Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A pump is to be used to draw seawater from the bay @ an elevation of 0 to a reservoir at a desalination plant that has a water surface elevation of 255 feet. A 12-inch diameter DIP pipe (CHW = 120) which is 625 feet long connects the two bodies of water. For this situation provide the equation of the system curve (IE. Ep in terms of Q) so that it can be overlaid onto various pump curves to select the best pump. There is an intake, which is a protruding pipe in the bay (ke = .85); a check valve (kv = 1.7); three 45° bends (kb = .3); two 90° bends (kb = .7); and an open gate valve (kg = .25)
explain the necessity of super elevation in the design of horizontal curve also prove that rv=v2/{g(fs+e)}
An excavation is proposed for a site consisting of a homogenous, isotropic later of silt clay, 14.24 m thick, above a deep deposit of sand. The groundwater is 2m below ground level outside the excavation. The groundwater level inside the excavatio..
A tire carries a 5,000-lb load and has a pressure of 100 psi. The pavement has a modulus of elasticity of 43,500 psi. A deflection of 0.016 inches is observed at a point on the pavement surface 0.8 inches away from the tire load.
For the soil and foundation conditions in fig. 1, determine the time required to reach 75% consolidation in the clay given the consolidation test results and determine the coefficient of consolidation
The Earth may be considered as a sphere whose diameter is 8000 mi. and whose density is roughly approximated to be 6560 kg/m^3. What is the mass of the Earth in pound-mass and kilograms
A 75g , 30cm--long rod hangs vertically on a frictionless, horizontal axle passing through its center. A 12g ball of clay traveling horizontally at 2.5m/s hits and sticks to the very bottom tip of the rod.
In a certain chemical plant, a closed tank contains ethyl alcohol to a depth of 50 ft. Air at a pressure of 25 psi fills the gap at the top of the tank. Determine the pressure at a closed valve attached to the tank 10 ft above its bottom.
A rectangular channel 2.0 m wide carrying a discharge of 2.5 m3/s is to be fitted with a weir at its downstream end to provide a means of flow measurement as well as to cause heading-up of the water surface.
At a section in a beam the tensile stress due to bending is 70 N/mm 2 and there is a shear stress of 25 N/mm 2 . Determine from first principles, the magnitude and direction of the principal stresses and calculate the max shear stress.
The long-term average January precipitation in the Colorado River basin is 1.11 inches, with a standard deviation of 0.60 inches. Assuming a normal distribution, what is the probability that less than 0.5 inches of precipitation will occur in any ..
Explain how the different physical characteristics and moisture content of soil lead to the different angles of repose, swell, and shrinkage factors. Explain how these factors affect excavation operations and costs.
To float a 160 pound man using helium balloons (assume 0.52 cubic feet per inflated balloon). How many balloons would it take? Assume density of air is 1.29 kg/cubic meter and the density of helium is 0.179 kg/cubic meter.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd