Find what is the force of thrust in the horizontal direction

Assignment Help Civil Engineering
Reference no: EM13310204

Water flows through the interior of a jet ski at 40ft^3/s. The water enters the boat at 75ft/s at an angle of 30 degrees to the water surface. The exit velocity id 85ft/s in the horizontal direction. The boat is in seawater at 60 degrees F.

What is the force of thrust in the horizontal direction?

Reference no: EM13310204

Questions Cloud

What conditions must be placed on the weights a and b : A surveyor measures an angle with two instruments; call them A and B. Both instruments produced unbiased measurements, but the standard deviation of measurements made with instrument A is twice that of B.
Determine the magnitude of the e-field at the third vertex : Positive point-charges of +36.0 mC (Micro C) are fixed at two of the vertices of an equilateral triangle with sides of 3.30 m, located in vacuum. Determine the magnitude of the E-field at the third vertex
By how many celcius does the filament temperature increase : If the wavelength of a maximum intensity decreases from 1840nm to 1560nm as the bulb's voltage is increased, by how many celcius does the filament temperature increase
What minimum speed must the rocket have : You are part of a searchand- rescue mission that has been called out to look for a lost explorer. What minimum speed must the rocket have just before impact in order to save the explorer%u2019s life
Find what is the force of thrust in the horizontal direction : Water flows through the interior of a jet ski at 40ft^3/s. The water enters the boat at 75ft/s at an angle of 30 degrees to the water surface. The exit velocity id 85ft/s in the horizontal direction. The boat is in seawater at 60 degrees F.
What information can be brought to bear : We do know that the client has an advertising plan and budget in place where in he is presently spending 5% on creation of ad and 95% on airing of the commercial. It has been seen that the quality of advertise designing is falling and not upto the..
Determine what is the rate of water to be added to the tank : A hole at the bottom of a fish tank releases water at a rate given by the free jet equation. The hole at the bottom has a .5" diameter. If the water level is desired to be at 2' high and be at steady state,
Determine the force acting on an electron : Determine the force acting on an electron moving at 2.5 x 10^5 meters per second when it enters a magnetic field perpendicular to its direction of motion
The specific knowledge of market structures : The specific knowledge of market structures gained to the Panera Bread Company.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine stations of pc and pt of simple horizontal curve

The distance AB is measured as 322.33 ft, the angle at A is measured as 32º15' and the angle B is determined to be 41º30'. Determine the stations of the PC and PT.

  Compare the reactor volume required to achieve efficiency

Compare the reactor volume required to achieve 95% efficiency for Completely Mixed Flow Reactor (CMFR) and a Plug Flow Reactor (PFR) for the following conditions. steady-state, first-order reaction, flow rate = 14m3 / day.

  What is the maximum length to which it may be stretched

what is the maximum load that may be applied to a specimen with a cross sectional area of 130 mm^2 without plastic deformation.

  How to calculate the increase in weight of the tank

water flows into a weigh tank for 30 minutes. Calculate the increase in weight of the tank, if the discharge is 1.5 ft^3/s. The temperature is 50 F.

  Determine the angular acceleration of the spool

determine the angular acceleration of the spool and the acceleration of the trailer. The wheels have negligible mass and are free to rotate.

  Find distance required for police officer to overtake car

At the moment when A passes P, the police car begines to accelerate at the constant rate of 6m/s^2 until a speed of 160km/h is achieved, and that speed is then maintained.

  Compute the flexural strength of the load at fracture

A three-point bending test is performed on a glass specimen having a rectangular cross section of height d=5mm and width b=10mm; the distance between support points is 45mm.

  Describe at least four basic features of cpm software

Describe the problem of lack of coordination between design and construction in a traditional contract. In agency CM,what expertise does the CM provide during the pre-design and design phase.

  Determine what is local acceleration along the centerline

velocity of water in the nozzle is given by V=2t/(1-.5x/L)^2. L = 4ft. When x=.5L and t=3s what is the local acceleration along the centerline. What is the convective acceleration.

  Find and plot initial vertical effective stress distribution

A 35 feet diameter oil storage tank is built on a 100 ft thick soil layer. The tank exerts an uniform pressure of 1000 pcf on the ground surface. The groundwater table is 10 ft below the ground surface.

  What is concentration of fe needed to maintain concentration

At a wastewater treatment plant, FeCl3 (s) is added to remove excess phosphate from the effluent. Assume the following reactions occur: FeCl3(s) Fe3+ + 3Cl- Fe3+ + PO4 (3-) FePO4 The equilibrium constant for the second reaction is 10^26.4.

  Derive mathematical relation describing calibration curves

An orifice meter was calibrated for dry air at T=90 F and P=1.3 atm. The calibration data are as follow: dp(inches of water): 0,0.5,1.0,2.0,3.0,4.0,5.0 Q(ft^3/minute): 0,2.0,3.0,4.2,5.0,5.5,5.8

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd