Find the swell and shrinkage

Assignment Help Civil Engineering
Reference no: EM13559061

Clay weights 3,000 lb/cu. yd. on its natural state(BCY). After excavating the soil weight is 2,310 lb/cu. yd. After transporting the loose material (LCY) in 12 yard dump trucks, placing it, and compacting the weight of the soil is 3,750 lb/cu.yd.(show your calculations)

a) Find the Swell and Shrinkage

b) Load and Shrinkage Factors

c) A 165,000 cu. ft. pond is to be constructed. How many truck loads are necessary if you use

Reference no: EM13559061

Questions Cloud

Estimate how much weight can be lifted : A force of 250N is applied to a hydraulic jack piston wth a0.1m diameter. If the output piston, which supports the load,has a diameter of .5m,  how much weight can be lifted
Determine the reactor basin volume : An activated sludge plant is to be designed for a population of 4000 persons. The influent flow is 380 Lpcd and the influent BOD5 is 200 mg/L. Pertinent data are: Primary clarifier removes 33% of the influent BOD5, and the state regulatory agency all..
Assignment method related to production scheduling : What is the importance of the assignment method related to production scheduling?
How much weight can be lifted : A force of 250 N is applied to a hydraulic jack pistonwith a 0.1m diameter. If the output piston, which supportsthe load, has a diameter of 0.5m, How much weight can be lifted
Find the swell and shrinkage : Clay weights 3,000 lb/cu. yd. on its natural state(BCY). After excavating the soil weight is 2,310 lb/cu. yd. After transporting the loose material (LCY) in 12 yard dump trucks, placing it, and compacting the weight of the soil is 3,750 lb/cu.yd. (sh..
What is the speed of thegrain of sand : The de Broglie wavelength of a 1 mg grain of sand being blownby the wind is 3x10-29 m. What is the speed of the grain of sand
Project management as a method has been used in building : Project management as a method has been used in building projects
How many trucks are required and what is the production : On a shovel/truck operation the production of the shovel is 293 BCY/h and a job efficiency of 0.75. The trucks used have a capacity of 12 BCY and have a cycle time of 45 min.(excluding loading).
How long does it take this object to pass the ship : a spaceship whose rest length is 350m has a speed of .82c withrespect to a certain reference frame. how long does it take this object to pass the ship

Reviews

Write a Review

Civil Engineering Questions & Answers

  What was students associated perception per reaction time

An engineering student is driving on a level roadway and sees a construction sign 500 ft ahead in the middle of the roadway. the student strikes the sign at a speed of 25 mi/h.

  Over what distance does discharge increase in depth occur

In a short section of a channel carrying a steady discharge of 36 m^3/s, the depth is seen to increase from 1.6 m to 1.75 m. The channel is rectangular, 20 m wide with a bedslope of 0.0002 and Manning n of 0.014.

  A dam project specifies 97 compaction lab tests on the soil

a dam project specifies 97 compaction. lab tests on the soil being used indicate that it has anbspmaximum dry density

  Find the component forces that the flange bolts must resist

Water at 20 degrees centrigrade in a 85 degree reducing bendis used in what is otherwise a continuous pipe. The systemoperating is 0.10 cubic meters per seconds

  Calculate the forces exerted by the water on the bend

Water flows through a horizotal 45 deg reducing bend with a 36 inch. diameter upstream and a 24 inch diameter downstream, at the rate of 20 cfs under a pressure of 15 psi at the upstream end of the bend. Neglecting head loss in the bend, calculate..

  Design of wastewater treatment plant for a community

Consider the design of wastewater treatment plant for a community wiyh average daily and peak hourly wastewater design flows of 2.0 mgd. The raw sewage has an average of 230 mg/l BOD5 and 260 mg/l of suspended solids.

  Calculate the quality of the steam exiting heat exchanger

A chemical plant uses a tube-­within-­a-­tube counterflow heat exchanger to heat air with the use of steam. During steady state operation, the air flows into the exchanger at a rate of 5,000 kg/h and a temperature of 27C and exits at a temperature..

  What is the minimum perimeter of that the blade must have

A rectangular blade weighing 0.02 lbf is kept in the surface of water (sigma=0.073 N/m) solely by surface tension forces. What is the minimum perimeter of that the blade must have so that this is possible

  Define the problem to be researched

When Eurasia restaurant, serving Eurasian cuisine, first opened along Chicago's Michigan Avenue, its novelty brought many diners.

  Why should the direction of access ramps be sloping down

In designing of access ramps for drainage channels, why should the direction of access ramps be sloping down towards downstream?

  Which will cause reaction at the bearing to be equal to zero

Determine the magnitude of which will cause the reaction at the bearing to be equal to zero. The bearings are in proper alignment and exert only force reactions on the rod. Set = 600 .

  Explain metallurgical balance in mineral processing

Metallurgical balance in mineral processing, Assume 2000 short tons of ore were mined, 200 tones were rejected as waste and the tonnage accepted for metallurgical treatment

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd