User Account

All Pages

Find out the levator of a large building

Assignment Help Civil Engineering
Reference no: EM13875058

The elevator of a large building is to raise a net mass of 400 kg at a constant speed of 12 m/s using an electric motor. Minimum power rating of the motor should be

(a) 0 kW

(b) 4.8 kW

(c)47 kW

(d) 12 kW

(e) 36 kW

Reference no: EM13875058

Questions Cloud

Will transportation cost change with reduction : How else may lead time be reduced? Will transportation cost change with reduction in lead time? Discuss with examples?
Find temperature and pressure in the compressor inlet : The front of a jet engine acts as a diffuser receiving air at 900 km/h, -5°C, 50 kPa, bringing it to 80 m/s relative to the engine before entering the compressor. If the flow area is reduced to 80% of the inlet area find the temperature and pressu..
Describes the different criteria for facility location : reate using a spreadsheet a FLOW PROCESS CHART based on the steps presented in the video NOODLES & CO. Reproduce the same format. This chart lists the different steps of a business or a process
Would you want brian to keep current machine or purchase new : As the owner of Choco-Lots, would you want Brian to keep the current machine or purchase the new one? Why might Brian not prefer to make the decision that the owner of Choco-Lots desires?
Find out the levator of a large building : The elevator of a large building is to raise a net mass of 400 kg at a constant speed of 12 m/s using an electric motor. Minimum power rating of the motor should be
Wet-bulb temperatures of atmospheric : The dry- and wet-bulb temperatures of atmospheric air at 95 kPa are 25 and 17°C, respectively. Determine
Explain how you use rti : Explain how you use RTI.
Determine the maximum possible volume flow rate of gasoline : If the pressure differential between the outlet and inlet of the pump is measured to be 5 kPa and the changes in velocity and elevation are negligible, determine the maximum possible volume flow rate of gasoline.
How does abolitionism enhance different value system : How does abolitionism enhance a fundamentally different value system in the North than is evident in the South - also think of this question in terms of the Woman''s rights movement begun in Northern states after 1848.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Component of the force fac along the axis of strut

Determine the projected component of the force fac along the axis of strut ao. Express the result as a cartesian vector.

  Diameter circular concrete pile required to take a design

Using a safety factor of 2.00 and neglecting the pile dead weight, find the length of a 1' diameter circular concrete pile required to take a design load of 50 kips in a soil composed of two layers.

  Find which is produced with emphasis on temporal distributn

You are assigned the task of using bioremediation to cleanup a hazardous waste site contaminated with Tetrachloroethylene. The site is a shallow surficial sandy aquifer 30 feet deep underlain by a clay unit. The depth to the watertable is 10ft.

  Derive equation for the torque in terms including resistance

A movable cone fits inside a stationary conical depression. If a torque is applied to the cone, the cone will rotate at a certain speed depending on the angles θ and β, the radius r o, and the viscosity μ of the liquid.

  Calculate the coefficient of volume compressibility

In an oedometer test, the void ratio of a clay sample changed from 1.62 to 1.41 as the vertical effective stress imposed on the sample was increased from 100 kPa to 200 kPa. Later on, the vertical effective stress on the sample was decreased

  Determine how much butane would be needed to burn

You have a contaminated air stream containing 1000 ppmV of toluene and you decided to incinerate to a DRE of 99.9%. You are using butane as fuel to reach the temperature and consider the lean toluene has no heating value.

  A combination of the width reduction and the bottom step

A 50 meter wide rectangular channel is carrying a flow of 250 m3/s at a flow depth of 5 meters. To produce critical flow in this channel, determine

  What is reaction rate coefficient assuming first order decay

The half life of Uranium-238 is 4.47 billion years. What is the reaction rate coefficient assuming first order decay

  Explain how to determine the power output of the turbine

The water enters at 1 atm at 10 C and the flow rate through the turbine is 40 m3/s. The water is discharged from the turbine 200 m below the intake at 1 atm and the temperature of the water at the discharge is 10.2 C.

  How to design a simply supported rectangular concrete beam

How to design a simply supported rectangular concrete beam havingcross section of 20 mm by 40 mm and a length of 3 meters that couldcarry a uniform load of 1000 KN.

  Determine the horizontal force the wire exerts on the poles

A telephone wire 5 mm in diameter is suspended between telephone poles spaced 50 m apart. If the wind velocity is 100 km/h and the air is at 2 degrees C, 1 atm, determine the horizontal force (in N) the wire exerts on the poles.

  Which method would be most likely to have the greatest

If an analysis is made of the hydraulic conductivity of a site using permeameter tests of core samples, slug tests of monitoring wells, and pumping tests of production wells, it is often observed that the hydraulic conductivity as measured by each me..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd