Find what is the angular misclosure of the link traverse

Assignment Help Civil Engineering
Reference no: EM13313199

The azimuth from station A of a link traverse to an azimuth mark is 212o 12' 36". The azimuth from the last station of the traverse to an azimuth mark is 192o 12' 15". Angles to the right are observed at each station: A = 136o 15' 41" , B = 119o 15' 37" , C = 93o 48' 55" , D = 136o 04' 17" , E = 108o 30' 10" , F = 42o 48' 03" , and G = 63o 17' 17" . What is the angular misclosure of this link traverse?

Reference no: EM13313199

Questions Cloud

What is the dry unit weight the saturated unit weight : What is the dry unit weight, the saturated unit weight, and the buoyant unit weight, of a soil having a ratio of 0.5 and a value of Gs of 2.7
Plot the shape of the water surface from the center : a whirlpool is modeled as the combination of a free and a forced vortex. the maximum velocity in the whirlpool is 10 m/s, and the radius at the juncture of the free and the forced vortex is 10m.
Calculate the force acting on a window facing the storm : the wind reaches a speed of 27.8 m/s in a storm. calculate the force acting on a 1m x 2m window facing the storm. the window is in a high-rise building. the air density p= 1.2 kg/m3.
What is your effective borrowing rate : Suggest a strategy for borrowing the $100 million. What is your effective borrowing rate?
Find what is the angular misclosure of the link traverse : The azimuth from station A of a link traverse to an azimuth mark is 212o 12' 36". The azimuth from the last station of the traverse to an azimuth mark is 192o 12' 15". Angles to the right are observed at each station
Estimate the rate of change in the water surface elevation : The river flow at an upstream gauging station is measured to be 1500 m3/s, and at another gauging station 3 km downstream, the discharge is measured to be 750 m3/s at the same instant of time.
Determining financial strategies to sustain investor : Write a paper of determining financial strategies to sustain investor relations.
Determine the amount of heat that must be transferred : Heat is transferred to the water such that the temperature in the tank remains constant. Determine the amount of heat that must be transferred by the time one half of the total mass has been withdrawn.
Explain the major product of the acid-catalyzed dehydration : The major product of the acid-catalyzed dehydration of of neopentyl alcohol (2,2-dimethyl-1-propanl) has a different carbon skeleton than that of the starting alcohol. suggest a structure for this alkene, and propse a reasonable mechanism for its ..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Draw a queue diagram representing the traffic flow starting

an incident occurs on a freeway that has a capacity in the northbound direction, before the incident, of 4000 veh/h and a constant flow of 2900 veh/h during the morning commute.

  Compute the maximum acceptable service load

Compute the maximum acceptable service load on an A36 steel plate tension member 1/4in.x12in. having a single line of holes parallel to the direction of loading. The load is 25% dead load and 75% live load, and 7/8in. diameter bolts are used.

  How do the crack behaves under the compression

how do the crack behaves under the compression of a concrete cubes under friction between the plates and specimen with stress strain diagram?

  Determine the total crop water requirement

Determine the total crop water requirement including the leaching ratio of a corn crop with a ECt of 1.7mmhos cm-1 if the ECiw of the irrigation water and precipitation is 5 and 0 mmhos cm-1 respectively

  What superelevation rate would you recommend

What superelevation rate would you recommend for a roadway with a design speed of 100 km/hr and a radius of curvature of 500 m? Assume f = 0.11.

  Determine the change in length of the aluminum alloy tube

An aluminum alloy tube of length 600mm and circular cross section with an inner diameter of 32mm and an external diameter of 36mm is subjected to an axial tensile force of 25kN. Find the change in length of the tube.

  How many metric tons per day of nox are emitted

A coal-fired power plant produces a net electrical output of 500 MW. The composition of the coal burned is C= 72 %, H= 6 %, S= 3.5 %, O= 6 %, N= 1 %, and ash= 12 % by weight. It's heating value (HV) is 30200 kJ/kg. The net thermal efficiency is 36..

  Projectile shot vertically upward

The height (in meters) of a projectile shot vertically upward from a point 2 m above ground level with an initial velocity of 24.5 m/s is h2+24.5t-4.9t^2 after t seconds. a) When does the projectile reach its maximum height? b) What is the maximum..

  Determine how much air is needed combust the water

Soil material is being assessed as a possible liner for a sanitary landfill. A soil core was collected and brought to the laboratory. A 10-cm tall section of soil has 2 cm of water continuously ponded on it. The area of the core surface is 78 cm^2..

  Explain how to classify the column as slender or non slender

Assume that at one end of the column a clockwise moment of 100 k-ft is present, and that at the other end of the column a counter-clockwise moment of 25 k-ft is present. you may assume that k= 1.

  What is the carbon concentration at 4 mm below surface

A 1045 steel will be heat treated in air at 900 C. What is the carbon concentration at 0.4 mm below the surface after 6 hours

  Find the expanded depth of the bed after the backwash

Find the expanded depth of the bed after the backwash when initial depth of the bed is 3 ft using given conditions. m = 0.01g/cm/sec, T = 25oC, rs = 2.65, r=1, washrate = 1.5 cm/sec, ks2 = 196.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd