How could the process be made reversible

Assignment Help Civil Engineering
Reference no: EM131225491

Heat in the amount of 150 kJ is transferred directly from a hot reservoir at TH= 550 K to two cooler reservoirs at T1 = 350 K and T2 = 250 K. The surroundings temperature is T, = 300 K. If the heat transferred to the reservoir at T1 is half that transferred to the reservior at T2, calculate:

(a) The entropy generation in kJ K-1.

(b) The lost work. How could the process be made reversible?

Reference no: EM131225491

Questions Cloud

Explain the potential personal liability to acme fireworks : Discuss the different employment types and relationships relevant to agency law, and analyze the advantages and disadvantages of each type specific to Acme Fireworks.
How you will apply collaboration in course with your team : Consider the multiple definitions of collaboration. Define collaboration and how you will apply it in this course with your Learning Team. Be sure to reference and cite your sources.
Retained earnings balance at the end of year : For the year, costs were $88,763, interest paid was $20,834 and depreciation was $28,556. What is the retained earnings balance at the end of the year?
Investment strategy of the edithvale retirement fund : Self-Managed Super Funds Case Study. Please provide a review of the current structure and investment strategy of the Edithvale Retirement Fund. Comment on any compliance issues that the fund might currently have and your recommendation on how they ..
How could the process be made reversible : Heat in the amount of 150 kJ is transferred directly from a hot reservoir at TH= 550 K to two cooler reservoirs at T1 = 350 K and T2 = 250 K.
Purchase health insurance : Why or why not? Assuming that she does decide to purchase health insurance, which of the three policies would you recommend and why?
Determine the transresistance transfer function : Find (i) the quiescent drain current IDQ and (ii) the small-signal transistor parameters. - Determine the transresistance transfer function Az f = vo/is.
Write a query or queries to print the table description : Write a query or queries to print the table description and the contents of each table, and copy and paste the results to a file called sales. Write a 1- to 2-page paper describing each constraint you created and why it is necessary.
Firm-wide weighted average cost of capital : Suppose a firm has several divisions, each with a unique area of business. What role does the firm-wide weighted average cost of capital play when determining a project's cost of capital in a given division?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find the pressure at the forward and rear corners along the

A closed box with horizontal base 6m x 6m and height of 2m is half-filled with water and is accelerated Ax=4.9 m/sec^2 and Ay=-2.4 m/sec. find the pressure at the forward and rear corners along the bottom.

  Determine depth of zone of saturation below ground level

The natural ground water table at a site is located at a depth of 2m below the ground water. Laboratory tests reveal that the voidratio of the soil is 0.85 while the grain size corresponding to 10%finer is 0.05 mm.

  Find the difference in depth of the liquid from the inside

Liquid flows with a free surface around a bend. The liquid is inviscid and incompressible, and the flow is steady and irrotational. The velocity varied with the radius across the flow as V = 1/r m/s where r is in meters.

  How high did the ball roll before it momentarily stopped

A solid ball starts to roll up a hill with an initial velocity of 50m/s. The ball has a mass of 20 Kg with a 0.75 m radius. How high did the ball roll before it momentarily stopped

  What is your recommendation for the maximum size of coarse

What is your recommendation for the maximum size of coarse aggregate for the following situation?

  What is the maximum pressure on the form in psf

What is the maximum pressure on the form in PSF?

  Determine the maximum bending stress in the strap

An L2 steel strap having a thickness of 0.125 in. and a widthof 2 in. is bent into a circular arc of radius 600 in. Determine the maximum bending stress in the strap.

  Explain lift charts in direct marketing

Lift Charts in direct marketing, The mass-mailing business is often used to illustrate the use of lift charts. Another real world application where the lift charts can be used

  Determine the length of pipe required for coliform

The maximum permissable fecal coliform concentration that may be discharged is 2,000 fecal coliform CFU/L. It is proposed that a pipe carrying the wastewater be used for disinfection process.

  Maximum size of coarse aggregate

What is your recommendation for the maximum size of coarse aggregate for the following situation? A continuously reinforced concrete pavement cross section contains a layer of No. 6 reinforced bars at 15.24 cm centers,

  Estimate the et losses for the area in inches and centimeter

The discharge of the river at the basin outlet is measured at an avarage of 650 cfs. assuming that the charge in storage for the system is essentially zero, estimate the ET losses for the area in inches and centimeters for the year

  What is the new water content

A soil sample with a water content of 14.5% and unit weight of 128.2 lb/cu. ft. was dried to a unit weight of 118.8 lb/cu. ft. without changing its void ratio. What is its new water content (in %)?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd