Find the period of alternating vortices shed from boulder

Assignment Help Civil Engineering
Reference no: EM13319521

Find the period of the alternating vortices shed from a boulder in a river under the following conditions: diameter of cylindrically-shaped boulder is 1 m; approach velocity is 1 m/s; water temperature is 15.6 C. Assume the water approaches the boulder as if the boulder were a cylinder standing on its end.

Reference no: EM13319521

Questions Cloud

What is its kinetic energy at the low point : At the low point in it swing, a pendulum bob with a mass of 0.46 kg has a velocity of 2.2 m/s. What is its kinetic energy at the low point
The process of developing and implementing ergonomics : Through the process of developing and implementing their ergonomics programs these persons have gained a good working knowledge of the ergonomic risk factors that are most likely to be present in their workplaces.
State what is the ph at the equivalence point : Exactly 100 mL of 0.15 M HNO2 is titrated with a 0.15 M NaOH solution. What is the pH at the equivalence point. The Kb of NO2- is equal to 2.2 x 10-11.
Find the minimum aperture diameter of a camera : Find the minimum aperture diameter of a camera that can resolve detail on the ground the size of a person (1.5m ) from an SR-71
Find the period of alternating vortices shed from boulder : Find the period of the alternating vortices shed from a boulder in a river under the following conditions: diameter of cylindrically-shaped boulder is 1 m; approach velocity is 1 m/s; water temperature is 15.6 C.
Explain the ph after the addition of naoh : Calculate the pH of the 0.20 M NH/0.26 M NHCl buffer. What is the pH after the addition of 20.0 mL of 0.050 M NaOH to 90.0 mL of the buffer solution? The Kb of ammonia is 1.8 x 10-5.
Estimate the change in entropy for the water from the top : Niagra falls measures 160 feet in height. Based on reasonable assumptions estimate the change in entropy for the water from the top of the falls to the bottom in kJ/kg*K.
What is the total magnification of the two lenses : Two identical converging lenses have focal lengths of 15 cm and are aligned on the same principal axis. What is the total magnification of the two lenses
What will be the depth when the discharge is given : Plot a graph showing the discarge per unit width per unit width q for various depths if the specific energy remains constant at this value. What will be the depth when the discharge is 1/3 of the discharge at critical depth

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the undrained shear strenght-psf of the clay

an unconfined compression test was conducted on a cylindrical clay specimen with the following properties: Peak load at failure = 4.5lb, diameter of sample = 1.2 in.

  Determine the required length of super elevation runoff

A simple highway curve is planned to connect two horizontal tangents that intersect at sta. 2500 + 00.00 at an external angle of 52 degrees. For a design speed of 60 mi/hr and a curve radius of about 1.25 times the minimum allowable

  Determine what is the change in water depth for one year

A pond has a surface area of 1.0 acre. A stream flows into the pond at 1.2 cubic feet per second for the entire year. The evaporation rate, also steady for the entire year, is 1 in. /month. Assume that the pond is in the shape of a cylinder.

  Determine lengths l1 and l2 so the two materials elongate

a solid cylinder of 50 mm diameter and 900 mm length is subjected to a tensile force of 120kN. One part f the cylinder L1 long is of steel, the other part, fastened to steel, is aluminum and is L2 long.

  What is probability that will cross within first four gaps

The traffic on the one-­way main street shown below may be satisfactorily described by a Poisson process with an average rate of arrival of 8 cars per minute. A driver (indicated by the box) on the side street is waiting to cross the main street.

  Determine heat removed in the cooling process in kj per min

atmospheric air at 1.01 bar 30 c and 60 percent relative humidity flows over a set of cooling coils at an inlet flow rate of 1500 m^3/min the liquid which condeness is removed from the system at 17 c

  Calculate the surface area of the clay particles

The surface area of clay particles can be determined by measuring the number of adsorbate molecules it takes to form a monolayer. The adsorbate molecules used for these measurements are usually N2 gas, therefore partial pressure "P" is used instea..

  How to identify the sources of information presented at work

The knowledge of the geological and geotechnical characteristics of the subsoil is a basic step, fundamental to the development of any type of research, evaluation, study or project in the areas of Civil and Environmental Engineering.

  Determine saturated unit weight and effective unit weight

The wet mass of a sample of saturated soil is 520 grams. The dry mass, after oven-drying, is 400 grams. Determine the a) water content b)void ration c)saturated unit weight, and d)effective unit weight

  Calculate the direct runoff using the scs method

A hyetograph has a uniform rainfall intensity of 1.5 in/hr in the first hour, 2.0 in/hr in the second, and 0.75 in/hr in the third. Calculate the direct runoff (in inches) using the SCS method. Assume a curve number of 65.

  How to determine the height of the building in feet

The basic barometer can be used to measure the height of abuilding. If the barometric readings at the top and at the bottomof a building are 28.7 and 29.7 in Hg, respectively, determine the height of the building in feet.

  How to derive the stiffnes of the cantilevered bean

a cantilevered bean has a lenght of L, a cross section area of A, and a flecural rigidity of EI. The free end is free to rotate and displace due to bending. derive the stiffnes of the cantilevered bean. Assume small deformations.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd