How many months will take to have the clay settle 3 inches

Assignment Help Civil Engineering
Reference no: EM13322260

A 10 ft layer of normally consolidated saturated clay is found at depth of 20 ft beneath a formation of partially saturated sandy silt with unit weight of 115 lb/ft cubed. Void ratio of the clay is 1.5 and specific gravity is 2.6. Find the change in thickness of the clay that will occur if the load on the surface increases by 2 tons/ft squared? The clay rests on sounds unweathered rock. Coefficient of consolidation of the clay is 4 ft squared/month. How many months will it take to have the clay settle 3 inches?

Reference no: EM13322260

Questions Cloud

Calculate the percentage of completion : Job costing information is used? a. for internal financial reporting b. to enhance public relations c. to determine target customers d. to calculate the percentage of completion
Write a function named daycount() that accepts a month : Write a function named daycount() that accepts a month, day, and year as its input arguments.
Determine the magnitude of the induced emf : A coil has 480 turns and self-inductance 3.40 mH. At t = 0.0150 s, what is the magnitude of the induced emf
Determine the number of students having scores : Write a program that reads a file ("scores.txt") consisting of students' test scores in the range of 0-200. These scores should be loaded into a one-dimensional array. Then the program should determine the number of students having scores in each ..
How many months will take to have the clay settle 3 inches : A 10 ft layer of normally consolidated saturated clay is found at depth of 20 ft beneath a formation of partially saturated sandy silt with unit weight of 115 lb/ft cubed. Void ratio of the clay is 1.5 and specific gravity is 2.6.
Issue of the new bonds and the refunding of the bonds : Prepare the journal entries necessary to record issue of the new bonds and the refunding of the bonds.
What is the ph at the points in the titration : Calculate the pH at the points in the titration of 40.00 mL of 0.425 M NH3 for the reaction below. NH3(aq) + HNO3 ? NH4+(aq) + NO3?(aq) For NH3, Kb = 1.8x10-5.
Determine the energy dissipated in the jump : A hydraulic jump forms in a horizontal trapezoidal channel. The base width is 4m and the side slopes are 45o. The depths upstream and downstream of the jump are 1m and 3m.
Determining the proper dollar valuation : Determining the proper dollar valuation

Reviews

Write a Review

Civil Engineering Questions & Answers

  Estimate the land area in acres that must be purchased

The city has a stable population of 235,000 residents and the design criteria for the new landfill are as follows: MSW generation rate = 4.0 lb/(person-day); density of the compacted MSW in the landfill is 775 lb/yd3

  Find metric tons of gravel required to fill a excavated area

Calculate the metric tons of gravel required to fill an excavated area 70 meters by 50 meters by 2 meters deep if the gravel has a density of 1890 kg/(m^3).

  Determine flow rate of water that will cause a pressure drop

Determine the flow rate of water (20 degrees celcius) that will cause a pressure drop of 17250 N/m^2 in 350m of horizontal, cast-iron pipe (d=60cm). assume minor losses are negligibe

  Explain how to design for bending only using lrfd

A simply supported steel beam over a 24-ft span carries a uniformly distributed dead load of 2 k/ft, including an allowance for the self-weight, and a live load of 3.5 k/ft. The steel is A992, Grade 50.

  Oxidization of ammonia during nitirification

what is the final dissolved oxygen concentration (in mg/L) in the waste lagoon after all of the ammonium (NH4 + ) is converted to nitrate? Recall that 4.57 mg of O 2 is need per mg of ammonium (as N) oxidized during nitirification. After all of the..

  Determine maximum tensile and compressive bending stresses

A rectangular tube has an outside dimensions that are 2in wide and 4in deep and a wall thickness of 0.25in. The tube is acted on by a bending moment of 12,000lb-in.

  Determine remaining load carrying capacity of cracked beam

a reinforced concrete beam with a section of 12 inches width and 24 inches depth is reinforced with 3no. 9 bars. fc'=5000psi and fy=60000psi. a 2 inch cover is used and the beam has a simply supported span lenght of 15ft.

  Calculate detention time nd horizontal flow-through velocity

45 ft wide, and 14 ft deep and treats 10 mgd. The power input to provide paddle-blade velocities of 1.0 and 1.4 fps for the inner and outer blades, respectively, is 930 ft'lb/s.

  Radius of the steel wire ehen stretching with other wire

The aluminium wire has a radius of 1.1mm. What must be the radius of the steel wire if it is to stretch the same distance as the aluminium wire, so that the two wires maintain equal lengths after the masses are attached?

  How to compute the saturated unit weight of the silt

All the silt is saturated even after the water table is lowered. (In this problem, treat the unit weight above the water table as bulk unit weight and the unit weight below the water table as saturated unit weight.)

  Calculate braking force rb at wheel rim for each system

A bicycle rider would like to compare the effectiveness of candilever hand brakes (use figure a) versus V brakes (figure part b). (a) Calculate the braking force Rb at the wheel rim for each of the bicycle brake systems.

  At what rate must pac be added to meet the proposed standard

A municipal drinking water treatment plant discovers that it has an unacceptably high level of the pesticide carbofuran and must develop a treatment technique to reduce the concentration to satisfy the relevant water quality standard.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd