How much energy in horsepower is lost by the water

Assignment Help Civil Engineering
Reference no: EM13319496

A pipeline 1200 ft long and 8 in. in diameter has at its inlet point 75ft of available hydraulic energy with respect to the reference level. The velocity in the pipe is 5 fps: the pressure at its end is 12psi. The elevation of the end of the pipe is 10ft above reference level. How much energy in horsepower is lost by the water while flowing through the pipe?

Reference no: EM13319496

Questions Cloud

Determine what is the dry weight of the material : A soil borrow material in its natural state in the ground has a unit weight of 86 pcf. Its natural water content is 9%. What is the dry weight of this material
What is the water content of this borrow material : A soil borrow material in its natural state in the ground has a unit weight of 85 pfc. When a sample of this soil is dried in the laboratory, its dry unit weight is 72 pfc.
Explain the empirical formula of the unknown compound : An unknown compound contains only C, H, and O. Combustion of 4.40 g of this compound produced 8.79 g of CO2 and 3.60 g of H2O. What is the empirical formula of the unknown compound. CHO
Assume that you live in a simple economy in which only : Define inflation.Assume that you live in a simple economy in which only three goods are produced and traded: fish, fruit, and meat. Suppose that on January 1, 2010, fish sold for $2.50 per pound, meat was $3.00 per pound, and fruit was $1.50 per poun..
How much energy in horsepower is lost by the water : A pipeline 1200 ft long and 8 in. in diameter has at its inlet point 75ft of available hydraulic energy with respect to the reference level. The velocity in the pipe is 5 fps: the pressure at its end is 12psi.
Who is the chairman of the audit committee : What are the standards or legislations that management and auditor complied with as according to directors' responsibility paragraph and auditor's responsibility paragraph in the audit report?
Compute the hydraulic energy at the surface of the water : The depth of the water in the flume is 3m. The average velocity is 1.7m/s. Compute the hydraulic energy at the surface of the water and at the bottom of the flume.
Define the empirical formula of a compound : What is the empirical formula of a compound composed of 3.25% hydrogen (H), 19.36% carbon (C), and 77.39% oxygen (O) by mass. HCO
Determine the location e of the shear center for thin walled : Determine the location e of the shear center, pt. O, for the thin-walled member having the cross section shown. The member segments have the same thickness t.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the concentration of pm in the stack at conditions

A stack (T=550*F and P=750mm Hg) was sampled using EPA Method 5. The total gas volume that flowed through the dry gas meter was 2.785 cubic meters (at T=60*F and P=800mm Hg). The mass of particles collected was 1.50g.

  Design a rectangular section for cantilever beam that spans

Roe is the ratio of nonprestressed reinforcement in a section, and roe balanced is the ratio of tensile reinforcing producing balanced strain condition. Show cross sections, including bar sizes, arrangements, and spacing.

  Design assumptions for a rapid-mix tank have been made

Your boss has assigned you the job of designing a rapid-mix tank for the new water treatment plant for the town of Waffle. The design flow rate is 0.050 m^3/s. The average water temperature is 8 degrees celcius.

  Determine the required height z in meters at ground level

Water is contained in a pressurized tank to a level of z meters above the ground. the air pressure over the water surface (in the tank) is 135kPa (abs). Assume the water density is 1000 kg/m^3 and take g=9.807 m/s^2.

  Calculate the mass and volumetric composition of 1 hcp

For a cement paste with an initial water-cement ratio of 0.5, by mass, calculate the mass and volumetric composition of 1 cm^3 of HCP under both wet and sealed curing conditions.

  What is the elongation of the brass rod due to the load

A hollow circular, gray cast-iron pipe supports a red brass rod and weight W = 2 kips, as shown. The outside diameter of the pipe is d = 6". If the allowable compressive stress in the pipe is 5000 psi and the allowable shortening of the pipe is 0...

  Find the partial pressures of the air and water vapor

A space is at a temperature of 75 F, and the relative humidity is 45 percent. find the partial pressures of the air and water vapor

  Determine what is the new flowrate of the channel

The flowrate through an open channel with a slope of 2 % is calculated using Manning's equation at 100 cubic feet per second. If the slope of the channel is doubled to 4%

  How many yards of borrow is require to complete construction

an embarkment will be constructed with the soil compacted to 95 percent of the max dry density. the borrow material, is deposited at a uniform density of 75 percent of the max dry density. the roadway embankment will require 75,000 cubic yards of ..

  Determine what is the actual entropy at the turbine exit

The steam flow rate entering the pipe is 2500kg/hr. Due to heat loss from the pipe to the surrounding air (at 25 C) 20 kg/hr of condensate is formed in the pipe and removed at the end of the pipe.

  Determine what is the discharge from the pipe

Flow occur throught a sand-filled pipe with a cross-sectional area of 60 cm^2. If K is 10^-3 cm/s and the gradient is 0.01, what is the discharge from the pipe

  Derive the expression for the hydraulic radius rh of a pipe

A sprinkler system uses an outdoor reservoir at El 50. A fire pump moves Q = 3 ft^3/sec through a 1.0' dia pipe 300' long to an 8" dia main at El 200. To distribute water to sprinklers, a pressure head at the pipe junction hp =100' is required.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd