Find the bod concentrations at the outlet of both lagoons

Assignment Help Civil Engineering
Reference no: EM13313323

The municipal wastewater treatment process for a hypothetiical town consists of two separate lagoons being operated in series. The first lagoon has a volume of 4 million gallons, while the second lagoon has a volume of 2.5 million gallons. Average flow into the first lagoon is 650,000 gallons/day. The concentration of BOD (material to be degraded) in the infuent is 175 mg/L, and its concentration in such a system has been observed to decrease according to first-order kinetics with a rate constant of 0.25/day. Presume that both lagoons can be considered well-mixed and to be operating at steady state.

(a) Find the BOD concentrations at the outlet of both lagoons.

(b) If the NPDES permit specifies an outlet BOD of 40 mg/L, might this lagoon system be meeting requirements?

Reference no: EM13313323

Questions Cloud

Determine dilatation and change in volume of the 200m length : determine the dilatation and change in volume of the 200mm length of the rod if A) the rod is made of steel E=200 Gpa v=.30 B)the rod is made of aluminum E=70 Gpa v=.35.
How many excess electrons did you pick up : As you walk across a synthetic-fiber rug on a cold, dry winter day, you pick up an excess charge of -58uc. How many excess electrons did you pick up
Describe the economic boom in urban and rural america : Which of the following best describe the economic boom in urban and rural America? What was the condition of America’s economy following World War I? During the 1920s, American farmers as a group
What is conscientious socializing : Conscientious socializing is described in Chapters 9. What is conscientious socializing? What are the tasks/activities that can be conducted through conscientious socializing? What are the benefits of this method?
Find the bod concentrations at the outlet of both lagoons : The municipal wastewater treatment process for a hypothetiical town consists of two separate lagoons being operated in series. The first lagoon has a volume of 4 million gallons, while the second lagoon has a volume of 2.5 million gallons.
Explain the number of mmol of tert-butyl bromide : The volume of .05 M KOH solution that contains the same number of mmol as .1 mL of tert-butyl bromide? For the number of mmol of tert-butyl bromide, I got .8912 mmol.
What mass of dissolved oxygen would be required to degrade : If 90% of the weight of this brown sugar is sucrose (C12H22O11), what mass of dissolved oxygen would have been required to degrade this mass of sucrose had some not been recovered from the barge prior to its dissolution and dispersion into the riv..
Find what would be the concentration expressed in ppm : If the quantity of ash released from the power plant each minute were to be eventually despersed in 4,000,000 m^3 of air at 25 degrees Celsius and 1 atm, what would be its concentration expressed in ppm
Explain the conceptual terms for analyzing human interaction : Describe the relationship between the cognitive principles and their application to interfaces and products.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Vehicle delay due to queuing

Vehicles begin to arrive at a toll booth at 850 am with an arrival rate of x(t) = 4.1 + .01t (with t in min and x(t) in veh /min.) The toll booth opens at 9am and processes vehicles at a rate of 12 per minute throughout the day. Assuming D/D/1 que..

  Determine what is the outlet air temperature

A total of 13,610 kg/h of air at 1 atm abs pressure and 15.6C is to be heated by passing over a bank of tubes in which steam at 100C is condensing. The tubes are 12.7mm OD, 0.61 m long, and arranged in-line in a square pattern with Sp=Sn= 19.05mm.

  What must be the standard deviation

A distance of 1000 feet is to be taped in a manner to ensure a standard deviation smaller than ±0.06 feet. What must be the standard deviation per 100-ft tape length to achieve the desired precision?

  Inability and green engineering can be integrated

inability and green engineering can be integrated in the four components of materials science and engineering?

  How many cubic feet of seawater

how many cubic feet of seawater, density 60 lb/ft^3, must be processed to recover 1 ton of magnesium, 1,272 ppm?

  Calculate how much energy must be added to the system

A piston-cylinder contains 40 kg water of which 20 kg is saturated liquid. The equilibrium pressure of the system is 100 kPa. a) Find the system initial volume b) The water undergoes an isothermal expansion until the pressure reaches 10 kPa.

  Prove that the forces are equal and that the lines of action

this cuts it down to a single force that you have to solve for, regardless of what type of member it is. Prove that the forces are equal and that the lines of action are along an angle theta. HINT: Use to do equations of equilibrium.

  Explain how to determine the slant range r

The ball is released from position A and drops 0.75m to the incline. If the coefficient of resistitution in the impact is e=0.85, determine the slant range R. See Engineering Mechanics Dynamics meriam and Kraige 7th edition number 3/255 for figure

  Determine what is the height of the pure water column

a closed tank contains two straified non misicble fluid layers and compressed air. the fluid of the tank is saline water (relative density 1.036) with a total depth of 3.5m. the top fluid layer is oil (relative density of 08.2) with a depth of 0.6..

  What are the position and acceleration of body as functions

The velocity of a body is given by v(t) = 2t+t3. The body starts from rest at time t = 0 at position s(0) = (2,-10). What are the position and acceleration of the body as functions of time At what time, t, does the body cross the X-axis

  Determine what is the balance delay for the solution

A proposal has been submitted to replace a group of assembly workers, each working individually, with an assembly line. The following table gives the individual work elements. The demand rate for this job is 1600 units/week (assume 40h/week)

  Determine the length of pipe required at the linear velocity

A wastewater treatment plant must disinfect its effluent before discharging the wastewater to a near-by stream. The wastewater contains 4.5*105 fecal coliform colony-forming units (CFU) per liter.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd