Find what is the op amp output voltage with a digital input

Assignment Help Civil Engineering
Reference no: EM13310171

The reference current for the DAC0808 is 2.0 mA. With the DAC output connected to the inverting input of an op amp with a feedback resistor of 5.0 kohms, what is the op amp output voltage with a digital input of 0x80

Reference no: EM13310171

Questions Cloud

Find percentage of air voids and voids in mineral aggregates : Find the percentage of Air voids and voids in the mineral aggregate if the asphalt absorption is .5%, and the specific gravities of the aggregate and binder are 2.660 and 1.020 respectively. The unit weight of the mixture is 2.39 Mg/m^3
What are the top three factors that you improved during : The Briargrove Project has successfully completed multiple phases within the corporate offices. The project is prepared to move into remote offices across the organization. In your paper address the 4 key stages of project monitoring and how that wil..
What are two types of variables that can be used for values : What are two types of variables that can be used for values that are less than 128, and describe what is the difference between the variables, how to declare them, and the memory allocated and the numerical range for both.
Discuss the advantages and disadvantages of 8-bit adc : Discuss the advantages and disadvantages of using 8-bit and 10-bit resolution for the analog-to-digital converter.
Find what is the op amp output voltage with a digital input : The reference current for the DAC0808 is 2.0 mA. With the DAC output connected to the inverting input of an op amp with a feedback resistor of 5.0 kohms, what is the op amp output voltage with a digital input of 0x80
Explain what is the strongest bronsted-lowry acid : What is the strongest Bronsted-Lowry acid in the chemical reaction shown below. 2 HNO3 (aq) + Ba(OH)2 (aq) ---> Ba(NO3)2 (aq) + 2 H2O (l) a) HNO3 b) Ba(OH)2 c) Ba(NO3)2 d) H2O
What i have wrote in my proposal : I have my proposal ready, but what I need someone gets it done for me. My Prof. is tough about the plagiarism and what I have wrote in my proposal.
Find the horizontal coordinate of the center of gravity : The track is 10.00 cm wide, 5.00 m long, and 2.78 m high, and is solid. The runway is cut such that it forms a parabola by the equation y = (x - 5)2 / 9
Find how many turns must there be in the output coil : The generator at a power plant produces AC at 24000 V. A transformer steps this up to 345,000 V for transmission over power lines. how many turns must there be in the output coil

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Rankine cycle and thermal efficiency

Determine the rate at which heat is added in the boiler, the power required to operate the pumps, the net power produced by the cycle, and the thermal efficiency.

  Determine the distance traveled by the cart comes to rest

The system is released from rest with no slack in the cable and the spring stretched 120 mm. The coefficient of kinetic friction between the 10 kg cart is 0.25 and the mass of block m is 6.3 kg.

  Determine what is the channel and flow classification

An obstruction is lodged in a 10-ft wide rectangular channel (n = 0.022) that has a botom slope of 0.005. The depth of the channel just upstream of the obstruction is 5.0 ft. If the flow rate is 325 cfs, what is the channel and flow classification

  Determine what are the volume and density of the rock

A piece of rock weighs 301 N in air and has an apparent weight of 202 N when suspended under water. What are the volume and density of the rock

  Determine the maximum internal pressure in mpa

The rivets are 10 mm in diameter, spaced a distance s = 24.4 mm apart, and have an average shear strength of 35 MPa. Determine the maximum internal pressure in MPa if the rivets are not to shear.

  Determine what is the max length of the slotted region

a rectangular bar of length l has a slot in the middle half of its length. the bar has width b, thickness t, and modulus of elasticity E. the slot has a width b/4. the stress in the middle region is 24000 psi, the length is 30 in, andthe modulus o..

  Determine what is the maximum flowrate in the business

A business wishes to discharge salt into a river. the concentration of salt from the business is 210 mg/L. the flow of water in the river (upstream) is 0.5 m^3/s. Upstram the concentration of salt in the river 15 mg/L.

  What is the annual crash rate for section of college street

Over the past 3 years, there have been 14, 13, and 15 crashes on this section of College Street. The two-way ADT on this section is 16,474 vehicles per day. What is the annual crash rate for this section of College Street

  What pressure in psi is applied to water to reduce volume

At normal atmospheric conditions, approximately what pressure in psi must be applied to water 70 F to reduce its volume by 2 %

  Determine maximum speed of the free fall for the sky driver

A sky diver with a mass of 75 kg jumps from an aircraft. The aerodynamic drag force acting on the sky diver is known to be Fd = kV^2, where k = 0.228. Determine the maximum speed of the free fall for the sky diver and the speed reached after 100 m..

  How should be the central dip of the cable profile

If a SS concrete beam, prestressed with a force of 2500 kn,effective span = 10m. It carries a load of 40 kN/m, the central dip of the cable profile should be

  Define what is the federal express philosophy toward quality

What is the Federal Express philosophy toward quality? What specific elements/actions has FedEx implemented in its quality improvement history?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd