of the system
Could you register the name as a trade mark : What type of business structure do you think would be the best one to adopt for the particular type of business you have described in question 1, above?
What must be the ballancing item : Abbreviated financial statements for Archimides Levers. If sales increase by 10% in 2011 and all other items, including debt, increase correspondingly, what must be the ballancing item? What will be its value?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine at what percent capacity are the trucks operating

Each week 85 trucks bring a total of 2,180 metric tons of municipal solid waste (MSW) to the landfill. Each truck averages two loads per day. Each truck has a capacity of 4.5 metric tons and they operate 5 days/week.

  What is velocity of blocks 5 after blocks started moving

What is the velocity of the blocks 5.00 after the blocks have started moving. Assume that the rope joining the two blocks in long enough so that, at this time, block A is on the frictionless surface while block B is still on the rough surface.

  Design a horizontal curve with a 40-degree central angle

Design a horizontal curve with a 40-degree central angle (delta=40) for a two-lane road with 11-ft lanes. The design speed is 70 mi/h and superelevation is limited to 0.06ft/ft. Give radius, degree of curvature, and length of curve

  At what temperature does the liquid solidify

What is the composition of this last remaining liquid phase?

  Determine the isentropic efficiency of the turbine

Steam enters an adiabatic turbine steadily at 3 MPa and 300 *C and leaves at 70 Kpa and 100 *C. If the power output of the turbine is 2 MW, determine a) the isentropic efficiency of the turbine and b) the mass flow rate of the steam flowing throug..

  Generate a table of conversions from degrees to radians

Generate a table of conversions from degrees to radians. The first line should contain the value for 0 degrees and last line should contain the value for 360 degrees. allow user to enter the increment to use between the lines in the table

  How many tons of asphalt concrete will be require to overlay

How many tons of asphalt concrete will be required to overlay a 3-mile-long, 24-ft.-wide road with 2.5 in. of wearing course asphalt concrete that has a density of 146.3 pcf

  What is maximum area of spill in if flashover to be avoided

An industrial building has floor area of 5 m by 8 m and is 3 m high with a door 1 m wide and 2 m high. Leakage of transformer oil from a pump occurs and is ignited. What is the maximum area of spill in (m^2) if flashover is to be avoided.

  Find the maximum cargo weight that the barge can carry

Assume you are responsible for determining the maximum load that can be carried by a rectangular barge that is 8 m wide and 18 m long. The water line when the barge is empty is 3 m below the level of the cargo deck.

  Determine what the height should be to force to be critical

Given that uniform flow is subcrital and there is a weir in a rectangular channel, how do you determine what the weir height should be to force the flow to be critical. Draw this transition on a specific energy curve.

  What distance must be cleared from the inside edge

design a horizontal curve with a 40-degree central angle ( delta = 40) for a two-lane road with 11-ft lanes. The design speed is 70 mi/h and superelevation is limited to 0.06 ft/ft. Give the radius, degree of curvature, and length of curve that yo..

  Find what is the range of the values that would be expected

a spot speed study was conducted on a freeway on which the mean speed and the standard deviation were found to be 72 .4 mi/hr and 5.4 mi/hr, respectively. what is the range of the values that would be expected to contain the middle 95 percent of s..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd