How high can the hump be made without backing flow up

Assignment Help Civil Engineering
Reference no: EM13299435

A long rectangular channel 12 ft wide is laid on a slope of 2.22 ft per 10,000 ft. The channel has an n-value of 0.016 and carries 352 cfs of water at a normal depth of 9 ft. A smooth hump is placed in the bottom of the channel. What would be the depth of flow over a 3 ft high jump. How high can the hump be made without backing flow up? What would be the depth of flow over and just upstream of a 6 ft high jump?

Reference no: EM13299435

Questions Cloud

Find the speed of the arrow : A soldier has a huge contraption that notches a large 3 kg arrow (it looks more like a lance) in a massive bow, What is the speed of the arrow
Draw a footing detail showing all pertinent design parameter : design a square individual footing to support a 16 inch square reinforced concrete column. service loads include a dead load of 180 kips and a live load of 140 kips. both column and footing have fc=3000psi and fy=60000 psi.
Compute the cash collections from sales for each quarter : The beginning accounts payable balance is $72 million. Assuming all sales are on credit, compute the cash collections from sales for each quarter.
Find how much work is done on the rail car : A rail car that weighs 40 N is accelerated at 6.9 m/s/s for 4.9 seconds. How much work is done on the rail car
How high can the hump be made without backing flow up : A smooth hump is placed in the bottom of the channel. What would be the depth of flow over a 3 ft high jump. How high can the hump be made without backing flow up What would be the depth of flow over and just upstream of a 6 ft high jump
What is the speed of the moving cart before the collision : A 206 kg cart runs into the rear end of a 102 kg cart that is stationary. What is the speed of the moving cart before the collision
Compute the present value of this stream of income : Now compute the present value of the income stream from the gold mine at a discount rate of 6%, and at a discount rate of 4%.
What are the cash flows to tom under each scenario : The company needs a cash infusion of $1.5 million, and it can issue equity or issue debt with an interest rate of 9 percent. Assume there are no corporate taxes.
Evaluate the distance between the charges : Two point charges of equal mass start from rest. What is the distance between the charges and How long will it take the charges to move

Reviews

Write a Review

Civil Engineering Questions & Answers

  Evaluate company performance in relation to GRI standards

Evaluate company performance in relation to GRI standards and comment on Stigler's theory.

  Problem related to skaters with masses

Physics two skaters with masses of 65 kg and 45 kg, respectively stand 8.0 m apart each holding one end of a rope.

  What is the level of service of the upgrade segment

On this segment of freeway, the directional peak-hour volume is 3800 vehicles with 2% large trucks and 4% buses (no recreational vehicles), the peak-hour factor is 0.90, and all drivers are regular users.

  Find out the number of turns in each spring

Find out the number of turns in each spring, if the diameter of the spring wire 14 mm and the diameter of coil is 80 mm. Assume C=84 GN/mmxmm.

  What distribution can be reasonably assumed for sample mean

On a particular highway, a permanent speed measuring device at one particular location has determined, over many months of observations, that the mean and standard deviation of vehicle speeds at that point are 52 miles per hour and 4 miles per hou..

  Determine the value of po

Determine the value of Po, as a funciton of H, for these two investment alternatives to be equivalent at an interest rate of i=15% per year.

  Freeways density and level of service

What will the freeway's density and level of service be before and after the ban? (Assume that the trucks are removed and all other traffic attributes are unchanged).

  Find distance particle will travel before coming to the rest

The acceleration of a particle is defined by the relation a= -0.7v where a is expressed in in/s2 and v in in/s. Knowing that t= o the velocity is 30in/s, determine 1.) the distance the particle will travel before coming to rest

  What force should be applied at the lower edge of the plate

A square plate of uniform thickness has a side length of 25 cm that hangs vertically from hinges at its top edge, When horizontal jet strikes the plate at its center, the plate is deflected and comes to rest at an angle of 30o to the vertical.

  Prtoblem on uniform decelerated motion

Assuming uniformly decelerated motion, determine the velocity and acceleration of point C of the belt, (a) immediately before the power is turned off. (b) 9 s later.

  Calculate the ratio of the area to volume for unit cube

calculate the ratio of the area to volume for unit cube,a unit sphare inscribed inside the cube,and as right cylinder inscribed inside the cube.

  Determine what design speed was used for the curve

A horizontal curve was designed for a four-lane highway for adequate SSD. Lane widths are 12 feet, and the superelevation is 0.06 and was set assuming maximum fx. If the necessary sight distance required 52 feet of lateral clearance from the roadw..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd