Find the pole frequency fc for the fourth pole

Assignment Help Electrical Engineering
Reference no: EM13275544

A certain amplifier has pole frequencies of f1=f2=f3=50MHz. The DC open-loop gain is 10^5. Find the pole frequency fc for the fourth pole so that the phase margin is 30 degrees for beta = 0.1 Also, find the corresponding gain margin.

Reference no: EM13275544

Questions Cloud

Compute the current yield and the promosed yield : Compute the current yield and the promosed yield (use semianual compunding) for the bond the Carters currenty hold and for wach of the three swap candidates
Laboratory linear flow test under a pressure differential : A 10-cm long cylindrical core sample was subjected to a laboratory linear flow test under a pressure differential of 3.4 atm using a fluid of viscosity 2.5 cp. The diameter of the core is 4 cm. A flow rate of 0.35 cc/sec was obtained. Calculate the p..
Determine the equivalent capacitance of the combination : Two capacitors, C1 = 6.00 µF and C2 = 14.0 µF, are connected in parallel and the resulting combination is connected to a 9.00 V battery. What is the equivalent capacitance of the combination
What is the annual rate of return on the bond : If a United States Savings bond can be purchased for $29.50 and has a maturity value at the end of 25 years of $100, what is the annual rate of return on the bond? (Please calculate the arithmetic solution and show your work)
Find the pole frequency fc for the fourth pole : A certain amplifier has pole frequencies of f1=f2=f3=50MHz. The DC open-loop gain is 10^5. Find the pole frequency fc for the fourth pole so that the phase margin is 30 degrees for beta = 0.1 Also, find the corresponding gain margin.
The term construction management : The term " construction management " (CM) has caused some confusion in the construction industry over what CM represents. Some in the industry recognize CM as existing only in the construction phase as opposed to throughout the entire project. Knowin..
What is the illumination on the corners of the bench : A point source light of 9000 cd is mounted 3.3m above the centre of a work bench.The bench measures 4m x 4m, what is the illumination on the corners of the bench ?
Find the inductive and capacitive reactance at resonance : in a RLC series circuit R=500Ω L=0.4mH and C=100pF the circuit is connected to the terminals of an ac source with an rms voltage of 1V, and a variable frequency calculate the following A) resonant frequency
Explain iodine does not have a permanent dipole : Iodine does not have a permanent dipole and is therefore a non-polar molecule. Why Iodine does not have a permanent dipole a) electronegativities of two iodine atoms are identical b) two iodine atoms will cause partial charge separation

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Which is preferred if the target lifetime of the system

(Probability of negative lifetime is negligible) Lifetime of chip 2 is also a Gaussian RV with mean 22,000 and standard deviation 1000 hours. Which is preferred if the target lifetime of the system is (i) 20,000 hours and (ii) 24,000 hours

  What is the future worth for per year of each plan at an age

Mike and Susan hope to retire a few years early, they decided to pay closer attention to the predicted amount of retirement benefits and do some analyses on the numbers. They found that their projected benefits are substantially the same.

  Find the maximum power for the divergence

A photovoltaic cell is to be used with radiation of intensity from 2 to 15mW/cm2. If an optical source with a radius of 0.1cm is 200m away from the sensor, find the maximum power if the divergence is 1.2 x 10-3 rad.

  What are the minimum frequency step increment

A PLL frequency synthesizer has a variable -modulus prescaler of M=10/11 and divider ratios of the A and N COUNTERS OF 40 and 260. the reference frequency is 50khz. what are the VCO OUT PUT FREQUENCY and the minimum frequency step increment

  Calculate the core flux density of an ideal transformer

Considering an ideal transformer with impedance on the secondary, neglecting the winding resistances, leakage inductances and the core loss. N1/N2=3 For a voltage of 120V (rms) at a frequency of 60 Hz applied to winding 1

  Solve communications systems

Give a different equation, in terms of the input and output, to describe the system. Is the system stable?

  Determine what is the net electric field at location

A small object with charge Q1=6nC is located at the origin. A second small object with charge Q2=-5nC is located at m. What is the net electric field at location A m due to Q1 and Q2

  What role does im/it enablement play

By that I mean, how does IM/IT help KL carry out day-to-day operations and transacting, how does it aid management processes, and does it enable KL product and service innovation?

  Determine the total charge flowing into a element

Determine the total charge flowing into a element for 0

  Determine magnetic flux density using mean radius of toroid

Assume the coil around the toroid is one single coil and extends all the way around. A toroid is like a donut with a circular cross section. The following characteristics are given: Toroid material = sheet steel, N = 250 turns Inner Radius

  Compute the sum and average and provide the output

Do this using for loops. For your first prompt you will enter the number N of integers that will follow, then you will be prompted for each integer. Compute the sum and average and provide the output. Do it 3 times using the Matlab, Python, C++

  Find the maximum acceleration that can be measured

An LVDT (Linear Variable Differential Transformer) is used in an accelerometer to measure seismic-mass displacement. The LVDT and signal-conditioning output is 0.31 mV/mm with a +/- 2 cm maximum core displacement.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd