Hat is the probability that more than 2.5 inches

Assignment Help Civil Engineering
Reference no: EM13211147

The long-term average January precipitation in the Colorado River basin is 1.11 inches, with a standard deviation of 0.60 inches. Assuming a normal distribution, what is the probability that less than 0.5 inches of precipitation will occur in any January? What is the probability that more than 2.5 inches will occur?

Reference no: EM13211147

Questions Cloud

Explain what effect would there be on the calculated value : What effect would there be on the calculated value for the molar enthalpy of dilution if the technician accidently used too much water so that the volume was actually more than 500 mL.
How much of a reduction in the automobile emission : How much of a reduction in the automobile emission rate would be required to achieve the maximum eight-hour average NAAQS for CO at steady state 9ppmv (10.3 mg/m3)?
How that impacts your financial plan : Explain your personal risk tolerance and how that impacts your financial plan and explain your time horizon and how that impacts your financial plan.
Explain how much water can be produced if the gases react : hydrogen and 6.8 * 10^-4 mol of oxygen. How much water can be produced if the gases react?
Hat is the probability that more than 2.5 inches : what is the probability that less than 0.5 inches of precipitation will occur in any January? What is the probability that more than 2.5 inches wil
Determine the maximum displacement of the plate : Determine the maximum displacement of the plate A if the billet strikes the plate with a speed of 8 . Neglect the mass of the springs, rollers and the plates A and B. Take = 4000 , = 40000 .
Determine the molar mass of a protein : The molar mass of a protein is determined from a measurement of the osmotic pressure. If 0.01 grams of the protein is dissolved in 1 ml. and osmotic pressure
Calculate the peak financial requirement : given the following cost expenditures for small warehouse answer project calculate the peak financial requirement, average overdraft.
What must be the radius of the steel wire : What must be the radius of the steel wire if it is to stretch the same distance as the aluminium wire, so that the two wires maintain equal lengths after the masses are attached?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the relative compaction

A dam project specifies 97% compaction. Lab tests on the soil being used indicate that it has a maximum dry density of 1900 kg/m3 at an optimum water content of 13.2%. Field tests give the following results: Field dry density is 1790 kg/m3 and 16...

  Purposes of assessing an economys growth performance

For the purposes of assessing an economy's growth performance, which is the more important statistic, real GDP or nominal GDP? Why?

  Problem related to horizontal cylindrical tank

A horizontal cylindrical tank 4 ft in diameter and 10 ft long is full of water. Find the work done in pumping the water to a point 4 above the top of the tank.

  Engineering ethics and ethical issue

what is the engineering ethics course where to write about any engineering ethical case and discuss the ethical issue?

  Define concentration of pollutant in the effluent leaving

A lagoon with volume 1200 m^3 has been receiving a steady flow of a conservative waste at a rate of 100m^3/day for a long enough time to assume that steady-state conditions apply

  What is the angle theta required for equilibrium

what is the maximum weight of the crate that the system can support? What is the angle theta required for equilibrium?

  Determining the pressure head at the nozzle inlet

Water flows steadily through a horizontal nozzle. The nozzle inlet diameter is 6 in. At the nozzle outlet, where the pressure is atmospheric, the diameter is 2 in. Determine the pressure head at the nozzle inlet to produce a water jet velocity of ..

  Probelm related to when object is thrown downward

An object is thrown downward from a 150-ft cliff with a velocity of 45m/hr so that it makes an angle of 60° with vertical face of the cliff.

  Consolidated-drained triaxial shear test

A consolidated-drained triaxial shear test on a normally consolidated clay yielded a drained friction angle of 28 degrees. If the confining pressure during the test was 15 psi, what was the major principal stress at failure.

  Calculate the coefficient of consolidation

For the soil and foundation conditions in fig. 1, determine the time required to reach 75% consolidation in the clay given the consolidation test results and determine the coefficient of consolidation

  Estimate the daily emissions of sulfur dioxide

Estimate the daily emissions of sulfur dioxide, nitrogen oxides as NO2, and particulate matter from an industrial steam-generating plant equipped with a dry-bottom pulvurized-coal firing system.

  Analyze a structural system of a building

Use modern software tools to analyze a structural system of a building.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd