Find the stresses in the steel and concrete

Assignment Help Civil Engineering
Reference no: EM13754174

A short reinforced concrete column 250mm square carries an axial load of 30 Mg. the column is reinforced with 40 mm diameter bars. if the modulus of elasticity for steel is fifteen times that for concrete, find the stresses in the steel and concrete. If the concrete stress must not exceed 3.9N/mm square what area of steel is required for the column to support60Mg 

Reference no: EM13754174

Questions Cloud

Material for multiple payees and corresponding code section : SIMS and PARTNER opened a business and their checking account included both names. BIG COMPANY, a client of the business issued a check in the amount of $150,000 for future services and made it payable to SIMS, PARTNER, with the names stacked one on ..
Iissue for various con- sumer products : Have you ever been frustrated because you could not get a container of some sort to release the last bit of its contents? The article "Shake, Rattle, and Squeeze: How Much Is Left in That Container?" (Consumer Reports, May 2009: 8) reported on an inv..
Write a paper compare impeachment trials of andrew johnson : Write a 3-5 page paper, compare and contrast the impeachment trials of Andrew Johnson, Richard Nixon, and Bill Clinton. Identify ethical dilemmas presented by each.
What is the entry for the company that provided the service : Performed $1000 in services and spent $100 for additional supplies to complete that service. What is the entry for the company that provided the service? What accounts are effected and why?
Find the stresses in the steel and concrete : A short reinforced concrete column 250mm square carries an axial load of 30 Mg. the column is reinforced with 40 mm diameter bars. if the modulus of elasticity for steel is fifteen times that for concrete, find the stresses in the steel and concrete...
View in the statement of cash flows and the ratios : Max Points: 5.0 choose a publicly traded company, and review its statement of cash flows. Provide a link to the statement in your post. Do not choose a company about which one of your classmates has already posted. Calculate the cash flow ratios pres..
Explain the implications of the risks and techniques : Briefly describe how computers and humans can pose risks to infrastructure assets. Explain the implications of the risks and techniques on critical infrastructure sectors
Compute the equivalent units of production for each input : Fosson Furniture uses a process cost system to account for its chair factory. Beginning inventory consisted of 5,000 units (100% complete as to material, 55% complete as to labor) with a cost of $124,800 materials and $104,500 Compute the equivalent ..
What value of p (in conjunction with self weight : Now consider the same beam with the same length but it is now a simply supported beam. An additional point load, P, is then applied at midspan. What value of P (in conjunction with self weight) will induce cracking? Draw the stress and strain distrib..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the time to obtain a density

The salt water mixes thoroughly with the fresh water and the mixture overflows out of the tank. If the flow rate out of the tank is 60 liters/minute. Assume freshwater is 1000 kg/m^3, and the salty water is 1020 kg/m^3.

  What diameter spherical tank should be used

A spherical tank is being designed to hold 10 moles of Methane Gas at a pressure of 2 bar and a temperature of 70 degrees F. What diameter spherical tank should be used?

  Determine what is the channel and flow classification

An obstruction is lodged in a 10-ft wide rectangular channel (n = 0.022) that has a botom slope of 0.005. The depth of the channel just upstream of the obstruction is 5.0 ft. If the flow rate is 325 cfs, what is the channel and flow classification

  Determine economical number of trucks and direct cost

A project involves transporting iron pipe to a jobsite that is 43 miles from the supplier. The pipe will be hauled in trucks that can carry 16 pipes per load. Each pipe is 20 ft in length. The average haul speed of a truck will be 50 mi./hr and re..

  Determine the discharge coefficient for the nozzle meter

An unknown fluid flows through a horizontal 35-mm-diameter pipe with a Reynolds number of 100,000 and a density of 680 kg/m3. The pressure drop across a 21-mm-diameter nozzle meter placed in the pipe is 4.2 kPa.

  Calculate the maximum belt tension if motion is impending

A belt is wrapped around a pulley for 180 degrees. The loose-side belt tension is 100 lb and the coefficient of static friction is 0.30. Calculate the maximum belt tension if motion is impending.

  Find the slope necessary to sustain a uniform flow

A flow of 90 cfs is carried in a rectangular channel 10ft wide at a depth of 1.6 ft. If the channel is made of smooth concrete (n=0.016), find the slope necessary to sustain a uniform flow at this depth.

  Determine the dimensions of the best cross section

Water is to be transported at a rate of 60,000 gallons/min in uniform flow in an open channel whose surface are lined with clay tile. The bottom slope is 0.0014. Determine the dimensions of the best cross section

  Determine the power that must be supplied to the pump at

Crude oil flows through a level section of the Alaskan pipeline at a rate of 1.6 million barrels per day (1 barrels=42 US gallons) the pipe inside diameter is 48 inch and its roughness is equivalent to galvanized iron.

  What type of aquifer material do you expect in the location

The elevation of water in well A is 300m above sea level and well B is 350m above sea level. The wells are 45m apart. A dye test reveals that the specific discharge between the two wells is about 2.75m/day.

  Determine the stationing and elevation of the pvcs and pvts

Two level sections of an east highway (G=0) are to be connected. Currently, the two sections of highway are seperated by a 4000-ft (horizontal distance), 2% grade.

  Helium gas is compressed is entropically from 1 bar and 25 c

Helium gas is compressed isentropically from 1 bar and 25 C to a pressure of 10 bar. The temperature of Helium after the compression is A) 25 C B) 63 C C) 250 C D) 384 C E) 476 C

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd