How many tubes will the calandria require to concentrate

Assignment Help Civil Engineering
Reference no: EM13559260

Sodium hydroxide solution is to be concentrated from 10% to 30% by weight using a single effect evaporator operating at atmospheric pressure, The liquid circulates through a calandria consisting of 1 m long tubes 32 mm OD and 28 mm ID. Dry saturated steam is circulated through a calandria at 394 K. If the overall heat transfer coefficient is 1.75 kW m-2 how many tubes will the calandria require to concentrate 0.075 kg s-1 of dilute solution?

The specific heat of the solution can be assumed to be constant at 4.18 kJ kg-1 K. The latent heat of evaporation is 2270 kJ kg-1 for the feed and steam, the boiling point rise is 15 K. The feed temperature is 303 K.

Reference no: EM13559260

Questions Cloud

Calculate the minimum number of plates using a total : Using a reflux ratio of twice the minimum reflux, calculate the minimum number of plates using a total condenser and reboiler and a Murphree plate efficiency of 65%.
Equilibrium partial pressure of benzene in gas : Benzene is to be absorbed from coal gas by means of a wash oil. The inlet gas contains 3% by volume of benzene, and the exit gas should not contain more than 0.02% benzene by volume. The suggested oil circulation rate is 5 kg oil per 1m3 of inlet gas..
Find what is the specific heat of the unknown sample : A 100-g aluminum calorimeter contains 250-g of water. Twosubstances are in thermal equilibrium at 10 degrees celcius. Determine the specific heat of the unknown sample
Calculate the number of theoretical stages required : It is proposed to reduce the concentration acetaldehyde in aqueous solution from 55% to 5% by mass, by extraction with solvent S at 293K. If a counter current multiple contactor process is adopted and 0.025 kg/s of solution are treated with an equal ..
How many tubes will the calandria require to concentrate : The specific heat of the solution can be assumed to be constant at 4.18 kJ kg-1 K. The latent heat of evaporation is 2270 kJ kg-1 for the feed and steam, the boiling point rise is 15 K. The feed temperature is 303 K.
Calculate the number of gas transfer units : Air enters a packed column containing 0.015 mol fraction of soluble component A. This is to be reduced to 1% of this value by contacting it with water which is free of A. The gas flow rate is 1 kg m-2 s-1 of and the water entering is 1.6 kg m-2 s-1. ..
What is the volume and density of the object : An object has an actual mass of 2kg and an apparent mass of 1.5kgwhen under water, what is the volume and density of the object
Determine the maximum axial compressive force that can be : A short 60mm diameter circle bar is made of material for which the maximum safe compressive strees is 80 MPa and the maximum safe shearing strees is 30 MPa. determine the maximum axial compressive force that can be safely applied to the bar ?
What is the average power developed by this engine : A Carnot engine operates between the temperatures of850K and 300K. What is the average power developed by this engine

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate for the ground distance of the angular coverage 60

If an aerial photograph is taken with this camera tilted angle­­A=35° at an altitude 5000ft., calculate for the ground distance of the angular coverage 60°.

  How many meters of the block will be above the oil

a 2m cube of block is placed on oil ( SG= 0.8). if the SG of the block is 0.6, how many meters of the block will be above the oil

  Determine magnitude of acceleration at instant of car

A car travels along a horizontal circular curved road that has aradius of 600 m. If the speed is uniformly increased at a rate of 2000 km/ h2 , determine the magnitude of the acceleration at the instant the speed of the car is 60 km/h.

  When will drivers be able to see the full sign

A roadway has a 4% grade intersecting a -7% grade at at station 18+50.00. The grades are connected by an 800 foot vertical curve. A sign is proposed to be installed at Station 15+00.00. The bottom of the sign is 7 feet above the roadway.

  What is the length and azimuth of the line connection points

if point D is at (100,100) and the line DE to "E" is 300 feet long at an azimuth of 225 degree , what is location of point E in the XY coordinate system. what is the length and azimuth of the line connection points (100,100) to (300,500)

  Calculate entropy increase assuming constant specific heat

A paddle wheel, inserted inserted into the volume, does 720 KJ of work on the air. If the volume is 2 cubic meters, calculate the entropy increase assuming constant specific heats.

  What is the total linear impulse acting on the bullet

The force of the expanding gases on a 0.02 kg bullet is given by f=f0-f.1*t . Initially stationary at x=0 , the bullet reaches a speed of 1000 kph by the time it exits the gun

  How fast is the water level rising in the reservoir per day

A reservoir with a length of 20 km and width of 3 km has a flood inflow of 1000 m^3/s. (a) If exit flow is restricted to 500 m^3/s, how fast is the water level rising in the reservoir per day

  What is the minimm work consumed by the compressor

A refrigerator compressor compresses 0.5 kg/s of saturated R-134A vapor at -10C to 1000 kPa and 50C. The compresser has a point that is not insulated and losess heat to the surroundings,

  What are the total delay and the average delay per vehicle

Assuming D/D/1 queuing, when does the initial queue clear and what are the total delay, the average delay per vehicle, longest queue length (in vehicles), and the wait time of 100th vehicle to arrive (assumin first-in-first-out)

  How much energy in horsepower is lost by the water while

A pipeline 1200 ft long and 8 in. in diameter has at its inlet point 75ft of available hydraulic energy with respect to the reference level. The velocity in the pipe is 5 fps: the pressure at its end is 12psi.

  What power is needed from the pump on the water

The total length of the hose is 65 m with 200-mm diameter. The exit diameter of the nozzle is 100 mm. Take e/D for the hose as 0.0001. What power is needed from the pump on the water

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd