Find temperature of the water at the discharge point

Assignment Help Civil Engineering
Reference no: EM13547975

An industrial waste water treatment plant discharges into a large river. the industrial waste water is at 1m^3/s and contains an ultimate BOD concentration of 300mg/L at a temperature of 30 degrees C and a DO concentration of 2.5mg/L. the velocity of the river is 1.5m/s. Upstream of the point of discharge, the river has a temperture of 11 degrees Celcius, an ultimate BOD of 22mg/L, a DO concentration of 10mg/L and a flow rate of 4m^#/s. the deoxygenation rate and the reoxygenation rate coefficients are 0.15d^-1 and 0.5d^-1 at 20 degrees Celcius respectively.

Find:a) Temperature of the water at the discharge point.

B)dissolved-oxygen concentration at the point of discharge.

C)Dissolved-oxygen deficit at the point of discharge.

D) ultimate BOD at the point of discharge.

Reference no: EM13547975

Questions Cloud

What is the hydraulic residence time of the reactor : Average flow rate = .0022 m^3 /s (190 m^3 /d) Influent Substrate concentration = 250 mg/L as COD (all essentially soluble) Mean cell residence time is to be 5 days Volume of mix tank
Determine the total allocated overhead cost : Calculate a predetermined overhead rate based on direct labor hours and determine the total allocated overhead cost for the months of March, August, and December.
The highest amount of power : What type of research design would be expected to yield the highest amount of power (assuming studies with the same sample size)? a) study using a z test b) study using repeated-measures design
Estimate the temperature increase of the room : If 100 physics students each give off 100 W as they sit in the classroom taking an exam, estimate the temperature increase of the room during the hour-long test
Find temperature of the water at the discharge point : An industrial waste water treatment plant discharges into a large river. the industrial waste water is at 1m^3/s and contains an ultimate BOD concentration of 300mg/L at a temperature of 30 degrees C and a DO concentration
Prepare a lease amortization schedule : Prepare a lease amortization schedule and appropriate entries for Edison Leasing from the inception of the lease through January 1, 2012. Edison's fiscal year ends December 31.
There are several uniform national data bases : There are several uniform national data bases that provide national criminal justice data. Examine three of these reports and how they collect data. In addition, describe the limitations of each of these data bases collection methods
Determine whether a community water supply project : a) What factors must you consider to determine whether a community water supply project should be undertaken?
Calculate the required downpayment and monthly payments : The PV for both options (including the down payments) is the same, $8000. What additional factors should terry consider when deciding which aid the best deal for her?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the largest circle that can be inscribed

What is the largest circle that can be inscribed within a polygon with corner coordinates (600,800), (900, 300), (500, 100), and (100, 40) Find the radius of the largest circle and show how you found it from these coordinates.

  Find the theoretical minimum amount of chlorine required

A stream with a flow of 22 mgd contains 180 mg/L of sodium cyanide in the form of NaCN. Chlorine can be added to destroy the NaCN waste according to the reaction shown below. Find the theoretical minimum amount of chlorine required (in lb/day).

  Enforcement team investigating possible dumping of arsenic

Suppose you are a member of an EPA enforcement team investigating the possible dumping of arsenic into Arbor Lake. You take water samples from the middle of the lake and find that the concentration is 90.0 ppb.

  Determine the compositions and quantities of gas and liquid

Determine the compositions and quantities of gas and liquid when 1 lb mole of a mixture of 30 mole percent methane and 70 mole percent ethanol is brought to equilibrium at 0 F and 500 psia.

  What will be the steady state concentration of selenium in

If the farmer irrigates continuously, what will be the steady state concentration of selenium in the stream downstream from the farm (after the irrigation run-off returns to the stream)?

  Determine expressions for attractive and repulsive energies

Consider some hypothetical X+ - Y - ion pair for which the equilibrium interionic spacing and bonding energy values are 0.38 nm and - 6.38 eV respectively. If it is known that n in the equation has a value of 10

  What is the distance corrected for the erroneous tapelength

A 100 ft steel tape known to be only 99.97ft long (understandard conditions) was used to record a measurem,ent of 215.63ft. What is the distance corrected for the erroneous tapelength

  Determine the exit temperature if the gas is argon helium

Deteemine the velocity of the 30 kg block A if the two blocks are released from rest and the 20 kg block B Moves 0.6 mup the incline .The coefficient of kinetic friction between both blocks and the inclined planes is 0.10

  Determine if the bridge would fail under a given load

Determine if the bridge would fail under a given load. The truck has two axles and the graph should should begin with 1 axle 7 ft into bridge with the other just reaching the bridge.

  How long would figure soil will take to reach contamination

The local engineer concludes that, since the oil must have been destroyed by the soil microorganisms at a rate of 20 mg/kg each year, in one more year the site will be free of all contamination. a. Is this a good assumption

  Determine the required area of the members

The truss is to be constructed of members with equal cross-sectional areas and using a material with yield stress 700 MPa. The structure must be designed to support a mass (m) of 3400 kg with a factor of safety of 3.

  What is the mean section velocity in the expanded section

Water flows at 8 m^3/s through a rectangular channel 4 m wide and 3 m deep. If the velocity is 1 m/s, calculate the flow depth in the channel. If this channel expands downstream to a width of 5m and the depth decreases by 0.5m from the upstream de..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd