Find the hydraulic conductivity of the aquifer

Assignment Help Civil Engineering
Reference no: EM13313858

A confined aquifer 30.0m thick has been pumped from a fully penetrating well at a steady rate of 5,000 m^3/day for a long time. Drawdown at an observation well 15m from the pumped well is 3.0 m and a drawdown at a second observation well 150 m away is 0.30 m. Find the hydraulic conductivity of the aquifer.

Reference no: EM13313858

Questions Cloud

Determine the new value of l if the flowrate stayed the same : When a channel of triangular cross section was new, a flowrate of Q caused the water to reach L = 2 m up the side of the channel. After considerable use, the walls of the channel became rougher and the Manning coefficient, n, doubled.
Quality management and continuous improvement : Quality management and continuous improvement
Define carbon monoxide gas burns in oxygen : Carbon monoxide gas burns in oxygen to form carbon dioxide gas. Write a balanced equation for the reaction and determine the volume of oxygen needed to react completely with 561 mL of CO at 40.0°C and 1.00 atm.
Design a cantilever beam made of reinforced concrete : The rectangular beam is 18 ft long and subjected to a uniformly distributed dead load of 1.5 kip/ft (not including the beam weight), a live load of 1.5 kip/ft, and a load of 2 kip/ft by earthquake effect.
Find the hydraulic conductivity of the aquifer : Drawdown at an observation well 15m from the pumped well is 3.0 m and a drawdown at a second observation well 150 m away is 0.30 m. Find the hydraulic conductivity of the aquifer.
How to calculate the formate ion concentration : Calculate the formate ion concentration and pH of a solution thatis 0.050M in formic acid (HCHO2; Ka=1.8*10^-4) and 0.10M inHNO3
Explain the architecture of a system for serving up : Draw a diagram of, and explain the architecture of a system for serving up dynamic pages from a database. Show the protocols involved, the flow of messages and what types of information the messages contain.
What is the total force on the bottom of a swimming pool : What is the total force on the bottom of a swimming pool (20m by 10m), if the pool has an average depth of 1.50 m
Explain naoh are required to reach the endpoint : If your titration solution is 0.431 M in NaOH, and the endpoint occurs at 13.20 mL of titrant, how many mmol of NaOH are required to reach the endpoint

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the magnitude of the acceleration of point p

A wheel has an angular acceleration of alpha=(0.5*theta) rad/s^2 , where theta is in radians. a) Determine the magnitude of the velocity of point P located on its rim after the wheel has rotated 2 revolutions.

  Determine the flow rate of water through the channel

The flow rate of water flowing in a 3m wide channel is to be measured with a sharp-crested triangular weir 0.5m above the channel bottom with a notch angle of 60°. If the flow depth upstream from the weir is 1.5m

  Deriving the eom for building

Working a problem where there are two one-story buildings of different heights next to each other. Earthquake imparts a base motion z(t) that is a cosine function. I'm given a shape function for a column of height L when deriving the EOM for each ..

  How many rapid sand filters are needed for the plant

A water treatment plant is being designed for a flow of 1.6 m^3/s. How many rapid sand filters, using only sand as the medium, are needed for this plant if cross-sectional area of each filter is 10 m x 20 m

  Determine distance between the stones another second later

A stone A is dropped from rest down a well, and in 1 second another stone B is dropped from rest. Determine the distance between the stones another second later.

  Plot the process on a p-v diagram and a p-t diagram

A frictionless piston-cylinder contains 2kg of nitrogen at 100 kPa absolute and 300 deg K. The system is compressed polyprotically at a 1.4 exponent (n) until the nitrogen reaches a final temperature of 360 deg K.

  Check whether the pressure is adequate for service

If the elevation of the pipeline at the treatment plant is 125 m, estimate the pressure in the pipeline 1 km downstream where the elevation if 110 m. Hint: Use the Colebrook equation to estimate f, and the energy equation to estimate P2 .

  Determine the 10-year peak discharge that will be required

All stormwater will drain as sheet flow to the center, flow into a drop inlet, and travel through a pipe system to the nearest stream. The parking lot will be mowed grass (clay soil) with a slope of 2 percent toward the center.

  What is the peak discharge for an area with characteristics

What is the peak discharge for an area with the following characteristics The rainfall intensity is 120 mm/hour. Land use Area, m2 Forest 10,000 Single family residential 9,000 Parking lots 5,000

  How many tubes will the calandria require to concentrate

Sodium hydroxide solution is to be concentrated from 10% to 30% by weight using a single effect evaporator operating at atmospheric pressure, The liquid circulates through a calandria consisting of 1 m long tubes 32 mm OD and 28 mm ID.

  Estimate how often it will take more than 75 min to repair

Data from service records show that the time to repair a certain machine is normally distrubuted with a mean of 65 min and a standard deviation of 5 min. Estimate how often it will take more than 75 min to repair a machine.

  Find the load p and stress in the aluminum for the stress

The column is composed of two materials, the inner is brass with a diameter of 100mm and the outer is aluminum with a diameter of 150mm. A rigid flat plate is placed on top to insure that both materials move together when compressed.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd