### Find the maximum torque on an orbiting charged particle

Assignment Help Electrical Engineering
##### Reference no: EM13252342

Find the maximum torque on an orbiting charged particle if the charge is 1.60E-19C, the circular path has a radius of 0.5E-10m, the angular velocity is 4E16 RAD/S, and B=0.4E-3T.

### Write a Review

#### Compute the line losses and voltage across the load

A simple power system consists of a dc generator connected to a load center via a transmission line. The load resistance is 8 ohms. The transmission line is 40km copper wire of 4 cm diameter. If the voltage at the load side is 400 V, compute Volta..

#### Calculate value of multiplier resistor to obtain full scale

An AC Voltmeter uses a bridge rectifier and 100 ohm PMMC which requires a 1mA DC current for full-scale deflection. Assuming ideal diodes, calculate the value of the multiplier resistor to obtain full scale deflection with 10 V AC applied to the i..

#### Find expressions for p and q from complex power

Let a series R-L-C network be connected to a source voltage V, drawing a current I. a) In terms of the load impedance Z=Z at angle of Z, find expressions for P and Q from complex power considerations.

#### What is its energy after the current drops to zero

1) A 1.5H inductor has a constant current of 2.5A. a) find the energy that it holds b) what is its voltage c) what is its energy after its current drops to zero and stays zero What power is dissipated when a 20 olhm resistor is connected to it

#### Determine the transfer function for band pass filter

Determine the transfer function for a second order band pass filter with specifications. Chebyschev type with 1 db ripple in the pass band Lower cutoff frequency = 100 radians/sec Upper cutoff frequency = 169 radians/sec Pass band gain = 1

#### Determine where the poles nd zeroes of the transfer function

a. Express the transfer function in descending powers of s with the coefficients of the highest power of s unity in both the numerator and denominator. b. Determine where the poles and zeroes of the transfer function are located.

#### Define probability of a false alarm- noise power

Probability of a False Alarm: Noise Power, The fixed threshold of a radar detector was set, assuming a known noise power, to yield P_FA = 10^-6

#### Why is quality a difficult term to define

Why is quality a difficult term to define. how can we improve our understanding of quality?

#### What are the basic elements of a state diagram

What is the purpose of a state diagram, and what information can we derive from it.  What is the major differences between an asynchronous counter/divider and a synchronous one.

#### Determine the hv-side fuses needed to protect

Determine the HV-side fuses needed to protect a 3x140kVA, 12470/208 YNyn0 distribution transformer bank. Show and explain step by step the procedure you employ to solve this question. Use the type K and type T fuse curves

#### Find the heat energy generated by the amplifier

The power amplifier for a car stereo amplifier has a rated output power of 750 watts when operating at room temperature. Assuming a Class B amplifier with the maximum theoretical efficiency is used,

#### Design phase-lag compensator for velocity error constant

Design a phase-lag compensator G_c(s) such that the static velocity error constant K_v is 50 sec^-1 without appreciably changing the location of the original closed-loop poles, which are at: $$s = -2 \pm j\sqrt{6}$$