Find magnitude of the velocity and acceleration of light

Assignment Help Civil Engineering
Reference no: EM13304120

A search light casts a spot of light on a wall that is 100 m away. The search light is rotating at a constant rate of 4 rad per second. Find the magnitude of the velocity and acceleration of the spot of light on the wall when the search light beam makes a 45 degree angle with the wall.

Reference no: EM13304120

Questions Cloud

What is the value of rs : She notes, though, that this trial-and-error process would be quite tedious, and that the correct rs could be found much faster with a simple Excel model, especially if you use Goal Seek. What is the value of rs?
Determine what is the bod concentration 50 km downstream : The concentration of BOD (an indicator of organic pollution) in a river just downstream of a sewage treatment plant's effluent pipe is 75 mg/L. If the BOD is destroyed by a first order reaction with rate constant equal to 0.05/day
Calculate the molar sakur-tetrode entropy of gaseous argon : Calculate the molar Sakur-Tetrode entropy of gaseous argon at 25 C and atmospheric pressure
What would be the change in the value of this firm : Consider another all-equity firm that does not pay taxes due to large tax loss carry-forwards from previous years. The personal tax rate on interest income is 20 percent, and there are no costs of financial distress.
Find magnitude of the velocity and acceleration of light : The search light is rotating at a constant rate of 4 rad per second. Find the magnitude of the velocity and acceleration of the spot of light on the wall when the search light beam makes a 45 degree angle with the wall.
What was fielding projected loss for march : Fielding has no short term borrowing as of March 1st, 2008. Assume that the interest rate on short term borrowing is 1% per month. What was Fielding's projected loss for March?
Find angular acceleration needed to keep prisoner in beam : Find the angular velocity and angular acceleration needed to keep the prisoner in the beam of the spot light at the moment when the prisoner is 4000 ft away from the spot light.
Which fringe number has a peak intesnity : Approximately which fringe number has a peak intesnity that is 1/2 percent of the central fringe intensity
Determine what portion of the tube needs to be reinforced : The copper pipe has an outer diameter of 2.50 in. and an inner diameter of 2.30 in. if the allowable shear stress in the pipe is 2 ksi, what portion of the tube needs to be reinforced

Reviews

Write a Review

Civil Engineering Questions & Answers

  Allowable shearing stress

The allowable shearing stress is 15 ksi in the steel rod AB and 8 ksi in the brass rod BC. Knowing that the torque of magnitude T=10 kip * in. is applied at A, determine the required diameter of a) rod AB, b) rod BC.

  What torque is the engine producing at the vehicle speed

A 3400-lb car is traveling in third gear (ratio 2.5 to 1) on a level road at its top speed of 130 mi/h. The air density is 0.00206 slugs/cuft. The car has frontal area of 19.8 sqft, a drag coefficient of 0.28, a wheel radius of 12.6 inches, a driv..

  Calculate the speed at impact to a driver at a distance

A large rock became visible to a driver at a distance of 175 ft. Assuming a perception-reaction time of 0.8 s, an initial speed of 42 mi/h, a coefficient of friction of 0.5, and a level roadway, calculate the speed at impact.

  Find what is the annual crash rate for the intersection

The four approach volumes per day at this intersection are 28,648, 23,856, 12,150, and 10,174. The crash totals for the last 3 years are 91, 96, and 87. What is the annual crash rate for this intersection

  Find pipe diameter if the pressure drop is pa per m of pipe

air flows through a horizontal iron tube (e=0.15m) at Q=5.7x10-2 m3/s. find the pipe diameter if the pressure drop is 3.5kPa per 30.5m of pipe. air density = 1.23kh/m3 dynamic vicosity = 1.79 x 10-5 N.s/m2)

  What is the average degree of consolidation for clay layer

A normally consolidated clay layer is 4 m thick (one way drainage). From the application of a given pressure, the total anticipated primary consolidation settlement will be 80mm. What is the average degree of consolidation for the clay layer.

  What are the basic differences between the afl as a labor

What are the basic differences between the AFL as a labor union and the CIO type of union?

  Volume of the lake

Suppose that the distance from the lake outlet to the withdrawal cannot be more than 20 mi. What should be the new volume of the lake?

  Find out the magnitude of the contraction scour

Bridge scour, Determine the magnitude of the contraction scour depth given the following information about the channel and bridge

  Force required to hold the pipe

A 0.3-m diameter pipeline terminates in a nozzle of outlet diameter = 0.15 m. When water flows through this pipe at a rate of 0.25 m3/s, the force required to hold the pipe (N) is most nearly.

  Determine the maximum deflection of collar b

Collar A is dropped 30 inches onto collar B, which is resting on a spring of constant k= 4 lb/in. Assuming perfectly plastic impact (coefficient of restitution e=0), determine the maximum deflection of collar B.

  Compute the max acceptable tensile service load for angle

The service live load is three times the dead load. The 4-in leg contains a single line of 7/8 inch diameter bolts, and the 6 inch leg contains a double gage line of 7/8 inch diameter bolts.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd