Find the irreversibility in throttling valve

Assignment Help Civil Engineering
Reference no: EM131233809

Fresh water can be produced from salt water by evaporation and subsequent condensation. An example is shown in Fig. P8.45, where 150 kg/s salt water, state 1, comes from the condenser in a large power plant. The water is throttled to the saturated pressure in the flash evaporator and the vapor, state 2, is then condensed by cooling with sea water. As the evaporation takes place below atmospheric pressure, pumps must bring the liquid water flows back up to P0. Assume that the salt water has the same properties as pure water, the ambient is at 20?C, and there are no external heat transfers. With the states as shown in the table below, find the irreversibility in the throttling valve and in the condenser.

688_f4a131e6-ea4c-472b-a1ca-facf698ebd56.png

1831_27f173a0-cd54-4979-a477-9c486cd25166.png

Reference no: EM131233809

Questions Cloud

Discuss possible strategies that the company could follow : Discuss possible strategies that the company could follow to defend its core business - The strategic direction that the company has followed in the past and the way in which strategic thinking has developed within the past 5 years
What is the most economical option : A construction company is investigating two forming options for a new hotel project. -  The overhead of the project amounts to $90,000 per month. What is the most economical option?
What leadership methods may motivate stakeholders : Describe communication factors that must be considered, so leaders and stakeholders are in agreement with the water sustainability plan as we begin implementation. Discuss the implications that could evolve if a tax increase is not addressed and c..
Find the irreversibility in the process per kilogram of air : Two flows of air, both at 200 kPa mix in an insulated mixing chamber. One flow is 1 kg/s at 1500 K and the other is 2 kg/s at 300 K. Find the irreversibility in the process per kilogram of air flowing out.
Find the irreversibility in throttling valve : Assume that the salt water has the same properties as pure water, the ambient is at 20?C, and there are no external heat transfers. With the states as shown in the table below, find the irreversibility in the throttling valve and in the condenser.
Upgrade technology with new fully-integrated erp system : How do each of the projects below improve supply chain? Outsource the machining and assembly of parts to regional machine shops. Continue in-house assembly lines for final assembly. Develop focus factories or work cells to streamline the production p..
Why should health care managers be aware of this change : What impact does this trend have on the stakeholder groups involved (e.g., patients, providers, administrators, third-party payers, legislators, etc.) for a specific organization specified (e.g., for profit, nonprofit, hospital, outpatient clinic,..
Read the case of amvac : Does Amvac have a sustainable business strategy? Why or why not? Should the law prohibit Amvac and others from exporting pesticides barred from use in the United States? Why or why not?
What duration is erection estimated to take : What duration (in work days) is erection estimated to take? - What duration (in work days) is dismantling estimated to take?

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the vertical hydraulic head gradient between

The following data were collected at a nest of piezometers (several piezometers of different depths located within a few feet of each other), each of which is screened (open) only at the bottom.

  Determine the weight of the satellite in pounds

A satellite would have a mass of 200 kg on the surface of the moon. Determine the weight of the satellite in pounds when it is in orbit 10,000 mi. above the surface of the earth.

  Can one collector be temporarily taken out of service

Dust is removed from the airstream of a municipal incinerator by four dust collectors operating in parallel, each handling 1/4 of the total airflow of 200 m3/min. The airstream contains 10 g/m3 of suspended solids.

  Compute the range in h corresponding to range in pressure

Compute the height (h) of the water tank above theground surface to provide a static pressure of 75 psi. Compute the pressure at a point in a building that is 40 feet abovethe ground surface.

  Determie what happens after the memory is full

Assuming approximately 19,296 data points can be held in memory, with a 21X Datalogger (CR23X Micrologger), capturing battery voltage; panel temperature; 2 thermocouples

  Find the combined rate of discharge from the two orifices

A tank has two identical orifices, each 5 cm in diameter in one of its vertical sides and are situated one above the other. The upper orifice is 4 m below the water surfaceand the lower one is 6 m below the water surface.

  What was the shear stress on the failure plane at failure

At a confining pressure of 2000 psi, the first sample failed at 9000 psi. Then at a confining pressure of 5000 psi, the other sample failed at 21000 psi. (a) plot the 2 test results on a shear stress-nomal stress diagram and draw in the Mohr envel..

  Determine the local acceleration and the total acceleration

At point 1 and point 2, it is also measured that dv1/dt = 20 m/s^2 and dv2/dt = 50 m/s^2 respectively. Determine the local acceleration, the convective acceleration, and the total acceleration at point 1 and 2 at t = 0

  Find the probability that an 11 occurs for the first time

A pair of dice is tossed repeatedly. Find the probability that an 11 occurs for the first time on the 6th toss.

  Select different construction materials

Select different construction materials found in the built environment at your choice except concretes and timber.

  Determine by direct integration the polar moment of inertia

a) determine by direct integration the polar moment of inertia of the semiannular area shown with respect to point O b) Using the result of part a, determine the moments of inertia of the given area with respect to the x and y axes

  Determine the maximum safe load for the column

A finished 2 x 4 timber (actual size 1 5/8 in. x 3 1/2 in. x 10 ft long) is used as a fixed-end, fixed-end column. If the modulus of elasticity for the timber is 1600 ksi and a factor of safety of 3 with respect to failure by buckling is specified

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd